Automotive & Transportation


DuPont
MOLYKOTE® G-407 Anti-Fretting Grease
Ready to Use Product Type: Grease
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal
Features: Oxidation Resistant, Corrosion Resistant, Wide Temperature Operating Range
Chemical Family: Polyglycols, Polyalkylene Glycols (PAG), Polypropylene Glycols
MOLYKOTE® G-407 Anti-Fretting Grease is a polyalkylene glycol (PAG)-based grease designed to be used as a lubricant and corrosion protectant for metal-to-metal applications (e.g., guide pins) in automotive brake calipers. The grease has an operating temperature range of -40 to 150°C (-40 to 302°F).


DuPont
BETAPRIME® 5404
Ready to Use Product Type: Primer
Compatible Substrates & Surfaces: Plastics
Features: Improved Adhesion
BETAPRIME® 5404 is an adhesion-promoting primer for painted and plastic substrates with a short open time. BETAPRIME® 5404 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.


DuPont
Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion
Tear Strength: 46.0 - 46.0 kN/m
Strain at Break: 550.0 - 550.0 %
Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.


DuPont
BETALINK® K1
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Composites, Painted Surfaces, Plastics
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETALINK® K1 is a one-component, elastic and moisture-curing polyurethane-based adhesive. It is a high-elastic adhesive for plastics, composites and paints and can be bonded to themselves or in combination. BETALINK® K1 can be used for spoiler-bonding applications and is for this application TUV-approved.


DuPont
BETASEAL® 15506KN
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 15506KN is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 15506KN is a cold processable, high viscosity, medium modulus, fast-curing glass bonding adhesive that can be used primerless on paint.


DuPont
Kalrez® 0090
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings, Valve Seats
Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant
End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts
Color: Black
Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).


DuPont
Delrin® 500CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.


ELIX Polymers, S.L.
Elixâ„¢ SAN 260G
Polymer Name: Styrene Acrylonitrile Copolymer (SAN)
High flow SAN copolymer. Typical applications: Used as base resin in color concentrates. Can be blended with High Rubber Modifiers (ELIXTM 100 series) to manufacture or modify properties profile of ABS resin and blends containing Polycarbonate. Major benefits: Improved flow ability for ABS grades. Excellent balance of mechanical properties, process ability and esthetics. Easy dispersion for pigments & colorants.


allnex
DAOTAN® TW 6450/30WA
Chemical Family: Polyurethanes (PU), Polycarbonate (PC)
Compatible Substrates & Surfaces: Plastics
Features: Room Temperature Curing, Blocking Resistance, Good Metal Flake Orientation, Excellent Adhesion, Crack Resistance, Good Elasticity, Water Resistance, Good Mechanical Properties, Chipping Resistance, Improved Flexibility
End Uses: Waterborne Coating
DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates


AOC, LLC
Vipel® F013-AAB-00
Polymer Name: Vinyl Ester Resin
Processing Methods: Pultrusion, Spray Lay-Up, Hand Lay-Up, Filament Winding
AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistantVipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment.


Arlon Electronic Materials
Arlon® 85N
Polymer Name: Polyimide (PI)
Function: Prepreg, Laminate
85N is the ultimate polyimide and laminate prepreg system fo PWB's requiring resistance to high temperature, both in process and in end-use applications. Bromine-free chemistry provides Bestin-Class thermal stability for applications with sustained high in-use temperatures as well as for use in lead-free soldering applications.


Carbon Inc.
CarbonResinâ„¢ RPU 60
Polymer Name: Polyurethane (unspecified)
Processing Methods: Digital Light Synthesis, 3D Printing
End Uses: Safety Helmets, Automotive Applications, Automotive Interior Parts, Footwear
Density: 1076.0 - 1076.0 kg/m³
CarbonResinâ„¢ RPU 60 is a tough, abrasion-resistant material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.


Samyang Corporation
TRIREX® 3020HF
Polymer Name: Polycarbonate (PC)
Processing Methods: Injection Molding
TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020HF is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020HF resin grade is designed for injection molding products. High flow viscosity. Transparent colors only.


Samyang Corporation
TRIREX® 3020U(HF)
Polymer Name: Polycarbonate (PC)
Processing Methods: Injection Molding
Additives Included: UV Stabilizer
TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020U(HF) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020U(HF) resin grade is used for Injection molding products. UV stabilized. Low viscosity. Transparent colors only.


Radici Group
Radilon® A ERV1906LK 100 NAT
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Heat Stabilizer, Lubricant (Unspecified)
Radilon® A ERV1906LK 100 NAT is a PA66 13% glass fiber reinforced injection molding grade. Toughened, lubricated and heat stabilized. Suitable for parts requiring improved impact strength along with enhanced stiffness. A typical application are anti-vibration rings.


Dynasol Elastomers
Paracrilâ„¢ BJLT-M50
Polymer Name: Acrylonitrile Butadiene Rubber (NBR)
Chemical Family: Nitrile Rubbers
Features: Low Temperature Flexibility, Low Absorption, Oil Resistant, Oil Resistance, Low Corrosion
Paracril BJLTM50 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer. Packing


Toray
Amilan® CM3001G-30
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 9500.0 - 9500.0 MPa
Amilan® CM3001G30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.


Radici Group
Radilon® BGV 30 Black
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Radilon® BGV 30 Black is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Radilon® BGV 30 Black are: Flame Rated Heat Resistant


Oltchim
PETOL® 28-2Lm
Function: Anti-Foaming Agent, Plasticizer, Intermediate
Chemical Family: Polyols (Polyether)
PETOL 28-2LM is a PPG, with a molecular weight of 4000, with low unsaturation, synthesized with double metal cyano complex catalyst. The product is acidified slightly with phosphoric acid.


Sumitomo Bakelite Company
Durezâ„¢ 29502 B
Polymer Name: Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods: Compression Molding
End Uses: Automotive Applications
Density: 2100.0 - 2100.0 kg/m³
Tensile Strength: 65.0 - 65.0 MPa
Durezâ„¢ 29502 B by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.


DuPont
MOLYKOTE® C-40 High Temperature Chain Lubricant
Ready to Use Product Type: Oil
Application Areas: Bearings, Chains, Industrial Conveyors
Features: Long-term Lubricity, Low Viscosity, High Temperature Resistance
Chemical Family: Polyalkylene Glycols (PAG), Polyglycols
Molykote® C-40 High Temperature Chain Lubricant is a low viscosity fluid dispersion of graphite in synthetic oil. It penetrates inaccessible areas, carrying solid lubricating graphite particles to the point where lubrication films are required. It is designed to lubricate in light to moderate loads at temperatures up to 1000°F.


DuPont
BETASEAL® 16100A
Ready to Use Product Type: Primer, 1K (1 component) Coating, Solventborne Coating
Features: Improved Adhesion
Chemical Family: Polyurethanes (PU)
BETASEAL® 16100A is a solvent-based silane blend type primer. BETASEAL® 16100A is clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive


DuPont
BETASEAL® 1580
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 1580 is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1580 is a cold processable, medium viscous, non-conductive, high modulus, fast-curing glass bonding adhesive which requires a paint primer during the process.


DuPont
BETAFORCE® 2900 TC
Ready to Use Product Type: Conductive Adhesive, 2K (2 component) Adhesive
Application Areas: Batteries
Compatible Substrates & Surfaces: Aluminum, Painted Surfaces, Metal
BETAFORCE® 2900 TC is a thermal conductive two-component polyurethane adhesive, specially developped for battery assembly.


DuPont
BETAMATE® 7120-1F
Ready to Use Product Type: 1K (1 component) Adhesive, Structural Adhesive
Cure Method: Moisture Cure
BETAMATE® 7120-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETAMATE® 7120-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.


DuPont
BETASEAL® X2500 PLUS (A+B)
Ready to Use Product Type: Structural Adhesive, 2K (2 component) Adhesive
Compatible Substrates & Surfaces: Glass
Chemical Family: Polyurethanes (PU)
BETASEAL® X2500 PLUS (A+B) is a two-component polyurethane adhesive for glass and structural bonding applications. It has high viscosity and cures almost independently of moisture.


DuPont
BETASEAL® 57302KN
Ready to Use Product Type: 1K (1 component) Adhesive, Structural Adhesive
Compatible Substrates & Surfaces: Glass
BETASEAL® 57302KN is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.


DuPont
Delrin® 311DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3100.0 - 3100.0 MPa
Delrin® 311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids.


DuPont
Delrin® 500T NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.


DuPont
Delrin® 300CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.


DuPont
Kalrez® 9500
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals
Features: Ozone Resistant, Good Thermal Stability, Low Outgassing, Low Metal Content, Good Mechanical Properties, Low Erosion
End Uses: Semiconductor Applications, Pump Parts
Color: Tan
Kalrez® 9500 perfluoroelastomer parts are a tan product targeted specifically for deposition processes where ozone, ammonia and water vapor are used for processing, e.g. SACVD, FCVD, PECVD curing processes, etc. It has been specifically designed for use in applications where the plasma environment is more chemical, i.e., where oxygen and fluorine radicals are more dominant.


DuPont
Kalrez® 8900
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: O-rings, Seals
Features: Fluorine Gas Resistant, Low Moisture Content, Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Low Outgassing
End Uses: Semiconductor Applications, O Rings
Color: Black
Kalrez® 8900 perfluoroelastomer parts are a black product for oxidation, diffusion, ALD, and LPCVD applications. It offers outstanding thermal stability, very low outgassing and excellent (low) compression set properties. Kalrez® 8900 parts exhibit excellent retention of physical properties at elevated temperatures, have excellent mechanical strength and are well-suited for both static and dynamic sealing applications. A maximum application temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible. Ultrapure post-cleaning and packaging is_x005F standard for all Kalrez® 8900 parts. _x005F