Products results

Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Braskem GF4950HS is a high density polyethylene copolymer offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products.

Braskem America UTEC® 4041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than high density polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

VESTAMID® DX9303 BK E70288 is a PA 612 extrusion compound developed for tubing systems with higher heat resistance requirements. Its melting point is approximately 35°C higher than that of PA 11 and PA 12 compounds, allowing for higher peak temperatures during use. This compound meets the increased demands resulting from higher temperatures in the engine compartment.

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

VESTAMID® MLT 4540 is an established 5-layer tube used in automotive fuel handling systems. It consists of an outer and inner layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). The VESTAMID® MLT 4540 offers good permeation resistance against alcohol-containing fuels and excellent cold impact performance.

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

VESTAMID® MLT 7840 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It features high thermal stability, resistance to oil and fuels, and excellent barrier properties. It is resistant to fuel and finds applications in the automotive and mobility sectors.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAMID® MLT 4800 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It consists of an outer layer of VESTAMID® polyamide 12, a barrier layer of ethylene vinyl alcohol (EVOH), and an inner layer of VESTAMID® polyamide 612. VESTAMID® MLT 4800 offers excellent barrier properties against ethanol-containing fuels and has very low extractables. It exhibits excellent cold impact properties, like all Evonik multilayer systems.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business NORYL™ N225X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N225X resin offers good dielectric strength and strong electrical performance in addition to low moisture absorption and dimensional stability, This material is an excellent candidate for both indoor and outdoor electrical applications.

SABIC's Specialties Business LNP ELCRES EXL9334 is based on Polycarbonate (PC) siloxane copolymer resin. It is a UV stabilized, medium flow opaque material suitable for injection molding (IM) and sheet extrusion applications. This grade offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40°C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. It is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.

SABIC's Specialties Business LEXAN EXL9134 polycarbonate (PC) siloxane copolymer resin is a UV stabilized high flow opaque injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40 deg C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN EXL9134 resin is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business NORYL™ GTX987 resin is a conductive, high performance non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is optimized for primer-less electrostatic painting. NORYL™ GTX987 resin exhibits a low coefficient of thermal expansion (CTE) of ~7. This material is an excellent candidate for automotive applications such as body panels, tank flaps, and tailgates.

LNP STAT-KON KX02764 compound is based on POM (Acetal) copolymer resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive.

SABIC's Specialties Business High strength, hydrolytic stability, low warpage, low specific gravity, and dimensional stability. NORYL PX5534 is an excellent candidate for central heating parts, water filters, and water meter components. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

ELASTOSIL® RT 624 "4S" A/B VS is a pourable, two-component thermal curing silicone specifically designed for fuel cell sealing applications. It features addition curing and offers excellent bonding and sealing capabilities, making it suitable for use in various applications such as cured-in-place gaskets (dry type) and fuel cells.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

Xytron™ G4080HRE is a high-performance plastic compound from is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, It contributes to excellent performance in many different applications. It is best suited for injection molding.

Stanyl® TW341-FC is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.

Akulon® Fuel Lock FLX-LP (K-X08836) is a polyamide 6 (PA 6) resin with excellent properties for use in the automotive and transportation sectors, specifically in fuel systems. It offers good barrier properties and low-temperature impact resistance, making it suitable for use in challenging environmental conditions.

Stanyl® TW341-N is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.

Akulon® Fuel Lock FLE-LP NA99001 is a polyamide 6 (PA 6) resin known for its fuel resistance, good barrier properties, impact modification, lightweight nature, and low permeability. These qualities make it a valuable choice for various applications within the automotive and transportation sectors, including use in automotive exterior and body components, fuel systems, interior elements, and powertrain components.

Akulon® Fuel Lock FLE-LP BK29011 is a polyamide 6 (PA 6) resin with several valuable attributes, including fuel resistance, good barrier properties, impact modification, lightweight characteristics, and low permeability. These features make it an ideal choice for applications in both the automotive and transportation industries and consumer goods manufacturing.

Stanyl® TW341 B-MB is a high-performance polyamide 46 used for applications in automotive, E&E, gears, and outdoor power equipment. It is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.