Safety Systems

226 products found for Safety Systems in Automotive & Transportation
With TDS
Hide Blends
With SDS
Delrin® 500p Nc010 product card banner

DuPont

Delrin® 500P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, a good combination of mechanical properties, and low VOC emissions.

Delrin® 100 Nc010 product card banner

DuPont

Delrin® 100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Delrin® 100p Nc010 product card banner

DuPont

Delrin® 100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Aegis® H100zp product card banner

AdvanSix

Aegis® H100ZP

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Cast Film Extrusion, Pipe, Profile & Tubing Extrusion, Blown Film Extrusion

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Delrin® 527uv Nc010 product card banner

DuPont

Delrin® 527UV NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.

Delrin® 500af product card banner

DuPont

Delrin® 500AF

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: PTFE, PTFE Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2500.0 - 2500.0 MPa

Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Delrin® 500p Bk602 product card banner

DuPont

Delrin® 500P BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, and a good combination of mechanical properties.

Aegis® H100np product card banner

AdvanSix

Aegis® H100NP

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Cast Film Extrusion, Pipe, Profile & Tubing Extrusion, Blown Film Extrusion

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Delrin® 500t Bk602 product card banner

DuPont

Delrin® 500T BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Delrin® 500cpe Nc010 product card banner

DuPont

Delrin® 500CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.

Delrin® 100st Bk602 product card banner

DuPont

Delrin® 100ST BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Delrin® 300cpe Nc010 product card banner

DuPont

Delrin® 300CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.

Delrin® 527uv Bk701 product card banner

DuPont

Delrin® 527UV BK701

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.

Delrin® 500al Nc010 product card banner

DuPont

Delrin® 500AL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 500AL is a medium viscosity acetal homopolymer containing an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.

Delrin® 500t Nc010 product card banner

DuPont

Delrin® 500T NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Kotex K-30uvr Polycarbonate product card banner

Kotec

Kotex K-30UVR Polycarbonate

Polymer Name: Polycarbonate (PC)

Flexural Modulus: 2160.0 - 2160.0 MPa

Kotex K-30UVR is a UV stability, Mould release, Medium viscosity

Delrin® 100st Nc010 product card banner

DuPont

Delrin® 100ST NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Zytel® St801aw Bk195 product card banner

DuPont

Zytel® ST801AW BK195

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Flexural Modulus: 1800.0 - 1800.0 MPa

Zytel® ST801AW BK195 is a Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored offers the best resistance to indirect sunlight in automotive interior applications.

Multiflex® G60 A 21 Bt Z3519n0104a product card banner

DuPont

Multiflex® G60 A 21 BT Z3519N0104A

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Extrusion, Film Extrusion, Injection Molding

Additives Included: UV Stabilizer

Tear Strength: 27.0 - 27.0 kN/m

Strain at Break: 300.0 - 300.0 %

Compression Set (70 °C): 26.0 - 26.0 %

Delrin® 520mp Nc010 product card banner

DuPont

Delrin® 520MP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: PTFE, PTFE Micropowder

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2700.0 - 2700.0 MPa

Delrin® 520MP is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring low wear and friction against steel, itself, or other plastics.

Delrin® 100t Nc010 product card banner

DuPont

Delrin® 100T NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1700.0 - 1700.0 MPa

Delrin® 100T is a toughened, high viscosity acetal homopolymer with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is required.

Delrin® 100 Bk602 product card banner

DuPont

Delrin® 100 BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Hytrel® Dym350bk product card banner

DuPont

Hytrel® DYM350BK

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET), Polybutylene Terephthalate (PBT)

Processing Methods: Injection Molding

End Uses: SRS Pretensioner, Automotive Safety Retractor, Automotive Applications, SRS Adjuster, SRS Seatbelt, SRS Airbag, Safety Restrain System, SRS Actuator, Automotive Safety Pushbutton, SRS Pillar Loop, Automotive Safety, Safety Equipment

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 430.0 - 430.0 MPa

Hytrel® DYM350BK is a medium modulus polyester alloy suited for injection molding of Air Bag Deployment Doors. It has a nominal durometer hardness of 55D and contains fine particle size carbon black.Typical applications:Air bag deployment door.

Aegis® H95zi product card banner

AdvanSix

Aegis® H95ZI

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Pipe, Profile & Tubing Extrusion, Profile Extrusion, Extrusion, Compounding

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Zytel® St801aw Nc010 product card banner

DuPont

Zytel® ST801AW NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 1800.0 - 1800.0 MPa

Zytel® ST801AW NC010 is a Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored offers the best resistance to indirect sunlight in automotive interior applications.

Delrin® 100t Bk602 product card banner

DuPont

Delrin® 100T BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Delrin® 100T is a toughened, high viscosity acetal homopolymer with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is required.

Delrin® 500tl Nc010 product card banner

DuPont

Delrin® 500TL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: PTFE, PTFE Micropowder

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® 500TL is a medium viscosity acetal homopolymer containing 1.5% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring reduced wear and friction against steel, itself, or other plastics.

Delrin® 127uv Nc010 product card banner

DuPont

Delrin® 127UV NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding, Profile Extrusion

Additives Included: UV Stabilizer, Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2600.0 - 2600.0 MPa

Delrin® 127UV is a UV-stabilized high viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 107 in mechanical performance after prolonged UV exposure and thermal stability.

Delrin® 127uv Bk701 product card banner

DuPont

Delrin® 127UV BK701

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 127UV is a UV-stabilized high viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 107 in mechanical performance after prolonged UV exposure and thermal stability.

Delrin® 100p Bk602 product card banner

DuPont

Delrin® 100P BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength and improved processing thermal stability and productivity for injection molding.

Delrin® 511cpe Nc010 product card banner

DuPont

Delrin® 511CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

Flexural Modulus: 3200.0 - 3200.0 MPa

Delrin® 511CPE is a medium viscosity acetal homopolymer with enhanced crystallization for faster cycle times, excellent creep and fatigue resistance, and very low VOC emissions. Delrin® 511CPE provides improved thermal stability, excellent dimensional stability, low warpage, fewer voids, and improved productivity for injection molding.

Delrin® 100te Nc010 product card banner

DuPont

Delrin® 100TE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1850.0 - 1850.0 MPa

Delrin® 100TE is a toughened, high viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. Processing methods include injection molding.

Delrin® 100ale Nc010 product card banner

DuPont

Delrin® 100ALE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Delrin® 100ALE is a high viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It contains an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.

Delrin® 100ste Nc010 product card banner

DuPont

Delrin® 100STE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1250.0 - 1250.0 MPa

Delrin® 100STE is a super-toughened, high viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. Processing methods include injection molding.

Permafelx® 50 product card banner

Rauh Polymers

PermaFelx® 50

Polymer Name: Copolyester Elastomer (COPE)

Processing Methods: Injection Molding

End Uses: Luggage, SRS Airbag, Electrical Connectors, Tubing, Air Ducts, Constant Velocity Joint Boots, Knobs, SRS Seatbelt, Footwear

PermaFlex® is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.