Products results

MoldWiz® EM-1212 - A water-based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

Henan Connect Rubber Chemical ZDMC (PZ) an be used as primary or secondary accelerator for NR, IR, SBR, NBR, IIR, and EPDM.

Robinson Brothers SDBC 20420 acts as fast primary and secondary accelerator in latex.

Technora® Short-Cut Fiber can be converted into short-cut fibers or dipped chopped fibers with a range of lengths, typically between 1 mm and 30 mm, for use in, for instance, resin, cement and rubber reinforcement.

CBS (CZ) Powder is Secondary Sulfonamide. It is grayish white or yellowish powder with slightly odor and nonpoisonous. It is soluble in benzene, methylbenzene, chloroform, carbon disulfide, carbon tetrachloride, methylene chloride, acetone and ethyl acetate; not easily soluble in ethyl alcohol; insoluble in water,dilute acid, dilute alkali and gasoline.

KRAIBURG IIR is a butyl rubber used in applications such as air hoses, inner liners of tires, pharmaceutical stoppers and pipettes, membranes, rubber-coated fabrics, vapor and chemical hoses, safety gloves, etc.

Seast 6 is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

Richon® Antioxidant 3100 is used in Rubber auxiliary agents. An antioxidant which is particularly good in neoprene. It can be used in tire industry as well as many other rubber products. Its performance of anti-ozone, anti-scratch and anti-cracking is far better than antioxidant A and D. DTPD has good long-term performance especially used with the antioxidant 4020 or 4010NA 1:1. Its greatly increased solubility in rubber and the much lower blooming allow a greater using amount. It has little influence on vulcanization and scorch. Its resistance to toxic metal is strongest and its time playing protective effect is longest so that it is particularly fit to applied to demanding truck tires, off-road tires and radial tires and bias tires. It can completely change the defect of red tire result from the application of antioxidant 4010NA and 4020..

Orient Black® N347 is a medium surface area and high structure reinforcing filler grade offers moderate tensile strength and excellent processing characteristics.

Grillo-Werke AG Zinc Oxide 2011 is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

Milagro Rubber 1712 offers a complete range of styrene butadiene rubber (SBR) for the industry today. Their narrow molecular weight distribution makes them ideal for applications including tires, automotive, mechanical rubber goods, footwear, and/or general purpose applications in need of wear resistance and processing versatility.

An Ultra Fast Curing Polymer for Sponge and Dense Extrusions

ULTRA-PEP™ 96 is a combined peptizing and processing additive for natural rubber. ULTRA-PEP™ 96 is easily dispersed in rubber due to its content of dispersing agent present. ULTRA-PEP™ 96 is extremely active and therefore can be used at low dosage levels. Its peptizing action starts at 90 °C but reaches an optimum at 140°C.

Mediaplast NB-4 is a special adipine acid plasticizer at an exceptionally reasonable price for the use in polar polymers like NBR, H- and XNBR, CM / CSM, CR, ECO, etc. Mediaplast NB-4 is, due to its relatively low volatility and also because of its extremely low setting point, suitable for heat-resistant as well as cold flexible rubber articles (see technical data).

Cornerstone Chemical Company Acrylonitrile makes clothing and fabrics more durable and able to hold color and shape longer. Synthetic fibers and rubbers now allow tires to be safely used on cars for more than 60,000 miles, instead of the 20,000 or 30,000 miles we used to get. This reduces the number of tires that go into landfills.

Robinson Brothers ZDBC 22525 can be widely used in active secondary accelerator for dry rubber.

Puyang Changyu Petroleum Resins MBTS(DM) Powder has medium curing rate in NR and SR; suitable for most general rubbers; Used as plasticizer and delay agent in chloroprene rubber. It is usually used together with secondary accelerator in the synthesis of polymers; has better scorch safety than MBT.

Qingdao Zhongsu PE Wax H-20 is a polymerized type.

Mercapto silane for sulfur cured rubber compounds which are containing silica, clays or metal hydroxides as filler. It is suitable for all elastomers and recommended to use if an improvement of technical results, such as tear strength, modulus, compression set or abrasion is required.

Sircon TR (30T), since the material is silicone rubber, it shows stable characteristics even when used for a long time.

JSC Sterlitamak Petrochemical Plant SKS-30 ARK / SBR-1500 is a styrene and butadiene copolymer obtained by emulsification method with the use of mixture of rosin and fatty acids soaps. It is stabilized by non-staining antioxidant.

Finornic Chemicals Finor-MBI-010 is a non staining synergistic antioxidant for natural and synthetic rubbers offering good heat resistance and flex protection in natural and synthetic rubbers as well as latex. Not recommended for Polychloroprene. Easily disperses in rubber.

IRRH Speciality Chemicals Zinc Stearate ISC-400 is biodegradable and non-toxic.

Nanjing Shuguang Chemical Group Accelerant SG-R 704 is used as the super accelerator for natural rubber, synthetic rubber and latex. It can replace ZDBC, ZDEC, PZ due to its lower vulcanization temperature in application. And the processing has better safety. The prominent advantage is that it does not produce the carcinogenic nitroamine in the rubber processing. It can also be a good activator for thiazole accelerator. When this product is added in, the dosage of zinc oxide and sulfur is ordinary, the fatty acid may be needed or not. SG-R 704 may be added to the rubber material directly, or added into latex with dispersing medium. Please refer to the regulation in the related chapters in FDA, BgVV when it is applied to the rubber product which food contact.

FR 64/66SC is a higher melting point product in our fully refined paraffin line. FR 64/66SC meets FDA requirement 21 CFR 172.886. It is a translucent crystalline material in solid state and is a water white, low viscosity, clear liquid when molten. It has excellent gloss and water repellent properties. Its resistance to most alkali and acids is good. Its oil content controlled at or below 0.5% ensures that this product will not stain coated materials.

FloTube™ 6101 CP370-6A10 PP MB 10% contains 10% 6101FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

LESTAC TR100 is terprene resin, also known as polyterprene resin,a pale yellow granular thermoplastic resin obtained from mainly terprene feedstocks either from wood sources or from citrus fruits, by the use of turpentine and α pinene and β pinene, in the role of aluminum trichloride catalyst. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

AquaCast® Is a family of Urethane Elastomer two component Systems: Hardnesses from 10 Shore A to 85 Shore D available with Colorants, UV Inhibitors, Anti-Oxidants, and other additives variable gel times, variable working times.

Shandong Fine Chemical Technology MBT is a general-purpose accelerator that is widely used in various rubbers. It is a medium and super fast vulcanization accelerator for natural rubber and general synthetic rubber. It has a plasticizing effect on natural rubber. It can be used alone or in combination with other additives. Mainly used in the manufacture of tires, hoses, rubber shoes, tapes, cables, etc. The bitter taste is not suitable for the manufacture of rubber products in contact with food.

Nurcacit ETU PDR is a special curing accelerator for chloroprene rubber of CH and W, epichlorohydrin rubber and polyacrylate rubber, suitable for wire, cable, rubber belt and tube, rubber shoes, rubber coat and so on, also suitable for intermediate products of fine chemicals, antioxidant, insecticide, dyestuff, drug and synthetic resin, etc.

Kemai Chemical ACCELERATOR CZ (CBS) is an after-effect accelerator. It has high performance of scorching resistance and short curing time. It mainly used for making tire, rubber tubes, shoes, tapes and cables.

Ecorr® RNR20B66 has the following benefits: Shorter mixing cycles result in lower power consumption. Reduce the temperature of calendering, mixing, and extrusion. The main benefit is cost savings in tire applications.

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

Microsphere® FN-100SS is chlorinated free grade and is medium temperature expansive product.

Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in par-ticular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixers, open mills and conveyor belts will be visibly diminished by the use of Mediaplast AT.

FloTube™ 9101CP240-9A10 PBT MB 10% contains 10% 9101FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.