Marine

1,797 products found for Marine in Automotive & Transportation
Additol® Vxl 4950 product card banner

allnex

ADDITOL® VXL 4950

Brand: ADDITOL

Applications: Marine Coatings, Marine

Product Families: Surface Modifiers, Functional Additives

ADDITOL® VXL 4950 is an adhesion promoting primer for plastics. It must be applied as pre-treatment primer and cannot be used as additive in paints.

Cycat® 4045 Catalyst product card banner

allnex

CYCAT® 4045 Catalyst

Brand: CYCAT

Applications: Marine Coatings, Marine

Product Families: Catalysts & Initiators

CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.

Cardura™ E10p Glycidyl Ester product card banner

Hexion Inc.

Cardura™ E10P Glycidyl Ester

Brand: Cardura

Applications: Marine Coatings, Can Coatings, Industrial Coatings

Product Families: Rheology Modifiers & Stabilizers, Intermediates, Diluents

Chemical Family: Esters

Cardura™ E10P glycidyl ester, the glycidyl ester of Versatic™ acid 10, has been used for decades as a building block for high-performance resins for automotive, industrial and construction applications. Cardura E10P glycidyl ester enables the production of (ultra) high solids and waterborne low viscosity polymers with good substrate wetting, UV and chemical resistance.

Resamin® Hf 480 product card banner

allnex

RESAMIN® HF 480

Brand: RESAMIN

Applications: Marine Coatings, Marine

Product Families: Functional Additives

Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin® HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability.

Ebecryl® Led 02 product card banner

allnex

EBECRYL® LED 02

Brand: EBECRYL

Applications: Marine, Off Road & Commercial Vehicle Coatings, Marine Coatings

Product Families: Functional Additives

EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process.

Biresin® Cr80 product card banner

Sika

Biresin® CR80

Brand: Biresin

Applications: Pipes & Tanks, Marine, Renewable Energy

Product Families: Thermoset Resins

Chemical Family: Epoxy & Epoxy Derivatives

End Uses: Wind Turbine Blades

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fibre reinforced composites parts and moulds with thermal properties up to 80°C.

Gms Composites Ep – 530 product card banner

GMS Composites

GMS Composites EP – 530

Applications: Renewable Energy, Pipes & Tanks, Tooling & Moldmaking

Product Families: Thermoset Prepregs

Chemical Family: Epoxy & Epoxy Derivatives

GMS Composites EP-530 is a flame retardant epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-530 is available in a range of substrates such as carbon, glass or aramid. The product is self-extinguishing and meets the UL 94 V-0 classification. The flow and tack of EP-530 can also be varied.

Divinycell® H100 product card banner

Diab

Divinycell® H100

Brand: Divinycell

Applications: Pavement, Highways, Roads & Bridges, Renewable Energy, Structural Components

Product Families: Foam Cores

End Uses: Structural Components

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Cycat® 6925 product card banner

allnex

CYCAT® 6925

Brand: CYCAT

Applications: Marine Coatings, Marine

Product Families: Functional Additives, Catalysts & Initiators

CYCAT 6925 catalyst is amine-neutralized dodecylbenzene sulfonic acid. It is compliant with FDA 21 CFR Section 175.300 concerning chemicals for use in resinous and polymeric coatings.

Cymel® 1170 Resin product card banner

allnex

CYMEL® 1170 Resin

Brand: CYMEL

Applications: Marine Coatings, Marine

Product Families: Functional Additives

CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after post-forming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes this product a good candidate for coil of metal decoration enamels and primers. In addition, it releases significantly lower amounts of formaldehyde during the baking process compared to other amino resins.

Setalux® 1152 Ss-60 product card banner

allnex

SETALUX® 1152 SS-60

Brand: SETALUX

Applications: Marine Coatings, Marine

Product Families: Acrylics

Chemical Family: Acrylics, Acrylates & Methacrylates

SETALUX® 1152 SS-60 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). SETALUX® 1152 SS-60 is easy in application, even under conditions of high humidity and low temperatures. SETALUX® 1152 SS-60 is capable of high build with practically no yellowing under UV light, has excellent exterior durability, good mechanical properties and chemical resistance.

Last-a-foam® Fr-6720 product card banner

General Plastics

LAST-A-FOAM® FR-6720

Brand: LAST-A-FOAM

Applications: Tooling & Moldmaking, Marine, Aerospace & Aviation

Product Families: Foam Cores

Chemical Family: Polyurethanes (PU)

FR-6700 Aerospace Grade is a CFC-free, rigid, closed-cell, flame-retardant polyurethane foam available in densities ranging from 10 to 25 pounds per cubic foot. It exhibits a high strength-to-weight ratio because of its cellular structure and cross-linked resin. Its closed-cell structure also makes this rigid polyurethane foam series highly resistant to water absorption, so it will not swell, crack or split on exposure to water. The HDU material is stable, inert and resistant to most chemicals and solvents. These characteristics make it an excellent replacement for wood. This series is non-abrasive and can be machined with standard high-speed steel (HSS) cutting tools. It can also be cut cleanly with water jets and traditional wood-carving tools. To save production time, General Plastics can pre-score FR-6700 boards for liquid resin infusion processes.FR-6700 is specifically designed to satisfy the physical property, flammability performance and processing requirements of multiple aerospace and military specifications.

Divinycell® Hcp30 product card banner

Diab

Divinycell® HCP30

Brand: Divinycell

Applications: Marine

Product Families: Foam Cores

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Epolam 2020 product card banner

Sika

Epolam 2020

Brand: Epolam

Applications: Power & Utilities, Marine, Pavement, Highways, Roads & Bridges

Product Families: Thermoset Resins

Chemical Family: Epoxy & Epoxy Derivatives

EPOLAM 2020 is a Variable reactivity by addition of an accelerator Tg ~80°C

Additol® Led 01 product card banner

allnex

ADDITOL® LED 01

Brand: ADDITOL

Applications: Industrial Coatings, Metal Coatings, Coil Coatings

Product Families: Dispersions & Masterbatches

Chemical Family: Acrylics & Acrylates

ADDITOL® LED 01 is a mercapto modified polyester acrylate resin. It is added as co-resin to UV curable formulations, in order to transform them into UV LED curable systems. It is used as co-resin, in order to increase the surface cure of a formulation when cured with an UV LED lamp.

Evopreg Pfc502 product card banner

Composites Evolution

Evopreg PFC502

Brand: Evopreg

Applications: Rail & Mass Transit, Marine, Aerospace & Aviation

Product Families: Thermoset Prepregs

Chemical Family: Epoxy & Epoxy Derivatives

Evopreg PFC502 prepregs are a range of fire-retardant, pre-impregnated composite materialsbased on a PFA (Polyfurfuryl Alcohol) bioresin.PFA is a thermosetting bioresin derived from crop waste and is similar to phenolic resin but withlower toxicity and VOC emissions. In addition to its environmental credentials, PFA hasoutstanding fire retardant properties, plus excellent temperature and chemical resistance.The prepregs can be supplied with a range of reinforcement fibres and fabric constructions,including woven and unidirectional E-glass fibre and carbon fibre. They can be consolidated byvacuum bagging, autoclave or press moulding and are designed for applications includingaircraft interiors, rail interiors, marine, offshore and construction.

Lytex® 9063-E product card banner

Quantum Composites

Lytex® 9063-E

Brand: Lytex

Applications: Refining & Gas Processing, Medical Devices & Assemblies, Implants & Prosthetics

Product Families: Sheet Molding Compounds (SMC)

Chemical Family: Epoxy & Epoxy Derivatives

LYTEX® 9063 BK-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.

Divinycell® Hcp70 product card banner

Diab

Divinycell® HCP70

Brand: Divinycell

Applications: Marine

Product Families: Foam Cores

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Setaqua® 6004 Ya product card banner

allnex

SETAQUA® 6004 YA

Brand: SETAQUA

Applications: Marine Coatings, Marine

Product Families: Alkyds

Chemical Family: Alkyds

SETAQUA® 6004 YA is an urethane modified, co-solvent free short oil alkyd resin emulsion (32% oil)

Bomar® Brc-4421 product card banner

Dymax Corporation

Bomar® BRC-4421

Brand: Bomar

Applications: Other Printing Applications, Architectural Coatings, Film & Foil Coatings

Product Families: Acrylics, Acrylates & Methacrylates, Oligomers

Chemical Family: Urethanes, Acrylics, Acrylates & Methacrylates

Polymer Name: Difunctional Aliphatic Polyester Urethane Acrylate

End Uses: 3D Printing Resins

BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resinswith excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications

Tinox® Cr-1120 product card banner

Tinox Chemie GmbH

Tinox® CR-1120

Brand: Tinox

Applications: Marine Coatings, Marine

Product Families: Color Pigments

CR-1120 is a rutile universal TiO2 pigment from the chloride process which can be used in paints and coatings as well as in plastics. Produced with advanced technologies, particularly in terms of particle size control, this type of pigment shows excellent optical properties. TINOX CR-1120 convinces in the pigmented system by strong hiding power and tinting strength, excellent gloss properties, excellent dispersibility and a blue undertone. CR-1120 has an inorganic surface treatment in combination with a special organic post-treatment, which qualifies wide usage in high gloss paints, coatings for sheets, powder paints and polyolefins, PVC, ABS resins.

Bomar® Brs-14320s product card banner

Dymax Corporation

Bomar® BRS-14320S

Brand: Bomar

Applications: Floor Coatings, Roof Coatings, Overprint Varnishes

Product Families: Oligomers

Chemical Family: Urethanes, Dolomite, Acrylics, Acrylates & Methacrylates

Bomar® BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications

Baltek® Sbc.80 product card banner

3A Core Materials

BALTEK® SBC.80

Brand: BALTEK

Applications: Interior, Exterior & Body, Aerospace & Aviation

Product Families: Wood Cores

BALTEK® SBC is a core material produced from controlled kilndried balsa wood in the ‘end-grain’ configuration with physical time to kiln control. 3A Composites Core Materials owns and manages several thousand hectares of FSC®-certified balsa wood plantations. Its cultivation from seedling to the tree ensures sustainable forest management and strict traceability. Documented and controlled time to kiln-drying makes SBC ideal for vacuum infusion. Own plantations enable 3A Composites to provide a continuous supply to industrial customers. BALTEK® SBC has exceptionally high strength and stiffness to weight ratios and achieves an excellent bond with all types of resins. It is an ideal core material for an extensive range of applications. All while being a renewable resource.

Divinycell® Hp80 product card banner

Diab

Divinycell® HP80

Brand: Divinycell

Applications: Renewable Energy, Marine

Product Families: Foam Cores

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Hexply® M79-m79-lt product card banner

Hexcel

HexPly® M79-M79-LT

Brand: HexPly

Applications: Renewable Energy, Rail & Mass Transit, Marine

Product Families: Thermoset Prepregs

Chemical Family: Epoxy & Epoxy Derivatives

HexPly® M79/M79-LT is a hotmelt, thermosetting, low-exothermic epoxy resin matrix, specifically designed for prepreg applications at which short cure cycles below 100°C are required. M79/M79-LT can be used for manufacture of large industrial components, suitable for cure of thin and thick sections. M79/M79-LT exhibits a long out-life of 8 weeks at ambient conditions. M79 is supplied as moderate tack and M79-LT as low tack resin matrix.

Heucophos® Zpo product card banner

Heubach GmbH

HEUCOPHOS® ZPO

Brand: HEUCOPHOS

Applications: Infrastructure, Roads & Paving, Marine Coatings, Marine

Product Families: Functional Pigments, Functional Additives

Chemical Family: Orthophosphates

HEUCOPHOS® ZPO shows excellent protective behaviour in many binder systems, such as alkyd resins and physically drying systems, due to its special organic modification fixed on the particle surface.

Additol® Xl 180 product card banner

allnex

ADDITOL® XL 180

Brand: ADDITOL

Applications: Marine Coatings, Marine

Product Families: Functional Additives

Additol® XL 180 enhances intercoat adhesion of stoving paints and fast drying air-drying paints on electrodeposition primers, white electrodeposition paints and primers.

Last-a-foam® Rf-2204 product card banner

General Plastics

LAST-A-FOAM® RF-2204

Brand: LAST-A-FOAM

Applications: Other Parts & Components, Housings & Enclosures, Marine

Product Families: Foam Cores

Chemical Family: Polyurethanes (PU)

End Uses: Microwave Antennas

LAST-A-FOAM® RF-2200 is an advanced dielectric material for use in radomes, antennas and other radio frequency (RF) communication systems. This series of machinable, closed cell polyurethane foams provide an RF-transparent, low-loss protective layer for applications requiring optimal performance where electrical insulative materials are needed. Its Tg exceeds 350°F, increasing the customer’s processing window through improved thermal mechanical properties. This makes it suitable for processing high-temperature composite prepregs, such as those found in radomes and other panels.

Hexply® M76 product card banner

Hexcel

HexPly® M76

Brand: HexPly

Applications: Rail & Mass Transit, Marine, Powertrain & UTH

Product Families: Thermoset Prepregs

Chemical Family: Epoxy & Epoxy Derivatives

HexPly® M76 is a versatile curing toughened epoxy resin that can be cured from 275ºF (135ºC) to 350ºF (177ºC), depending on service temperature requirements. HexPly® M76 is formulated for lower temperature autoclave or press mold processing. The recommended lay-up procedure for HexPly® M76 is HSP-L4. The recommended cure procedures are HSP-C5 (275ºF) or HSP-C1 (350ºF).

Hexply® M21 product card banner

Hexcel

HexPly® M21

Brand: HexPly

Applications: Rail & Mass Transit, Marine, Powertrain & UTH

Product Families: Thermoset Prepregs

Chemical Family: Epoxy & Epoxy Derivatives

HexPly® M21 is a high performance, very tough epoxy matrix for use in primary aerospace structures. It exhibits excellent damage tolerance, especially at high energy impacts. HexPly® M21 is a toughened epoxy resin system supplied with unidirectional or woven carbon or glass fibers. HexPly® M21 was developed as a controlled flow system to operate in environments up at 121°C (250°F).

Precision Polymer™ N73b product card banner

Precision Polymer Engineering

Precision Polymer™ N73B

Brand: Precision Polymer

Applications: Pipes & Hoses, Cooling & Climate, Fuel Systems

Product Families: Nitrile Rubbers

Chemical Family: Nitrile Rubbers

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

End Uses: Valve Parts, Valves, Pump Parts

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat ageing and mechanical properties.N73B is accepted by the UK Ministry of Defence (MOD) to Defence Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully moulded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves

Atlac® E-nova Ma 6215 product card banner

Aliancys

Atlac® E-Nova MA 6215

Brand: Atlac

Applications: Marine

Product Families: Vinyl Polymers

Chemical Family: Vinyls, Vinylics & Vinyl Derivatives, Epoxy Vinyl Ester

Polymer Name: Vinyl Ester Resin

End Uses: Marine Applications

Atlac® E-Nova MA 6215 by Aliancys is comprised of Vinyl Ester Resin. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.

Norsodyne® 2834 product card banner

Polynt Group

NORSODYNE® 2834

Brand: NORSODYNE

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

NORSODYNE 2834 - Thixotropic,promoted and non-waxed,good chemical resistance,food grade,Lloyd's approved. Main Applications areas are Automotive,Building and Construction,Industrial sector,Marine etc.

Beckopox™ Eh 606 product card banner

allnex

BECKOPOX™ EH 606

Brand: BECKOPOX

Applications: Marine Coatings, Marine

Product Families: Functional Additives

BECKOPOX™ EH 606 is an aliphatic polyamine adduct. It's a relatively low viscous hardener which can be used with liquid solvent-free epoxy resins.

Norox® Chm-50 Red product card banner

United Initiators

NOROX® CHM-50 RED

Brand: NOROX

Applications: Refining & Gas Processing, Pipes & Tanks, Interior Fixtures

Product Families: Initiators, Promotors & Catalysts

Chemical Family: Peroxides

NOROX®CHM-50 RED is a red dyed solution of cumyl hydroperoxide in an accelerating phlegmatizer. This red dyed version helps to control homogenous mixing. NOROX®CHM-50 RED is a liquid polymerization initiator for the room temperature cure of vinyl ester resins with the following advantages/properties. • Moderate peak exotherm, typically lower than MEKPs • Moderate gel time in vinyl ester resins • Excellent final cure • Low impurity levels (water, hydrogen peroxide, salts, etc.) • No gas generation

Crystic® Polyester Resin 196 product card banner

Scott Bader

Crystic® Polyester Resin 196

Brand: Crystic

Applications: Rail & Mass Transit, Marine, Powertrain & UTH

Product Families: Thermoset Resins

Chemical Family: Polyesters

Crystic Resin 196 is an orthophthalic polyester resin with excellent mechanical properties, impact resistance and electrical performance. Recommended for land transport, marine and industrial applications. It has a 7 minute geltime. A low viscosity version Crystic 196LV is also available.