Building & Construction


Kraton
Kraton™ D1165 P
Polymer Name: Styrene Isoprene Styrene (SIS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Processing Methods: Compounding
Kraton D1165 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1165 PT - supplied as a dusted dense pellet Kraton D1165 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.


Chromaflo Technologies
CHROMA-CHEM® 754-7070
Color: Blue
End Uses: Solventless & High Solids Coating, Solventborne Coating
Compatible Polymers & Resins: Epoxies (EP)
Chroma-Chem® 754-7070 color packs for epoxy coatings consist of a blend of various organic and inorganic pigments milled in a solvent-free liquid epoxy. These color packs use an additive package and a small amount of diluent to provide excellent handling for in-plant or job-site tinting. These color packs are designed as a single-color package that can be mixed into a clear base to produce 24 colors that are typically found in the palette for concrete protective coatings applications. Each color comes pre-blended to match various shades of gray, as well as tan, blue, green, and Red. A Safety Yellow and Safety Red are also included in the color palette.


Kraton
UNI-REZ™ 111
Chemical Family: Polyamides
End Uses: Flexography Ink, Other Ink Types, Gravure Ink
Compatible Substrates & Surfaces: Nitrocellulose
Features: Good Compatibility, Heat Resistance, Broad Range of Viscosity
UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.


GSI Exim America
NIPPOLLAN N-963
Chemical Family: Alcohols, Polycarbonate Diol
Hydroxyl Value: 53.0 - 59.0 mg KOH/g
Features: Water Resistance, High Durability, Heat Resistance
NIPPOLLAN N-963 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.


Asahi Kasei Corporation
Tenac™ 3010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Flexural Modulus: 2800.0 - 2800.0 MPa
Tenac™ 3010 is an Acetal (POM) Homopolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Tenac™ 3010 include automotive, engineering/industrial parts, conveyors and housings.Characteristics include: Flame Rated Creep Resistant Fatigue Resistant Good Dimensional Stability Good Toughness


Peter Greven Nederland C.V.
LIGASTAR CA 600
Function: Lubricant (Internal), Mold Release Agent, Stabilizer, Heat Stabilizer, Release Agent
Compatible Polymers & Resins: Polyvinyl Chloride (PVC), Polycarbonates (PC), Polyamides, Poly(Methyl Methacrylate) (PMMA)
End Uses: Bottles, Caps & Closures, Cups, Cosmetic Packaging, Rigid Packaging, Rigid Films
Chemical Family: Calcium Soaps


Composites Evolution Ltd
Evopreg® PFC502
Polymer Name: Polyfurfuryl Alcohol
Function: Prepreg
Reinforcement Material: Aramid (Kevlar), Glass Fibers, Carbon Fibers, Flax Fibers
Processing Methods: Compression Molding, Vacuum Bagging, Prepreg Processing
Evopreg® PFC502 prepregs are a range of fire-retardant, pre-impregnated composite materialsbased on a PFA (Polyfurfuryl Alcohol) bioresin. PFA is a thermosetting bioresin derived from crop waste and is similar to phenolic resin but withlower toxicity and VOC emissions. In addition to its environmental credentials, PFA hasoutstanding fire retardant properties, plus excellent temperature and chemical resistance. The prepregs can be supplied with a range of reinforcement fibers and fabric constructions,including woven and unidirectional E-glass fiber and carbon fiber. They can be consolidated byvacuum bagging, autoclave or press molding and are designed for applications includingaircraft interiors, rail interiors, marine, offshore and construction.


Kuraray
Kuraray Poval™ 4-88
Polymer Name: Polyvinyl Alcohol (PVOH)
Chemical Family: Polyvinyl Alcohols & Esters, Vinyls, Vinylics & Vinyl Derivatives
KURARAY POVAL™ 4-88 by Kuraray is polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. It is a water-soluble, partially saponified, odorless polymer. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Applicable for use in remoistenable adhesives. KURARAY POVAL™ 4-88 conforms to EU Directive 67/548/EC.


LG Chem
Lutene® LB7500
Polymer Name: Low Density Polyethylene (LDPE)
Processing Methods: Lamination, Extrusion Coating
LUTENE LB7500 is mainly intended for extrusion coating and can be processed uniform thickness and width. LUTENE LB7500 is also noted for the excellent heat stability and has good silicone coating processibility. LB7500 has a good adhesion strength with paper and paper board and excellent neck-in characteristic. LUTENE LB7500 contains no additives.


Asahi Kasei Corporation
Leona™ 14G33
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Heat Stabilizer
Flexural Modulus: 10400.0 - 10400.0 MPa
Leona™ 14G33 is a Polyamide 66 (Nylon 66) product filled with 33% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ 14G33 include automotive, electrical/electronic applications and engineering/industrial parts.Characteristics include: Flame Rated Creep Resistant Fatigue Resistant Heat Resistant Heat Stabilizer


Prime Polymers
Evolue® SP2520
Polymer Name: Metallocene Linear Low Density Polyethylene (mLLDPE), Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion
Melt Flow Index: 1.9 - 1.9 g/10 min
Evolue™ SP2520 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP2520 include film, agricultural, coating applications and industrial applications.Characteristics include: Fast Molding Cycle Good Aesthetics Good Stiffness


Prime Polymers
Evolue® SP0540
Polymer Name: Metallocene Linear Low Density Polyethylene (mLLDPE), Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion, Casting
Melt Flow Index: 3.8 - 3.8 g/10 min
Evolue™ SP0540 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP0540 include film, coating applications and wrap.Characteristics include: Good Sealability Impact Resistant


Braskem North America
I'm Green™ RECYCLED RPR 5A1 WE
Polymer Name: High Density Polyethylene (HDPE)
Processing Methods: Pipe, Profile & Tubing Extrusion, Extrusion, Blow Molding
Melt Flow Index: 0.4 - 0.4 g/10 min
Labeling Claims: Contains PCR Resin, Recycled, Bio-based, Low Carbon Footprint
RPR 5A1 WE is a High Density Polyethylene copolymer resin containing 50% Post-Consumer Recycled (PCR) HDPE. Its properties are comparable to virgin HDPE resins and has an excellent stress-cracking resistance (ESCR) making it ideal for use in a wide range of blow molding applications.


DuPont
Hytrel® 4069
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 45.0 - 45.0 MPa
Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.


Sasol
MULTISO 13/60
Function: Dispersant & Wetting Agent, Emulsifier, Surfactant (Nonionic), Surfactant
Chemical Family: Alcohol Ethoxylates
End Uses: Industrial Cleaners, Metalworking Fluids, Detergents
Labeling Claims: Biodegradable
MULTISO 13/60 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.


AdvanSix
AdvanSix Methyl Ethyl Ketoxime (MEKO)
Function: Crosslinking Agent, Anti-Skinning Agent, Antioxidant, Oxygen Scavenger, Blocking Agent, Corrosion Inhibitor, Intermediate
Compatible Polymers & Resins: Alkyds, Silicones, Polyurethanes (PU)
Labeling Claims: High Purity, Low Water Content
Chemical Name: Methyl Ethyl Ketone Oxime
CAS Number: 96-29-7
Methyl ethyl ketoxime (MEKO) is a high-efficiency anti-skinning agent used for air-drying paints, inks and coatings. It can also be used to improve the shelf life of silicone adhesives and sealants and the functionality of polyurethane coatings. MEKO meets the most stringent standards for low moisture and high assay. As a safe, cost-effective alternative to MEKO, AdvanSix also offers EZ-Blox®, which provides low risk of exposure and an improved toxicology profile. EZ-Blox® does not require costly reformulation or additional research and development, and independent research shows it is safe as a versatile intermediate for use in Adhesives & Sealants, Automotive & Transportation, Building & Construction, Industrial, Packaging, and Paints & Coatings applications.Adhesive & Sealants Construction adhesives and tapes, labels, and graphic art adhesives. Automotive & Transportation Exterior and body parts, bonding and assembly sealants.Building & Construction Building envelope materials, glazing and window elements, construction sealants and caulks, and other infrastructure applications. IndustrialWater treatment applications.PackagingPackaging primer and lacquer coating applications.Paints & CoatingsCoatings for automotive OEM, commercial vehicles, vehicle refinish, off road, agricultural and construction equipment, rail, mass transit, coil, and metal, as well as architectural coatings, decorative paints and coatings, roof coatings, and concrete coatings.


DuPont
Crastin® ST820 BK503
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion
Flexural Modulus: 1500.0 - 1500.0 MPa
Crastin® ST820 BK503 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® 4068FG
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 47.0 - 47.0 MPa
Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.


Sasol
TRIDAC ISO-12
Function: Wetting Agent, Emulsifier, Surfactant (Nonionic), Dispersant, Surfactant, Emulsifier (O/W), Dispersant & Wetting Agent, Solubilizer
Chemical Name: Isotridecanol, Ethoxylated
CAS Number: 69011-36-5
HLB Value: 14.7 - 14.7
End Uses: Detergents, Industrial Cleaners, Metalworking Fluids
TRIDAC ISO-12 is a fatty alcohol polyethyleneglycol ether, based on MARLIPAL 13 and ethylene oxide (about 12 moles). It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.


DuPont
Kalrez® 8575
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings, Valve Seats
Features: Good Elastic Recovery, Low Outgassing, Good Mechanical Properties, Long Seal Life, Low Compression Set, Good Thermal Stability, Less Infrared Absorption
End Uses: Valve Parts, Semiconductor Applications, Valves
Color: White
Kalrez® 8575 perfluoroelastomer parts are a white product for oxidation, diffusion, lamp anneal and RTP sealing applications. Kalrez® 8575 exhibits excellent thermal stability and long-term sealing performance, less Infrared (IR) absorption and significantly reduced outgassing properties at elevated temperatures. It also has good mechanical properties and is well-suited for both static and low stress/low sealing force applications. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for all 8575 parts._x005F


Sasol
NAFOL 1618
Chemical Name: Cetearyl Alcohol
CAS Number: 67762-27-0
End Uses: Hard Surface Cleaners, Industrial Cleaners, Liquid Detergents, Spray Cleaners, Textile Softeners, Metalworking Fluids, Toilet Cleaners, Detergents, Oil & Gas Applications
Features: Emulsifying, Foam Quality, Foam Enhancement
NAFOL Alcohols are blends of high purity linear primary alcohols with even-numbered carbon chain lengths, based on renewable or petrochemical resources. For documents specific to a region, please contact Sasol using the 'Request Document' button.


DuPont
Vespel® CR-6110
Physical Form: Seals
Features: UV Resistant
End Uses: Semiconductor Applications, Bearings
Vespel® CR-6110 shapes are the latest carbon-fiber filled thermoplastic fluoropolymer that have demonstrated outstanding performance in aggressive wet chemical / plasma conditions and elevated temperatures.


DuPont
Zytel® E51HSB NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.


DuPont
Zytel® HTN51G35HSL BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 12600.0 - 12600.0 MPa
Zytel® HTN51G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.


DuPont
Delrin® 100ST NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.


Scott Bader
Crestapol® 1080 Urethane Acrylate Resin
Chemical Family: Styrenics, Acrylics, Acrylates & Methacrylates, Urethanes
End Uses: Pipes & Liners, Tanks
Crestapol® 1080 Urethane Acrylate Resin is an exceptionally tough, flexible, unsaturated urethane acrylate in styrene monomer with a very high elongation. It is used to blend with other polyester and vinylester resins to create a much tougher resin formulation. Addition levels with other resin systems are typically in the region of 5-20%. Crestapol 1080 has been used in military applications, marine, tooling and many building projects requiring exceptional toughness.


Clariant
Dispersogen® PTS
Function: Dispersant & Wetting Agent
End Uses: Waterborne Coating
Labeling Claims: Other Labeling Claims
Solid Content: 90.0 - 90.0 %
Dispersogen® PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks. The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.


DKSH
Luna PTSI P
Applications: Building & Construction, Industrial & Assembly Adhesives, Bonding & Assembly
Product Families: Additives, Functional Additives
Luna-PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna-PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna-PTSI P in the formulation process prevents moisture-related problems. Luna-PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America.


allnex
SETAQUA® 6754
Chemical Family: Acrylics & Acrylates
End Uses: Clearcoat, Waterborne Coating
Compatible Substrates & Surfaces: Wood, Plastics, Metal
Features: Improved Chemical Resistance, High Gloss, High Hardness, Good Blocking Resistance, Good Scratch Resistance, Improved Hardness, Good Adhesion, Chemical Resistant, Scratch Resistance, Excellent Hot Tire Pickup Resistance, Good Abrasion Resistance
SETAQUA® 6754 is An acrylic copolymer dispersion. SETAQUA® 6754 is a very hard self-crosslinking acrylic copolymer dispersion intended for industrial chemical resistant airor force-dry coatings. Pigmented or clear coatings can be formulated with SETAQUA® 6754 which exhibit good hardness, gloss, chemical and blocking resistance.


SANAM Corporation
PELECTRON PVL
Function: Anti-Static Agent
Compatible Polymers & Resins: Polypropylenes (PP), Polyethylenes (PE), Polystyrenes (PS)
Processing Methods: Blown Film Extrusion, Film Extrusion, Dry Blending, Extrusion
End Uses: Appliances, Trays, Electronic Accessory Cases, Battery Cases, Electrical Housing, Protective Coverings, Film
PELECTRON PVL is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVL exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.


allnex
ADDITOL® VXW 6210 N
End Uses: 2K (2 component) Coating, Epoxy Coating, Waterborne Coating
Compatible Polymers & Resins: Epoxies (EP)
Labeling Claims: NMP-free, Tin-free, APEO-free
ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterborne paint systems. This product is recommended for mainly low and medium-viscosity paints, such as gloss and silky gloss emulsions paints, and coatings for parquet floors and furniture on the basis of acrylate and acrylate/polyurethane emulsions.