Products results

Bermocoll EHM 500 is a high efficiency associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll EHM 300 is associative non-ionic, watersoluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll EHM 200 is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

Domemul AA 9670 is a core-shell APEO-free acrylic emulsion designed for industrial waterborne wood coatings, interior and exterior. This resin is recommended for furniture, joinery and decorative application, with no yellowing, good water and blocking resistance, low foaming, good wetting, flow and transparency.Features & BenefitsCoreshell, APEO-free emulsionGood water and blocking resistanceEmulsion for joinery and decorative paintsExcellent wettingGood flowTransparency

Domemul AA 9672 is a core-shell APEO-free acrylic emulsion designed for industrial and decorative waterborne wood coatings, interior and exterior. This resin is specially recommended for DIY and joinery non-yellowing enamels with good water and blocking resistance.Features & BenefitsAcrylic emulsion for decorative and joinery applicationNonyellowingGood water resistanceGood antiblocking resistance

Domemul AA 9673 is a self-crosslinking APEO-free acrylic emulsion designed for industrial and decorative waterborne wood coatings, interior and exterior. This resin is recommended for furniture, joinery, decorative application, with no yellowing, a good alkaline resistance, good wetting, low foaming, fast drying and a very good blocking resistance.Features & BenefitsSelfcroslinking emulsion for decorative and jonery applicatioinGood water and chemical recistance,Very good antiblocking resistanceApeo free, low surfactantNon yellowing

Rovene 403 can be used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. Rovene 403 in portland cement mixtures results in increased adhesion to most substrates, improved water resistance, increased flexural strength and good resistance to UV light. Rovene 403 does not contain antifoam. The addition of an effective antifoam is generally required to avoid a high air content in the hydraulic cementitious mixture. Many antifoam products have been found effective at levels of 2.5% wet on wet by mass.

Domopol 5101 60 SAB/DBE ND is a saturated polyester resin highly suitable as an elastifying component for stoving enamels. This resin is also recommended for coil coating applications such as interior and exterior architecture. The bio-based content is 31% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits31% biobased on solid contentFlexibilizer resinCan and coil coating applications

Domopol 5140 60 SAB/BG ND is a saturated polyester resin developed for coil coating topcoats: interior and exterior architecture. The bio-based content is 18% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features and Benefits :18% biobased on solid contentExterior and interior architecture

Domopol 5178 70 SA/BG is a saturated polyester resin recommended for coil coating applications such as interior and exterior architecture. This resin can be also used for traffic uses and primers for aluminum. The bio-based content is 29% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits29% biobased on solid contentPaints with higher solid contentVery reactive

Domacryl 833 50 D-30 is a physically drying thermoplastic acrylic resin used in a different paint system for exterior protective coatings.Features & BenefitsPhysically drying

Domopol 5130 65 SAB/BG ND is a saturated polyester resin designed for interior and exterior architectural coil coatings. This resin is also suitable for appliance finishing applications. The bio-based content is 24% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features and Benefits :24% biobased on solid contentExterior and interior architecture Appliance finishing applications

Domopol 5157 65 SA/X is a saturated polyester resin designed for coil coatings: top coats with UV - absorption resistance and high durability. The bio-based content is 28% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits28% biobased on solid contentQUV-A stabilityHigh durability coatings

Domopol 5102 50 SAB/SN ND is a saturated polyester resin recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminum primers. This resin is suitable for primers for hot dip galvanized steel. The bio-based content is 14% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits14% biobased on solid contentAppliance finishingAluminum primers

Domopol 5201 55 SA/MPA is a saturated polyester resin developed for can coatings; BPA-NI internal coatings. The bio-based content is 5% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits5% biobased on solid contentBisphenol A non-intentInterior and exterior coatings

Domopol 5155 55 SA/MPA is a saturated polyester resin designed for BPA-NI food contact interior and exterior can coatings. The bio-based content is 6% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits6% biobased on solid contentBisphenol A non-intent coatingsFully complies with FDA regulationsExcellent sterilization and chemical resistance

Tedlar® TWH20BS3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Cimbar BF is a high purity, precipiated natural barium sulfate. Cimbar BF is recommended for use in coatings, especially automotive and industrial primers and topcoats. Additionally, Cimbar BF is often used in high gloss enamels, powder coatings and semi-gloss and gloss latexes.Cimbar BF can be used as a filler in plastics, cosmetics, batteries, and in pharamceutical applications. Cimbar BF is easily dispersable and is often used to impart higher surface gloss, improved hide, improved mar resistance and impact resistance.Cimbar BF also offers excellent sanding resistance, and good scrub resistance to formulations. Cimbar BF is chemically inert and is an excellent choice as a filler in corrosion resistant applications, flame retardant applications, and applications that require excellent weather resistance. Moreover, Cimbar BF exhibits superior thermal stabilty up to 1580 °C. It is therefore recommended for use in heat resistant applications.

Tedlar® TBB15BL3 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

PEL-CAT™ 9666 Most delayed action trimerization catalyst, suitable for CASE Applications. When used as a co-catalyst, improves wet out and flow without significantly extending overall cure time.

Tedlar® TSB15BL3 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Tedlar® TCP10BG3 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Charmax™ FS CB35 is a high quality standard grade of Calcium Borosilicate used in a wide variety of applications.

Tedlar® TPVF-116 PVF POLY is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.

Charmax™ LS AOM-T is a high purity Ammonium Octamolybdate of fine particle size which we have surface treated to improve dispersion, increase the compatibility in PVC/CPVC, and enhance hydrophobicity.

FPC 9230 is Oxidized PAN fiber, in a discontinuous chopped fiber form. The OPAN fiber is rated at >45 LOI, is an excellent fire retardant textile fiber with effective heat blocking and fire barrier properties. These fibers are ideal for economical processing into fire retardant nonwoven fabrics and felts for furniture upholstery, carpet underlayment, high temperature furnace insulation, and other related applications without the addition of harmful chemicals. OPAN fibers can be considered for replacement of meta-aramid fiber based insulations for improved properties. FPC 9230 does not burn, melt or drip, instead the fibers char and will self-extinguish. FPC 9230 is also an effective acoustical insulation fiber.

Tedlar® 68080 is a liquid that can be applied to Tedlar® PVF film before lamination to facilitate the bonding of products for both interior and exterior applications. It is commonly used in the lamination of vinyl wall coverings, architectural siding, awnings, flexible sign faces, and fabric structures.

Tedlar® 68070 offers superior durability, resisting light, moisture degradation, and discoloration. It has been used on a wide variety of substrates and under various conditions over many years of service. Tedlar® 68070 is suitable for architectural applications such as wallcoverings, residential and commercial roofing, siding, trim, accents, and formed or flat metal building panels.

PEL-CAT™ 9749-A Stongly promotes the blowing (urea) reaction early in the foaming process. Provides early foam flow to improve fill prior to significant viscosity build, shortens time to trimerization onset in high water formulations.

Ecronova 6607 is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance. These properties make Ecronova 6607 a practical multi-purpose option for gloss and matte, interior and exterior paints.

Tedlar® TWH15BL3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.