Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Building & Construction
Building Envelope
Other Building Envelope Applications
Products results
245 Products found
Suppliers
Product Families
Functions
End Uses
Features
Chemical Family
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
SDS
With SDS
TDS
With TDS
NEI Corporation
NANOMYTE® SR-500EC
Applications:
Other Building Envelope & Roofing Applications, Electronics Coatings, Glass Coatings
Product Families:
Protective Coatings, Paints & Coatings
Chemical Family:
Acetates
NANOMYTE® SR-500EC is a transparent coating designed to provide easy-to-clean surfaces. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC is a single component product that is easily applied by dip, spray or brush techniques. The coating can be cured at room temperature.
FIBERTEC INC.
MICROGLASS 7216
Applications:
Shingles & Tiles, Other Building Envelope & Roofing Applications, Glazing & Window Elements
Product Families:
Glass Fiber, Reinforcements
Chemical Family:
Glass Beads & Fibers
End Uses:
Tanks
Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.
FIBERTEC INC.
MICA 20S
Applications:
Shingles & Tiles, Other Building Envelope & Roofing Applications, Glazing & Window Elements
Product Families:
Natural Materials, Reinforcements
Chemical Family:
Aluminum Compounds
End Uses:
Tanks
Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.
FIBERTEC INC.
MICA 20E
Applications:
Shingles & Tiles, Other Building Envelope & Roofing Applications, Glazing & Window Elements
Product Families:
Natural Materials, Reinforcements
Chemical Family:
Aluminum Compounds
End Uses:
Tanks
Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.
FIBERTEC INC.
MICA 20U
Applications:
Shingles & Tiles, Other Building Envelope & Roofing Applications, Glazing & Window Elements
Product Families:
Natural Materials, Reinforcements
Chemical Family:
Aluminum Compounds
End Uses:
Tanks
Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.
NEI Corporation
NANOMYTE® SR-500EC-UVP
Applications:
Other Building Envelope & Roofing Applications, Glass Coatings, Other Industrial Coatings
Product Families:
Protective Coatings, Paints & Coatings
Chemical Family:
Acetates
NANOMYTE® SR-500EC-UVP is a transparent coating designed to provide easy-to-clean surfaces with excellent weatherability and UV protection for underlying substrates. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC-UVP is a single component product that is easily applied by dip, spray or brush techniques and cured at room temperature.
Romira
LURANYL® HT 190
Density:
1050.0 - 1050.0 kg/m³
LURANYL® HT 190 is a PPE/PA, injection molding grade, high heat resistance, black.
Deuteron
Deuteron OG 8614
Functions:
Surface Modifier
Chemical Family:
Urea & Urea Derivatives
Features:
Improved Slip, Good Color Fastness, Weather Resistance
Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8614 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8614 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8614 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back
ACP Composites
Lantor Soric® LRC 2
Functions:
Core Material
Core Type:
Other Core Types
Compatible Polymers & Resins:
Phenolic Resins, Epoxies (EP), Vinyl Esters, Polyesters
Lantor Soric® LRC 2 is a flexible, low resin consumption honeycomb foam mat used to add structure and thickness to composite laminates. It absorbs approximately 20% less resin compared to the “Lantor Soric XF” 2MM Aero Mat resulting in a lighter finished product. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one.
Lantor Composites
Soric® XF 4
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Soric® XF 4 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.
Lantor Composites
Soric® XF 10
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Soric® XF 10 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.
Lantor Composites
Soric® LRC 2
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.
Armacell
ArmaPET™ Struct FR150
Functions:
Core Material
Core Type:
Thermoplastic Foam
Chemical Family:
Polyethylene Terephthalate (PET)
ArmaPET™ Struct FR150 is self-extinguishing version of ArmaPET Struct, we offer a structural foam core designed for applications with particularly stringent fire protection requirements.
Romira
ROTEC® ABS HF 4
Polymer Name:
Acrylonitrile Butadiene Styrene (ABS)
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding, Extrusion
ROTEC® ABS HF 4 is ABS, injection molding grade, easy-flowing.
Lantor Composites
Teccore® TG180HP
Functions:
Core Material
Chemical Family:
Polyethylene Terephthalate (PET)
Core Type:
Thermoplastic Honeycomb
Teccore® TG180HP creates additional stiffness in advanced composite panels at lower weight and cost. A panel density of 0.9 g/cm2 can be achieved. By replacing carbon (prepreg) content, Lantor Teccore reduces the environmental impact of carbon composites up to 40% CO2 eq. emission and energy used. Teccore has a nonwoven base made from recycled bottles and resin bonded microspheres to build up low weight volume. Lantor Teccore helps to reduce the fiber print in composite parts and makes painting much easier.
MICAM
MICAM EM42
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Composite Cladding
MICAM EM42 is a limited fire hazard laminate which is a glass-fiber reinforced epoxy resin composite material. It is produced by a high temperature and high pressure process which produces a high strength void-free laminate suitable for a range of applications including electrical insulation and building construction applications.
Lifocolor
Lifocolor WHITE 70 PP
Chemical Name:
Titanium dioxide
Pigment Type:
Inorganic Pigments
Functions:
Pigment
CI Number:
77891
Color:
White
Lifocolor WHITE 70 PP is based on various carrier polymers, which facilitate the qualified white coloring of a variety of engineering polymers and standard types. These products are available from stock; products not in our standard assortment are available upon request. Lifocolor's range also has white masterbatches with low and no titanium Oxide content for common standard types and engineering polymers. The incredible coloristic characteristics of TiO2), are generally not completely achieved and must be compensated with a higher dosage. The use of compostable polymers is becoming ever more important for this reason. Our Lifocolor assortment includes an Increasing selection Of white masterbatches based on biodegradable polymers and bio-based carrier systems made of renewable resources that also meet the requirements for composability under EN 13432.
Procotex
Procotex CF-MLD250
Reinforcement Material:
Carbon Fibers
Reinforcement Form:
Milled Fiber
Procotex CF-MLD250 is a mixture of all origin carbon and graphite ex-PAN fibers, obtained from pure carbon fibers, selected and milled for compounding. Its sizing, wich can vary is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints..; its compatibility needs to be checked on each new batch and for each new application.
European Plastic Joint Stock Company
European Plastic Joint Stock Company PP Filler Masterbatch
Chemical Family:
Carbonates, Calcium Salts
Functions:
Filler
Processing Methods:
Film Extrusion, Extrusion, Blown Film Extrusion, Blow Molding, Injection Molding
Carrier:
Resin-based, Polypropylenes (PP)
Features:
Durable, Excellent Whiteness, Heat Resistance, Excellent Compatibility, Good Dispersion
Synonyms:
CaCO3
European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.
Lantor Composites
Soric® SF 2
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.
Procotex
Procotex CF.LS-MLD150
Reinforcement Material:
Carbon Fibers
Reinforcement Form:
Milled Fiber
Procotex CF.LS-MLD150 is a mixture of all origin carbon and graphite ex-PAN fibers,obtained from pure carbon fibers, selected and milled for compounding. Its very low sizing level, which can vary, is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.
Lantor Composites
Coremat® XM 4
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process
Armacell
ArmaPET™ Eco95
Functions:
Core Material
Core Type:
Thermoplastic Foam
Chemical Family:
Polyethylene Terephthalate (PET)
ArmaPET™ Eco95 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.
Depestele
LINCORE® PLA FF P2 40 400
Applications:
Other Parts & Components, Other Building Envelope & Roofing Applications, Other Building Materials
Product Families:
Polyesters & Copolyesters, Biodegradable Polymers, Engineering & Specialty Polymers
Chemical Family:
Polylactic Acid (PLA), Polyesters
Polymer Name:
Polylactic Acid (PLA)
End Uses:
Automotive Interior Parts, Automotive Exterior Parts, Sporting Goods
LINCORE® PLA FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PLA filaments). Consolidation is done by heating above melting temperature of PLA matric (170°C-200°C) and applying a low pressure (1-30 bars), before a cooling step under pressure.The molding can be realized by diaphragm (1 to 8 bars)- Thermo compression (10 to 200 bars) - Sandwich thermo compression (1 to 5 bars).
Romira
ROTEC® ABS 1001 F
Polymer Name:
Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:
Injection Molding
ROTEC® ABS 1001 F is ABS, injection molding grade, easy-flowing.
Biomer
Biomer HT S93
Applications:
Building Materials, Flooring & Surfaces, Printing & Inks
Product Families:
Thermoplastic Elastomers, Thermoplastic Urethanes (TPU)
Chemical Family:
Thermoplastic Polyurethanes (TPU), Polyurethanes (PU)
Owens Corning
Owens Corning 495
Applications:
Other Building Envelope & Roofing Applications, EIFS & Insulation, Equipment & Parts
Product Families:
Glass Fiber, Reinforcements
Chemical Family:
Glass Beads & Fibers
End Uses:
Pipe Reinforcement, Tanks
Owens Corning 495 multi-end roving represents a compelling solution for enhancing reinforcement when highly demanding mechanical performance are required, especially in pipe applications. 495 product is made from Advantex® glass strands. It is compatible with unsaturated polyester and vinyl ester resins.
Xiamen LFT composite plastic
LFT-G® PP-NA-LGF20
Polymer Name:
Polypropylene (unspecified)
Chemical Family:
Polypropylenes (PP), Polyolefins
Reinforcement Material:
Glass Fibers
Processing Methods:
Injection Molding
LFT-G® PP-NA-LGF20 is a PP (Polypropylene) Resin with Long glass fiber type with 20% fiber Content in Natural color, and and custom colors.
Depestele
LINCORE® FF UD 250
Applications:
Other Building Envelope & Roofing Applications, Other Building & Construction Applications, Renewable Energy
Product Families:
Natural Materials, Reinforcements
LINCORE® FF UD 250 is a 100% flax fabric made of untwisted rovings.The molding can be realized by Infusion, Resin Transfer Molding, Resin Film Infusion Lay upThese fabrics are also availble as resin-impregnated reinforcements for high strength, toughness ans structural performance at low weight.
Lantor Composites
Soric® TF 2
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.
Lantor Composites
Teccore® TG90
Functions:
Core Material
Chemical Family:
Polyethylene Terephthalate (PET)
Core Type:
Thermoplastic Honeycomb
Teccore® TG90 creates additional stiffness in advanced composite panels at lower weight and cost. A panel density of 0.9 g/cm2 can be achieved. By replacing carbon (prepreg) content, Lantor Teccore reduces the environmental impact of carbon composites up to 40% CO2 eq. emission and energy used. Teccore has a nonwoven base made from recycled bottles and resin bonded microspheres to build up low weight volume. Lantor Teccore helps to reduce the fiber print in composite parts and makes painting much easier.
Lantor Composites
Coremat® Xi 1
Functions:
Core Material
Chemical Family:
Polyesters
Core Type:
Thermoplastic Honeycomb
Compatible Polymers & Resins:
Epoxies (EP), Phenolic Resins, Polyesters, Vinyl Esters
Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process
Polychim Industrie (Beaulieu International Group)
Polychim Industrie (Beaulieu International Group) HS15XC Polypropylene Homopolymer
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Injection Molding
Melt Flow Index:
67.5 - 82.5 g/10 min
APCM
APCM DA 4080
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing, Vacuum Bagging
End Uses:
Tanks
APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.
Romira
ROMILOY® 5240 GF30
Polymer Name:
PBT/ASA Alloy
Processing Methods:
Injection Molding
ROMILOY® 5240 GF30 is PBT/ASA, injection molding grade, 30% glass fiber reinforced, high dimensional stability, high surface quality.
Romira
ROMILOY® 2720
Polymer Name:
PC/PET Alloy
Processing Methods:
Injection Molding
Density:
1220.0 - 1220.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
ROMILOY® 2720 is PC/PET, injection molding grade, easy-flowing, impact-resistant, high heat resistance.
Show
36
of 245 results
Go to page
1
2
3
4
5
6
7