Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Building & Construction
Building Materials
Pipes & Plumbing
Products results
4,823 Products found
Suppliers
Product Families
Functions
End Uses
Features
Polymer Name
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Your ChemCo
RTU Foam B
Foam Type:
Open Cell Foam
Chemical Family:
Polyurethanes (PU)
End Uses:
Door Frames, Pipes, Window Frames, Air Conditioner Filters, Electrical Components
Your ChemCo
Composite Materials Surface Finish A
Functions:
Surface Finish
Color:
White, Off White
Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.
Your ChemCo
DiTech Nucleating Agent
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polypropylenes (PP), Polyolefins
Features:
High Performance, Good Impact Strength, High Porosity
End Uses:
Batteries, Battery Separator, Industrial Tanks, Automotive Bumpers, Pipes, Appliances
DiTech Nucleating Agent is a high-performance I-type nucleator tor polyolefin. It can improve the impact strength and porosity of PP materials. This product is suitable for household appliances, PPR pipes, automobile bumpers, accumulator tanks, batteries, micropore PP fibers, ventilated packaging membranes, lithium battery diaphragms, etc.
Your ChemCo
Basic ThermoPlastic Resin A
Polymer Name:
Polyvinyl Chloride (PVC)
Processing Methods:
Injection Molding, Injection Blow Molding, Calendering, Extrusion
End Uses:
Medical/Healthcare Applications, Rigid Films, Stationary Supplies, Medical Packaging, Furniture, Consumer Applications, Construction Applications, Credit/Smart Cards, Laminates, Fittings, Flexible Packaging, Pipes, Film
Basic Thermoplastic Resin A is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering and injection blow molding of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, foam core pipes and pipe fittings, injection moldings, including housing, and bottles.
Your ChemCo
Thermoplastic Silicone Vulcanizate
Polymer Name:
Thermoplastic Vulcanizate (TPV)
Processing Methods:
Extrusion, Injection Molding
Your ChemCo
Basic ThermoPlastic Resin D
Polymer Name:
High Density Polyethylene (HDPE)
Labeling Claims:
Low Carbon Footprint (PCF), Contains PCR Resin, Recycled, Bio-based
Processing Methods:
Extrusion, Blow Molding
Basic Thermoplastic Resin D is a High Density Polyethylene copolymer resin containing 50% Post-Consumer Recycled (PCR) HDPE. Its properties are comparable to virgin HDPE resins and has an excellent stress-cracking resistance (ESCR) making it ideal for use in a wide range of blow molding applications.
Your ChemCo
Elastomers Part A
Polymer Name:
Perfluoroelastomer (FFKM)
Physical Form:
Seals
Features:
Low Metal Content, Good Compression Set, Good Mechanical Properties
End Uses:
Pump Parts, Semiconductor Applications
Color:
Black
Elastomers Part A are a black product for photovoltaic wet manufacturing processes requiring a wide range of chemical resistance. Elastomers Part A provides an excellent combination of properties (resistance to acids/bases) and is the product of choice for wet processes as an upgrade from standard elastomers, i.e., FKM, NBR, EPDM, etc. A maximum service temperature of 230°C is suggested.
Your ChemCo
Plastics Parts & Shapes B
Polymer Name:
Ethylene Chlorotrifluoroethylene Copolymer
Physical Form:
Tube, Rods
Features:
Good Thermal Stability, Self Lubricating, Good Weather Stability, Chemical Resistant, Machinable, Low Friction
Plastics Parts & Shapes B is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Exac ECTFE include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant
Your ChemCo
Composite Materials Molding Compound B
Functions:
Molding Compound
Polymer Name:
Phenol Formaldehyde (PF)
Reinforcement Material:
Glass Fibers
Processing Methods:
Injection Molding
End Uses:
Aerospace Applications, Brake Pads, Housings, Cases
Composite Materials Molding Compound B is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. Composite Materials Molding Compound B is available in black.
BTC Europe GmbH
BTC Europe GmbH Sodium Silicate 40/42.
Chemical Name:
Sodium Silicate
CAS Number:
1344-09-8
Functions:
Stabilizer, Anti-Flocculation Agent, Corrosion Inhibitor, Binder
Chemical Family:
Sodium Salts, Silicates
BTC Europe GmbH Sodium Silicate 40/42.is a versatile liquid with sodium silicate as its primary chemical component. This product serves multiple functions, including acting as an anti-flocculation agent, corrosion inhibitor, binder, and stabilizer. Falling under the chemical family of silicates and sodium salts, Sodium Silicate 40/42 is designed for applications in the building and construction and industrial markets. In liquid form, it offers convenience for various uses.
BTC Europe GmbH
Irgastat® P 16
End Uses:
Tubes, Pipes, Profiles, Fittings, Housings, Hoses, Siding Applications
Labeling Claims:
Dust-free
Irgastat® P 16 is a product designed for various applications, including fittings, housings, tubes, pipes, siding, profiles, and hoses. It offers anti-static properties, is dust-free, easy to handle, and delivers high performance. Additionally, it features low migration, low volatility, reduced surface resistivity, and strong dust traceability. This product is available in granule or solid physical forms.
Braskem America
UTEC® 3041
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Ram Extrusion, Compression Molding
Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.
Braskem America
UTEC® 4041
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Ram Extrusion, Compression Molding
Braskem America UTEC® 4041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than high density polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.
Braskem America
SLH118
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Film Extrusion, Extrusion, Cast Film Extrusion, Blown Film Extrusion
Additives Included:
Antioxidant
Melt Flow Index:
1.0 - 1.0 g/10 min
SLH118 is a Linear Low Density Polyethylene developed specifically for blown film extrusion. Films made with this product exhibit a balanced combination of good processing performance, optical and mechanical properties, and sealability. The resin contains very low gel amount and includes oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866.
Braskem America
RPR 5A1 WE Recycled Polyethylene
Polymer Name:
High Density Polyethylene (HDPE)
Labeling Claims:
Low Carbon Footprint (PCF), Contains PCR Resin, Recycled, Sustainable
Processing Methods:
Extrusion, Blow Molding
Density:
955.0 - 955.0 kg/m³
Braskem Recycled PRP 5A1 WE recycled polyethylene is a high-density polyethylene (HDPE) embodying eco-conscious attributes. With labeling claims of being bio-based, containing PCR resin, and having a low carbon footprint (PCF), this polymer emphasizes sustainability. Its notable feature includes excellent environmental stress crack resistance (ESCR). Tailored for containers, small bottles, and blow molding of up to 20 L for chemicals, domestic use, and oils Available in a natural color.
Braskem America
Braskem America TI4003F
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Extrusion, Compounding, Stretch Films Extrusion
Melt Flow Index:
0.3 - 0.3 g/10 min
Braskem TI4003F polypropylene impact copolymer (ICP) provides extra high izod impact, very high flexural modulus and good low temperature drop impact.
Braskem America
Braskem Inspire 114
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Thermoforming, Extrusion, Blow Molding, Compounding, Stretch Films Extrusion, Film Extrusion
Melt Flow Index:
0.5 - 0.5 g/10 min
Braskem Inspire® 114 EU polypropylene impact copolymer is a propylene based resin very suitable for extrusion applications including blown films, sheets, profiles, pipes and blow molded containers. Inspire® 114 EU Performance Polymer has an excellent balance of high stiffness and impact resistance, even at low temperatures. Inspire® 114 EU Performance Polymer combines outstanding mechanical proper es with superior processability due to its high melt strength delivering improved sag properties compared to conventional polypropylenes.
Braskem America
Braskem America HDP0353
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Pipe Extrusion
Melt Flow Index:
0.35 - 0.35 g/10 min
Braskem HDP0353 is a high density polyethylene copolymer (HDPE) developed for corrugated piping. Applications and suggested users include Industrial Standard Compliance ASTM D 3350 and Cell Classification PE 435620A.
Braskem America
SLL118
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion, Cast Film Extrusion, Blown Film Extrusion, Film Extrusion
Melt Flow Index:
1.0 - 1.0 g/10 min
SLL118 is a Linear Low Density Polyethylene, copolymer of butene-1. This product is specifically designed for blown film extrusion in blends with other polyethylenes. The resulting films exhibit excellent processing performance, balanced optical and mechanical properties, and superior sealability. SLL118 boasts a very low gel amount and includes oxidant additives. Notably, this grade contains a minimum biobased carbon content of 87%, as determined according to ASTM D6866.
Braskem America
UTEC® 5540
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Ram Extrusion, Extrusion, Compression Molding
Braskem America UTEC® 5540 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.
Braskem America
SLH218
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Film Extrusion, Coextrusion, Extrusion, Cast Film Extrusion, Blown Film Extrusion
Melt Flow Index:
2.3 - 2.3 g/10 min
SLH218 is a LLDPE Hexene copolymer, expertly crafted by Braskem. This grade delivers an optimal balance of optical properties, mechanical properties (especially stretchability), sealability, and processability. It contains very low gel content, ensuring smooth processing. With a minimum biobased carbon content of 84%, determined according to ASTM D6866, SLH218 upholds sustainable practices while offering versatile performance in various applications.
Braskem America
UTEC® 5541
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Ram Extrusion, Compression Molding
Braskem America UTEC® 5541 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.
Braskem America
UTEC® 3040
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Ram Extrusion, Compression Molding
Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.
Braskem America
UTEC® 4040
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Ram Extrusion, Compression Molding
Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® 4832
Polymer Name:
Thermoplastic Vulcanizate (TPV)
Processing Methods:
Extrusion, Profile Extrusion
Density:
875.0 - 875.0 kg/m³
Espolex® 4832 is a recyclable TPV that combines thermoplastic processing capabilities with rubber-like behavior. It demonstrates excellent processability in extrusion, calendar, and blow molding processes, while also exhibiting low die drool during extrusion. Applications: Automotive interior skin Sheets Tubes Film/skins/foils Hoses Profiles Body seals/weather stripping Features: Low die drool Rubber-like elasticity and feel Benefits: Recyclable Soft touch feeling
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT570
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Extrusion, Injection Molding
Features:
Low Temperature Impact Resistance, Cost Effective, Good Colorability, Low Density, Consistent High Quality, Pigmentable, Light Weight
Density:
880.0 - 880.0 kg/m³
Strain at Break:
400.0 - 400.0 %
Flexural Modulus:
300.0 - 300.0 MPa
Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures. Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts Features: Excellent impact performance at low temperatures well-balanced mechanical property Benefits: Mold-in-Color Recyclable
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® CPD-450
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
High Performance, Good Colorability, Consistent High Quality, Pigmentable, High Elasticity, Light Weight, Flexible
Density:
930.0 - 930.0 kg/m³
Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts Features: Heat Stabilized Black High Melt Flow Benefits: Anti slip Noise reduction
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® 3785A
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
High Performance, Cost Effective, Consistent High Quality, Pigmentable, Flexible, Heat Resistance, Good Colorability, Good Adhesion, Low Density, Good Surface Appearance, High Elasticity, Light Weight
Density:
880.0 - 880.0 kg/m³
Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber. Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts Features: High flowability Rubber-like elasticity and feel Benefits: Recyclable
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® CHN-250 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Fillers Included:
Talc
Melt Flow Index:
25.0 - 25.0 g/10 min
Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding. Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle Features: Good stiffness with impact performance and high Melt flow Benefits: Easy to fill large parts
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® AGM 250 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Melt Flow Index:
20.0 - 20.0 g/10 min
Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle Features: -20 ⁰C Temperature Ductility Good Scratch Resistance Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® 3675A
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
High Performance, Cost Effective, Consistent High Quality, Pigmentable, Flexible, Heat Resistance, Good Colorability, Good Adhesion, Low Density, Good Surface Appearance, High Elasticity, Light Weight
Density:
890.0 - 890.0 kg/m³
Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties. Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts Features: High flowability Rubber-like elasticity and feel Benefits: Recyclable
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® HGZ 1200 Natural
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Injection Molding
Melt Flow Index:
120.0 - 120.0 g/10 min
Noblen® HGZ 1200 Natural is a polypropylene, high crystalline homopolymer with ultra high melt flow, making it great for thin wall molding applications. Applications: Packaging Trim requires excellent balance of flow and stiffness. Features: Which has high surface hardness Good scratch resistance.
Evonik
Dynasylan® 1122
Chemical Family:
Amines
Functions:
Coupling Agent, Crosslinking Agent, Adhesion Promoter, Sizing Agent, Surface Modifier
Applicable Processes:
Abrasives Manufacturing
Compatible Polymers & Resins:
Polyvinyl Butyral (PVB), Melamines & Melamine Formaldehydes (MF), Polyamides, Phenolic Resins, Furans, Epoxies (EP), Polypropylenes (PP), Ethylene Vinyl Acetate (EVA), Polyurethanes (PU), Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC), Polyvinyl Acetate (PVA), Polycarbonates (PC), Polyethylenes (PE)
Dynasylan® 1122 is a secondary aminofunctional ethoxysilane, characterized by two symmetric silicone atoms. It functions as an adhesion promoter between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). In addition to its role as a surface modifier, Dynasylan® 1122 can be employed for the chemical modification of various substances.
Evonik
Dynasylan® 1124
Chemical Family:
Amines
Functions:
Coupling Agent, Crosslinking Agent, Adhesion Promoter, Surface Modifier
Applicable Processes:
Abrasives Manufacturing
Compatible Polymers & Resins:
Polyvinyl Butyral (PVB), Melamines & Melamine Formaldehydes (MF), Polyamides, Phenolic Resins, Furans, Epoxies (EP), Polypropylenes (PP), Ethylene Vinyl Acetate (EVA), Polyurethanes (PU), Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC), Polyvinyl Acetate (PVA), Polycarbonates (PC), Polyethylenes (PE)
Synonyms:
3-(Trimethoxysilyl)-N-[3-(trimethoxysilyl)propyl]-1-propanamine, Bis(trimethoxysilylpropyl)amine, Bis(γ-trimethoxysilylpropyl)amine, Bis[3-(trimethoxysilyl)propyl]amine, N,N-Bis[3-(trimethoxysilyl)propyl]amine
Dynasylan® 1124 is a secondary aminofunctional methoxysilane with symmetric silicon atoms, serves as an adhesion promoter between inorganic materials (like glass, metals, fillers) and organic polymers (thermosets, thermoplastics, elastomers). This versatile compound also functions as a surface modifier and enables chemical substance modification. Available as a colorless to yellow liquid with an amine-like odor, Dynasylan® 1124 readily dissolves in alcohols, aliphatic, or aromatic hydrocarbons.
Evonik
Dynasylan® MEMO
Chemical Name:
3- (Trimethoxysilyl) propyl methacrylate
CAS Number:
2530-85-0
Functions:
Coupling Agent, Monomer, Sizing Agent, Adhesion Promoter, Surface Modifier, Crosslinking Agent
Chemical Family:
Methacrylates
Synonyms:
(3-Methacryloxypropyl)trimethoxysilane, (γ-Methacryloxypropyl)trimethoxysilane, [γ-(Methacryloyloxy)propyl]trimethoxysilane, 2-Methyl-2-propenoic acid 3-(trimethoxysilyl)propyl ester, 3-(Methylacryloxy)propyltrimethoxysilane, 3-(Trimethoxysilyl)propyl methacrylate, 3-(Trimethyoxysilyl)propyl methacrylate, 3-Methacryloxypropyltrimethoxisilane, 3-Methacryloyloxypropyltrimethoxysilane, 3-Trimethoxysilylpropyl 2-methylprop-2-enoate, Methacryloyloxypropyltrimethoxysilane, NSC 93591, Trimethoxy(3-methacryloxypropyl)silane, Trimethoxy(3-methacryloyloxypropyl)silane, γ-Methacryloxy propyl trimethoxyl silane
Dynasylan® MEMO is a revolutionary solution for enhancing polymer and resin performance. As a versatile surface modifier and coupling agent, it excels in various applications. This product boasts exceptional chemical resistance, improving filler dispersion and mechanical properties in plastics and elastomers. With features like acid and alkali resistance, low viscosity, and good wet adhesion strength, Dynasylan® MEMO transforms materials into high-performance wonders. Experience its benefits in cables, pipes, and more.
Evonik
Dynasylan® 1505
Functions:
Adhesion Promoter, Impact Modifier, Surface Modifier, Coupling Agent, Crosslinking Agent
Applicable Processes:
Abrasives Manufacturing
Compatible Polymers & Resins:
Melamines & Melamine Formaldehydes (MF), Phenolic Resins, Furans
Synonyms:
(3-Aminopropyl)diethoxymethylsilane, (3-Aminopropyl)methyldiethoxysilane, (Aminopropyl)methyldiethoxysilane, 3-(Diethoxymethylsilanyl)propylamine, 3-(Diethoxymethylsilyl)-1-propanamine, 3-(Diethoxymethylsilyl)propan-1-amine, 3-(Diethoxymethylsilyl)propylamine, γ-Aminopropylmethyldiethoxysilane, γ-Diethoxymethylsilylpropylamine
Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. This liquid product finds its use in coatings, primers, and industrial additives like foundry resins. Compatible with glass and metal substrates, it's your go-to for various applications, from abrasives manufacturing to pipes and cables. Elevate your materials with Dynasylan® 1505.
Show
36
of 4,823 results
Go to page
1
2
3
4
5
6
7
8
9
10