Wall Panels

659 products found for Wall Panels in Building & Construction
United Initiators Mypc product card banner

United Initiators

United Initiators MYPC

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Initiators, Promotors & Catalysts

Chemical Family: Peroxides, Carbonates

White, greasy flakes, consisting of technically pure Dimyristylperoxydicarbonate. This long-chained aliphatic peroxydicarbonate is used as an initiator (radical source) in the polymerisation of monomers, e.g. vinylchloride.

Norsodyne® C 55377 Al product card banner

Polynt Group

NORSODYNE® C 55377 AL

Brand: NORSODYNE

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

Polycor® Iso Br White 9199 product card banner

Polynt Group

POLYCOR® ISO BR WHITE 9199

Brand: POLYCOR

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Gelcoats & Topcoats

Chemical Family: Isophthalics

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Enydyne® H 68377 Tae product card banner

Polynt Group

ENYDYNE® H 68377 TAE

Brand: ENYDYNE

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Norsodyne® 2834 product card banner

Polynt Group

NORSODYNE® 2834

Brand: NORSODYNE

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

NORSODYNE 2834 - Thixotropic,promoted and non-waxed,good chemical resistance,food grade,Lloyd's approved. Main Applications areas are Automotive,Building and Construction,Industrial sector,Marine etc.

Armorflex® 953 product card banner

Polynt Group

ARMORFLEX® 953

Brand: ARMORFLEX

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Gelcoats & Topcoats

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Lg™ Pvc Lp170 product card banner

LG Chem

LG™ PVC LP170

Brand: LG

Applications: Wall Panels, Other Flooring & Surface Applications

Product Families: Vinyl Polymers

Chemical Family: Vinyls, Vinylics & Vinyl Derivatives, Epoxy & Epoxy Derivatives

Polymer Name: Polyvinyl Chloride (PVC)

End Uses: Wall Panels, Flooring

LP170, homopolymer made from micro-suspension polymerization, is a medium-viscosity PVC resin with a pseudo plastic flow property in processing range.LP170 can be used for synthetic leather foam layer made by knife coating, roll coating and gravure coating especially. Products made from LP170 are excellent in restoring force and print ability.

Polynt Group Hup 16/23 Rb-7035-v product card banner

Polynt Group

Polynt Group HUP 16/23 RB-7035-V

Applications: Printed Circuit Boards (PCBs), Housings & Enclosures, Anode Materials

Product Families: Sheet Molding Compounds (SMC)

HUP 16/23 RB-7035-V is generally used in Building and Construction,Electronic and Electrical applications.

Biresin® Cr131 product card banner

Sika

Biresin® CR131

Brand: Biresin

Applications: Technical Fabrics, Renewable Energy, Power & Utilities

Product Families: Thermoset Resins

Chemical Family: Epoxy & Epoxy Derivatives

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fibre reinforced composites parts and moulds with thermal properties up to 130°C.

Crystic® Vinyl Ester Resin Ve679-03pa product card banner

Scott Bader

Crystic® Vinyl Ester Resin VE679-03PA

Brand: Crystic

Applications: Rail & Mass Transit, Marine, Powertrain & UTH

Product Families: Thermoset Resins

Chemical Family: Vinyl Esters

Crystic® Resin VE679-03PA is a pre-accelerated, DCPD modified, vinylester resin, developed for use as an infusion resin with a wide range of gel times dependant on catalyst type and level.

Gurit Cr 3400 product card banner

Gurit

Gurit CR 3400

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Gelcoats & Topcoats

Chemical Family: Epoxy & Epoxy Derivatives

CR 3400 is an in-mould epoxy surfacing system for epoxy laminates, and is designed to be used as the base for the subsequent application of a paint scheme. CR 3400 is therefore formulated to be easily sandable so that once released, the CR 3400 surface can be readily keyed prior to the application of the paint system. This feature gives additional benefits in that any minor surface defects caused by laminate print-through or mould imperfections can easily be sanded away. CR 3400 is applied into a mould in the same way as other epoxy gelcoats, and has similar handling characteristics. However, the product has a considerably longer overcoating window than other gelcoats - up to one day with Standard Hardener at 20°C. This means that the system can also be used in a very flexible manufacturing environment. CR 3400 is designed to be backed up with Ampreg 3X epoxy laminating systems. Under certain conditions it may also be used in conjunction with SE70, SE84 prepregs, ST70 and ST 95 SPRINT systems

Biowet™ 150R product card banner

ADDAPT Chemicals BV

BioWet™ 150R

Brand: BioWet

Applications: Label & Tape Adhesives, Other Tapes, Labels & Graphics Applications, Primers & Lacquers

Product Families: Dispersing & Wetting Additives

Chemical Family: Amides, Amides & Polyamides

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

Distitron® 629 S product card banner

Polynt Group

DISTITRON® 629 S

Brand: DISTITRON

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Thermoset Resins

Chemical Family: Acrylics, Acrylates & Methacrylates

DISTITRON® 629 S - Unsaturated polyester resin in styrene,special. It is used to produce furnitures and sanitary through casting,to be used with trihydrate of alumina method.

Epovia Optimum® Krf 1001 Tas product card banner

Polynt Group

EPOVIA OPTIMUM® KRF 1001 TAS

Brand: EPOVIA OPTIMUM

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

Tosaf Inc. Light Diffuser Ld5825pc product card banner

TOSAF Inc.

TOSAF Inc. Light Diffuser LD5825PC

Applications: Glazing & Window Elements, Wall Panels, Other Electrical & Electronics Applications

Product Families: Processing Aids, Additive Masterbatches

End Uses: Film, Profiles

Light Diffuser LD5825PC to deliver the ultimate combination of high thermal stability and high light diffusion properties.

Crystic® Fire Retardant Resin U 1131Tpa product card banner

Scott Bader

Crystic® Fire Retardant Resin U 1131TPA

Brand: Crystic

Applications: Powertrain & UTH, Interior, Exterior & Body

Product Families: Thermoset Resins

Chemical Family: Unsaturated Polyester (UPE)

Polymer Name: Thermoset Polyester

Crystic Resin U 1131TPA is a halogen free, filled, orthophthalic, non accelerated, low styrene content and thixotropic resin. If a gelcoated finish is required, use with Crystic Fireguard Gelcoat 72PA and achieve M2 to the French standard and S4 SR2 ST2 to DIN 5510. Please contact us for details about other fire approvals.

Biresin® Cr144 product card banner

Sika

Biresin® CR144

Brand: Biresin

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Epoxy & Epoxy Derivatives

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Nofia Ol3001 product card banner

FRX Polymers

Nofia OL3001

Brand: Nofia

Applications: Adhesives, Wall Panels, Other Coatings & Finishes

Product Families: Flame Retardants

End Uses: Windows & Doors, Printed Circuit Boards, Consumer Applications

Nofia OL1001 and Nofia OL3001 are oligomeric, reactive flame retardants (FRs). The oligomers are phosphorus-based additives with phenolic hydroxyl end groups suitable for flame retarding thermoset resins such as unsaturated polyesters, epoxies, and polyurethanes. The oligomers are highly soluble in the typical solvents used in thermoset resin processing and enable production of transparent FR thermoset resins..

Biresin® Cr201 product card banner

Sika

Biresin® CR201

Brand: Biresin

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Epoxy & Epoxy Derivatives

Biresin® CR201 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites with outstanding heat resistance.

Last-a-foam® R-9340 Hp product card banner

General Plastics

LAST-A-FOAM® R-9340 HP

Brand: LAST-A-FOAM

Applications: Housings & Enclosures, Renewable Energy, Roof Shingles & Tiles

Product Families: Foam Cores

Chemical Family: Polyurethanes (PU)

End Uses: Insulators

The R-9300 Continuous Insulation Block Series is a high-density rigid cellular polyurethane block designed to support structural loads while insulating buildings. Cellular polyurethane is a natural insulator and formulated in these high-density blocks, it provides the strength to support large compressive loads with little deflection. At the same time, it offers economical, code-required continuous insulation that reduces loads on cooling equipment for lower energy costs.

Icl Group Fr-1410 product card banner

ICL Group

ICL Group FR-1410

Applications: Other Wire & Cable Applications, Jacketing & Insulation, Building Wires & Power Cables

Product Families: Performance Additives, Flame Retardants

Chemical Family: Halogenated Compounds, Brominated Compounds

ICL Flame Retardant FR-1410 is decabromodiphenyl ethane flame retardant. Suitable for use in HIPS, PE, PP, PBT, UPE, Epoxy, Nylon, and UPE,, including in construction and electronics applications. FR-1410 exhibits excellent FR efficiency, exceptional thermal stability. Multipurpose flame retardant.

Polycor® Iso Br product card banner

Polynt Group

POLYCOR® ISO BR

Brand: POLYCOR

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Gelcoats & Topcoats

Chemical Family: Isophthalics

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

Armorcote® Sp product card banner

Polynt Group

ARMORCOTE® SP

Brand: ARMORCOTE

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Gelcoats & Topcoats

Chemical Family: Other Chemical Families

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

Norsodyne® H 84233 L product card banner

Polynt Group

NORSODYNE® H 84233 L

Brand: NORSODYNE

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Distitron® 5119 Esx20q product card banner

Polynt Group

DISTITRON® 5119 ESX20Q

Brand: DISTITRON

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

DISTITRON® 5119 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Norsodyne® T 16372 product card banner

Polynt Group

NORSODYNE® T 16372

Brand: NORSODYNE

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

Distitron® 458 En2 product card banner

Polynt Group

DISTITRON® 458 EN2

Brand: DISTITRON

Applications: Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

DISTITRON® 458 EN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

Norsodyne® O 12335 Al product card banner

Polynt Group

NORSODYNE® O 12335 AL

Brand: NORSODYNE

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

Synolite™ 1967-G-1 product card banner

Aliancys

Synolite™ 1967-G-1

Brand: Synolite

Applications: Marine, Pavement, Highways, Roads & Bridges, Parking Structures & Stadiums

Product Families: Thermoset Resins

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

Norox® 400 product card banner

United Initiators

NOROX® 400

Brand: NOROX

Applications: Housings & Enclosures, Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges

Product Families: Initiators, Promotors & Catalysts

Chemical Family: Peroxides, Carbonates

Colourless, mobile liquid, consisting of technically pure tert.butylperoxy-(2- ethyl-hexyl) carbonate. This thermally stable mono-perester of the carbonic acid is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: hot press moulding of SMC or BMC at 130- 160°C.

Norox® 802-75-Al3 product card banner

United Initiators

NOROX® 802-75-AL3

Brand: NOROX

Applications: Housings & Enclosures, Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges

Product Families: Initiators, Promotors & Catalysts

Chemical Family: Peroxides

Colorless, mobile liquid, consisting of a peroxide mixture based on 1,1-bis(tertbutylperoxy)-3,3,5-trimethyl cyclohexane, de-sensitized with aliphatic hydrocarbons. This product is used as an initiator (radical source) in the curing of unsaturated polyester resins at above 80°C. Main application: hot press molding of SMC or BMC at 120°C.

Corelite® Pet 110 product card banner

CoreLite

CoreLite® PET 110

Brand: CoreLite

Applications: Pavement, Highways, Roads & Bridges, Wall Panels, Rail & Mass Transit

Product Families: Foam Cores

Chemical Family: Polyethylene Terephthalate (PET)

End Uses: Wind Turbine Blades, Roof Panels, Nacelles

CoreLite® PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite® PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

Zoltek™ Px35 Ud200 product card banner

Zoltek

ZOLTEK™ PX35 UD200

Brand: ZOLTEK

Applications: Technical Fabrics, Power & Utilities, Body Armor

Product Families: Carbon Fiber

Chemical Family: Carbon Fiber

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Deuteron Og 8674 product card banner

Deuteron

Deuteron OG 8674

Brand: Deuteron

Applications: Wood Coatings & Finishes, Primers & Lacquers, Other Paints & Coatings Applications

Product Families: Other Resins & Binders, Surface Modifiers

Chemical Family: Urea & Urea Derivatives

Deuteron OG 8674 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8674 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8674 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8674 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

United Initiators Tmch-ha-m1 product card banner

United Initiators

United Initiators TMCH-HA-M1

Applications: Housings & Enclosures, Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges

Product Families: Initiators, Promotors & Catalysts

Chemical Family: Peroxides

Colourless, mobile liquid, consisting of a peroxide mixture based on 1,1- bis(tert.butylperoxy)3,3,5-trimethyl cyclohexane, desensitised with aliphatic hydrocarbons. This product is used as an initiator (radical source) in the curing of unsaturated polyester resins at above 80°C. Main application: hot press moulding of SMC or BMC at 120°C.

Curox® I-300 product card banner

United Initiators

CUROX® I-300

Brand: CUROX

Applications: Refining & Gas Processing, Roof Shingles & Tiles, Pavement, Highways, Roads & Bridges

Product Families: Initiators, Promotors & Catalysts

Chemical Family: Peroxides

Colourless, mobile liquid, consisting of peroxides based on methyl isobutyl ketone, de-sensitised with aliphatic hydrocarbons. This ketone peroxide is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: curing of large moulded parts at elevated temperatures (60-120°C).