Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Building & Construction
Flooring & Surfaces
Ceiling Tiles
Products results
78 Products found
Suppliers
Product Families
Functions
Chemical Family
Features
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Your Distributor
SILRES® BS 1802
Chemical Family:
Siloxanes, Silanes
Product Type:
Concrete Admixture, Solventless & High Solids Coating, Sealer
Application Area:
Facade
Compatible Substrates & Surfaces:
Concrete, Wood
SILRES® BS 1802 is used in undiluted form as an admixture for the integral waterproofing of fresh concrete. Moreover SILRES® BS 1802 can be used as water resisting admixture for non-load bearing manufactured concrete products.
Your Distributor
SILRES® BS 3003
Chemical Family:
Silanes, Siloxanes
Functions:
Binder & Resin
Product Type:
Waterborne Coating, Primer
Application Area:
Facade
Application Method:
Brush, Spray, Roller
Compatible Substrates & Surfaces:
Brick, Wood, Concrete, Stone, Ceramic, Sandstone
SILRES® BS 3003 is a water-thinnable, solventless emulsion, based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 3003 serve as highquality, general-purpose water repellents for impregnating and priming mineral surfaces. Moreover SILRES® BS 3003 can be used for the mass treatment of non-load bearing concrete products.
Your Distributor
SILRES® BS Creme C
Product Type:
Solventless & High Solids Coating, Waterborne Coating
Features:
Good Weather Stability, Consistent High Quality, Low Water Absorption, High Durability, Water Resistant, Low Volatility, Freeze/Thaw Stability, Good Aesthetics, Salt Resistance, High Capacity of Penetration, Excellent Compatibility, Breathable, Good Adhesion, Temperature Resistance, Water-based, Excellent Hydrophobic Properties, UV Resistant, Excellent Water Repellency , Good Barrier Properties, Alkali Resistant, Thixotropic
Application Area:
Facade
Compatible Substrates & Surfaces:
Concrete, Wood
Chemical Family:
Silanes
SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a highquality specialty product for impregnating both normal and reinforced concrete.
H.B. Fuller
TEC® Fast Set 3N1® Performance Mortar 517
Product Type:
Mortar
Application Area:
Pavements, Masonry, Tile, Quarry Tiles, Gypsum Wallboard, Ceramic Tiles
Features:
Non-slump, Good Smoothness, Improved Workability, Fast Cure, Low VOC, Good Sagging Resistance, Non-Porous
Application Method:
Trowel
TEC® Fast Set 3N1® Performance Mortar TA-517 introduces an exclusive nanotechnology formula, ingeniously blended with microspheres and ZS-100 patented bonding technology. This extraordinary combination results in a mortar that offers three essential functionalities simultaneously: latex modification, medium bed, and non-sag, all without compromising performance in any installation scenario. Experience the epitome of efficiency and quality with TEC® Fast Set 3N1® Performance Mortar as you streamline your diverse installation needs.
H.B. Fuller
TEC® Feather Edge Skim Coat TA-330
Product Type:
Adhesive, Skim Coat
Application Area:
Quarry Tiles, Floor, Brick
Compatible Substrates & Surfaces:
Terrazzo, Gypsum, Cement Backer Board, Brick, Plywood, Concrete, Tile
Features:
Good Smoothness, Multi-Substrate Compatibility, Good Bonding Strength, Fast Setting, Excellent Performance, Self-Drying
TEC® Feather Edge Skim Coat TA-330 is a premium cement-based compound expertly designed to effortlessly smooth and level irregularities, ranging from featheredge up to 1/2" (12 mm). With its rapid setting properties, it allows for the swift installation of various floor coverings in just 15–20 minutes, all while delivering exceptional performance. Notably, TEC® Feather Edge boasts superior bond strength, minimizing the need for priming in most applications.
H.B. Fuller
TEC® TotalFlex® 150 Universal Polymer-Modified Mortar TA-459
Product Type:
Mortar
Application Area:
Tile, Wall, Mosaic Tile, Ceilings, Sheet Goods, Facade, Floor, Ceramic Tiles
Features:
Freeze/Thaw Stability, High Coverage, Long Open Time, Good Sagging Resistance, Non-slump, Good Smoothness
Application Method:
Trowel
TEC® TotalFlex® 150 Universal Polymer-Modified Mortar TA-459 is a superior solution, blending high performance and polymer modification. Meeting the A118.15HTE standard, it offers an exceptionally extended open time and an incredibly smooth and creamy troweling experience. This versatile mortar excels in various applications, accommodating large and heavy tiles, standard and mosaic tiles, gaged porcelain panels, and uncoupling membranes. TotalFlex 150 ensures robust adhesion, resisting sagging or slumping on floors, walls, and ceilings.
H.B. Fuller
TEC® HydraFlex™ Waterproofing Crack Isolation Membrane 316
Product Type:
Crack Isolation Membrane
Application Area:
Wall, Ceilings, Floor
Application Method:
Roller, Trowel, Spray
Features:
Flexible, Mildew Resistant, Mold Resistance, Good Smoothness, Fast Setting, Waterproofing, Low VOC, Fast Drying
TEC® HydraFlex™ Waterproofing Crack Isolation Membrane TA-316 is a versatile solution designed for both interior and exterior applications. This ready-to-use membrane is flexible, resistant to mold and mildew, and effectively waterproofs while providing crack isolation. It creates a seamless and watertight surface over walls, floors, and ceilings. The HydraFlex Membrane efficiently prevents in-plane cracks up to 1/8" (3 mm) or up to 1/4" (6 mm) wide from transmitting through to ceramic and stone tile, ensuring a smooth finish. Suitable for a wide range of applications, from residential to heavy commercial, this membrane guarantees enhanced protection and durability.
H.B. Fuller
Paranol® VA-935
Functions:
Binder & Resin, Binder
Chemical Family:
Vinyl Acetate-Acrylate Copolymer
Features:
High Tensile Strength, High Dust Control
Paranol® VA-935 is a surfactant-stabilized vinyl acetate-acrylic copolymer. It exhibits high tensile strength and serves as an excellent pigment binder. The adhesive is self-crosslinking and offers good water resistance. It finds applications in various areas, such as ceiling tile coatings, dust control, textile coatings, and architectural and specialty coatings.
H.B. Fuller
Plyamul® 303
Chemical Family:
Polyvinyl Acetates (PVA)
Features:
Excellent Pigment Binding Capacity, Low Dusting, High Tensile Strength
Plyamul® 303 is a vinyl acetate adhesive that is surfactant stabilized and offers high tensile strength and excellent pigment binding properties. It is commonly used in ceiling tiles, color chips, and dust control applications in the architectural and specialty coatings industry.
ADM
ADM Non-GMO Native Starch 100 I #028113
Ingredient Name:
Corn Starch
CAS Number:
9005-25-8
Functions:
Carrier, Binder, Rheology Modifier, Thickener, Filler, Viscosity Modifier
Chemical Family:
Starches
ADM Non-GMO Native Starch 100 I #028113 is a native maize corn starch that is soluble in hot water and suited for various industrial applications. For food applications, this starch is a cost-effective option to develop texture and provide stability. This product functions as an effective aqueous rheology modifier and a powerful binding agent.
Nouryon
Bermocoll ME 1000 X
Functions:
Rheology Modifier, Humectant, Water Retention Agent, Stabilizer
Chemical Family:
Cellulose Ethers
Physical Form:
Solid, Powder
Features:
Excellent Adhesion, Improved Workability, Improved Water Retention, Consistent Properties, Excellent Stability, Improved Consistency
Bermocoll ME 1000 X is a non-ionic, water soluble cellulose ether. It improves the water retention, the consistency and the stability of water-based products.
Nouryon
Bermocoll ML 11
Functions:
Rheology Modifier, Humectant, Water Retention Agent, Stabilizer
Chemical Family:
Cellulose Ethers
Physical Form:
Solid, Powder
Features:
Excellent Adhesion, Improved Workability, Improved Water Retention, Consistent Properties, Improved Consistency
Bermocoll ML 11 is a modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll ML 11 contains methyl, ethyl and hydroxyethyl substituents giving a unique Balance between workability and strength.
Nouryon
Bermocoll ML 71
Functions:
Rheology Modifier, Humectant, Water Retention Agent, Stabilizer
Chemical Family:
Cellulose Ethers
Physical Form:
Solid, Powder
Features:
Excellent Adhesion, Improved Workability, Improved Water Retention, Consistent Properties, Improved Consistency
Bermocoll ML 71 is a low modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll ML 71 contains methyl, ethyl and hydroxyethyl substituents giving a unique Balance between workability and strength.
Wacker Chemie AG
SILRES® BS 3003
Functions:
Binder & Resin
Chemical Family:
Siloxanes, Silanes
Product Type:
Waterborne Coating, Primer
Application Area:
Facade
Application Method:
Brush, Spray, Roller
Compatible Substrates & Surfaces:
Brick, Wood, Concrete, Stone, Ceramic, Sandstone
SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.
Wacker Chemie AG
SILRES® BS 1802
Chemical Family:
Siloxanes, Silanes
Product Type:
Concrete Admixture, Solventless & High Solids Coating, Sealer
Application Area:
Facade
Compatible Substrates & Surfaces:
Concrete, Wood
SILRES® BS 1802 is an admixture for the integral waterproofing of fresh concrete in its undiluted form. Additionally, it can be utilized as a water-resisting admixture for non-load-bearing manufactured concrete products. SILRES® BS 1802 effectively prolongs the service life of concrete structures by inhibiting the alkali-silica reaction (ASR).
Wacker Chemie AG
SILRES® BS 30
Functions:
Binder
Chemical Family:
Silanes, Siloxanes
Product Type:
Solventborne Coating, Sealer, Solventless & High Solids Coating
Application Area:
Facade, Kitchenware
Application Method:
Brush, Spray
Compatible Substrates & Surfaces:
Clay, Marble, Slate, Wood, Limestone, Stone
SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.
Wacker Chemie AG
ELASTOSIL® M 4630 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making, Bathroom Accessories
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Low Hardness, Good Flow, Low Shrinkage, Low Viscosity, Pourable, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4630 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It offers a fast and non-shrink cure at room temperature, which can be significantly accelerated with the application of heat. The main application of ELASTOSIL® M 4630 A/B is in making molds for concrete casting. Additionally, this grade is compliant with FDA regulations for food contact applications.
Wacker Chemie AG
SILRES® BS 1702
Functions:
Water Repellent
Chemical Family:
Siloxanes, Silanes
End Uses:
Building Materials, Cement
Features:
Excellent Penetration, Water Resistance, Low Volatility
SILRES® BS 1702 is a solvent-free mixture of silane and siloxane that can be applied either in undiluted form or diluted with organic solvents. It is specifically designed as a high-quality specialty water repellent for impregnating fiber cement. When applied to fiber cement, SILRES® BS 1702 acts as an effective water repellent, helping to protect the material from moisture absorption and potential damage caused by water.
Wacker Chemie AG
SILRES® BS 1803
Product Type:
Concrete Admixture
Application Area:
Facade
Features:
Efflorescence Control, UV Resistant, Temperature Resistance, Vapor Permeable, Good Aesthetics, Solventless, Excellent Water Repellency , Good Weather Stability, Low Water Absorption, Good Barrier Properties, Excellent Hydrophobic Properties, Chemical Resistant, Salt Resistance
Chemical Family:
Silanes, Siloxanes
Physical Form:
Emulsion, Liquid
SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.
Wacker Chemie AG
ELASTOSIL® M 4635 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making, Bathroom Accessories
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Medium Hardness, Good Flow, Low Shrinkage, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4635 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4635 A/B is in making molds for concrete casting. This grade is also compliant with FDA and BfR regulations for food contact applications.
Wacker Chemie AG
SILRES® BS Creme C
Product Type:
Solventless & High Solids Coating, Waterborne Coating
Features:
Good Weather Stability, Consistent High Quality, Low Water Absorption, High Durability, Water Resistant, Low Volatility, Freeze/Thaw Stability, Good Aesthetics, Salt Resistance, High Capacity of Penetration, Excellent Compatibility, Breathable, Good Adhesion, Temperature Resistance, Water-based, Excellent Hydrophobic Properties, UV Resistant, Excellent Water Repellency , Good Barrier Properties, Alkali Resistant, Thixotropic
Application Area:
Facade
Compatible Substrates & Surfaces:
Concrete, Wood
Chemical Family:
Silanes
SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a high-quality specialty product designed for the hydrophobic impregnation of both normal and reinforced concrete. It is commonly used in applications related to concrete protection, construction materials, hydrophobic impregnation, and infrastructure.
Guangzhou Flying Dragon Chemical Ltd.
Flyeva 102
Applications:
Bookbinding, Construction Adhesives, Flexible Packaging Adhesives
Product Families:
Other Resins & Binders, Resins & Binders
Chemical Family:
Ethylene Vinyl Acetate (EVA)
Flyeva 102 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.
Guangzhou Flying Dragon Chemical Ltd.
Flyeva 102H
Applications:
Bookbinding, Construction Adhesives, Flexible Packaging Adhesives
Product Families:
Other Resins & Binders, Resins & Binders
Chemical Family:
Ethylene Vinyl Acetate (EVA)
Flyeva 102H is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.
Guangzhou Flying Dragon Chemical Ltd.
Flyeva 101
Chemical Family:
Ethylene Vinyl Acetate (EVA)
Compatible Substrates & Surfaces:
Metal, Wood, Plastics, Paper
Features:
Excellent Adhesion, Mechanically Stable
Flyeva 101 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.
LRBG Chemicals
LRBG Chemicals USA MF 860
Chemical Family:
Melamine Formaldehydes (MF)
LRBG Chemicals USA MF 860 is a melamine resin in powder form designed for adhesive applications and thermoset paint modification. It can be used as-is, dissolved in water, or a combination of water and alcohol. It is commonly used by the ceiling tile industry to strengthen coatings.
Blackburn Chemicals
Dispelair® P 430
Functions:
Shrinkage Reducing Agent
End Uses:
Building Materials
Features:
Good Shrinkage Resistance
Dispelair® P 430 is used as a foam control for the construction industry. It is effective in many applications at low concentrations.
Blackburn Chemicals
Dispelair® P 893
Functions:
Defoamer
End Uses:
Building Materials
Features:
Defoaming
Dispelair® P 893 is a highly effective foam control for the construction industry particularly where high compressive strength is required.
Blackburn Chemicals
Dispelair® CF 707
Functions:
Defoamer
Labeling Claims:
Kosher, Halal
Features:
Defoaming, Excellent Dispersibility
Dispelair® CF 707 is a polyglycol based foam control agent. It is a high-performance product that can be used in all types of PCEs and in systems where compatibility and clarity are not critical. This foam control agent contains 95% actives in solvent.
Blackburn Chemicals
Dispelair® P 437
Functions:
Shrinkage Reducing Agent
End Uses:
Building Materials
Features:
Good Shrinkage Resistance
Dispelair® P 437 is used as a foam control for the construction industry. It is effective in many applications at low concentrations.
Blackburn Chemicals
Dispelair® CF 268
Functions:
Defoamer
Labeling Claims:
Mineral oil-free, Kosher, Halal
Features:
Defoaming, Excellent Dispersibility, Good Compatibility, Low Foaming
Dispelair® CF 268 is a foam control agent with good dispersibility and excellent compatibility. It is used for aqueous adhesives and in the construction industry.
AB Specialty Silicones
Andisil® SF 270
Functions:
Release Agent
End Uses:
Machine/Mechanical Parts, Toys, Grommets
A release agent that in most cases provides a heat-stable film that does not carbonize at temperatures that quickly destroy many organic mold release agents. Effective as a parting agent in die casting aluminum, zinc, magnesium and other metals
AB Specialty Silicones
Andisil® SF 266
Functions:
Release Agent
End Uses:
Machine/Mechanical Parts, Toys, Grommets
A release agent that in most cases provides a heat-stable film that does not carbonize at temperatures that quickly destroy many organic mold release agents. Effective as a parting agent in die casting aluminum, zinc, magnesium and other metals
Blackburn Chemicals
Dispelair® P 947
Applications:
Repair & Rehabilitation, Performance Flooring, Ceiling Tiles
Product Families:
Cement & Concrete Additives, Construction Chemicals
End Uses:
Building Materials
Dispelair® P 947 is a highly effective foam control used for general purpose in the construction industry.
Kima Chemical
Kima Chemical HPMC MP400
Chemical Family:
Cellulose & Cellulosics
Functions:
Thickener, Emulsifier, Binder & Resin, Rheology Modifier, Dispersant
Compatible Substrates & Surfaces:
Tile, Plasters
Physical Form:
Solid, Powder
End Uses:
Powder Coating, Cement
Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
Arabian Chemical Industries
Arabian Chemical Industries ISOPOX EPL
Ready-to-Use Product Type:
2K (2 component) Adhesive, Bonding Agent
Compatible Substrates & Surfaces:
Metal, Steel, Ceramic, Wood, Concrete, Marble
Chemical Family:
Epoxy & Epoxy Derivatives
Arabian Chemical Industries ISOPOX EPL is a 100 % solids, solvent-free, 2 component, moisture insensitive, high strength adhesive with extendedworking time for numerous bonding requirements. It is a medium viscosity system which provides long pot life andspecially suited for Middle East climate.
Kima Chemical
Kima Chemical HPMC MP150MS
Chemical Family:
Cellulose & Cellulosics
Functions:
Thickener, Emulsifier, Binder & Resin, Rheology Modifier, Dispersant
Compatible Substrates & Surfaces:
Tile, Plasters
Physical Form:
Solid, Powder
End Uses:
Powder Coating, Cement
Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
Show
36
of 78 results
1
2
3