Consumer Goods
DuPont
Delrin® 150 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.
VYNOVA
VynoKlear
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Calendering, Extrusion, Injection Molding
End Uses: Flooring, Tubing, Cables, Medical Packaging
VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.
DuPont
Delrin® 500P NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, a good combination of mechanical properties, and low VOC emissions.
Mitsubishi Chemical Group
jER™ YX7105
Polymer Name: Epoxy Resins & Compounds
Function: Impact Modifier, Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Plastics, Steel, Aluminum, Ceramic
jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jERTM YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
DuPont
Kalrez® Spectrum™ 6375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant
End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump
Color: Black
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
Mitsubishi Chemical Group
jER™ YX8000D
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
End Uses: Semiconductor Applications, Radiation Curable Coating
Compatible Substrates & Surfaces: Glass, Steel, Plastics, Concrete, Fibers & Fabrics, Ceramic, Metal, Aluminum
Features: UV Curable, Radiation Curable, LED-curable, Faster Cure Time, Low Chlorine Content, Fast Cure, Transparency, Excellent Adhesion
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
DuPont
Delrin® 100 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
ZEON Corporation
Nipol® IR 2200
Polymer Name: Polyisoprene (IR)
Processing Methods: Extrusion, Injection Molding
Additives Included: Antioxidant
End Uses: Conveyor Parts, Footwear, Tires, Belts/Belt Repair
Features: Anti-Oxidant
Nipol IR is a polyisoprene rubber with high cis-1,4 using Ziegler catalyst. Nipol IR is known for its molecular structure and properties that are nearly identical to natural rubber. Nipol IR features extremely stable quality and is widely used in diverse industrial products, such as tires and belts, as a synthetic rubber alternative in place of natural rubber.UsesAuto tires, bicycles tires, aircraft tires, camelback, conveyor belts, V-belt, packings, seals, footwears, rubber thread, coated fabrics, and other extruded and molded mechanical goods. Nipol IR-2200 can be blended with other rubbers such as NR, SBR and BR, etc., and is applicable to transparent and light color products.
DuPont
Kalrez® Spectrum™ 7075
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant
End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts
Color: Black
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
Sasol
Sasol BHT
Function: Antioxidant, Stabilizer
Chemical Family: Phenols & Phenolics
BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.
DuPont
Delrin® 100P NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.
Stepan Company
STEPANTEX® VL 90 A
Function: Surfactant (Cationic), Anti-Static Agent, Fabric Softener, Fiber Softener, Surfactant
CAS Number: 91995-81-2
Chemical Name: Fatty acids, C10-20 and C16-18-unsatd., reaction products with triethanolamine, di-Me sulfate-quaternized
Certifications & Compliance: Kosher
Labeling Claims: Reprotoxic substance-free, Non-Carcinogenic, Biodegradable, Kosher, Non-Mutagenic
Active Content: 1.04 - 1.04 %
STEPANTEX® VL 90 A is a diester fabric softener quaternary providing excellent softening, good antistatic and rewetting properties. This cationic surfactant paste is well suited for the formulation of household and industrial cleaners.
DuPont
Hytrel® 6356
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion
End Uses: Fuel Tanks, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gasses and liquids.
Chi Mei Corporation
Wonderloy® PC-540
Polymer Name: PC/ABS Alloy
Processing Methods: Injection Molding
Density: 1180.0 - 1180.0 kg/m³
Flexural Modulus: 2500.0 - 2500.0 MPa
WONDERLOY® PC-540 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant Flame Retardant Halogen Free
AdvanSix
Aegis® H155C1ZP
Polymer Name: Co-Polyamide, Polyamide 6/66 (PA 6/66)
Processing Methods: Extrusion, Film Extrusion, Thermoforming, Blow Molding, Cast Film Extrusion, Blown Film Extrusion, Profile Extrusion, Compounding
Aegis® H155C1ZP is a high-viscosity nylon extrusion grade copolymer for cast or blown film applications. It possesses an attractive combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.
Mitsubishi Chemical Group
jER™ YL980
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy, Bisphenol Epoxy Resins
End Uses: Underfill, Semiconductor Applications
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic
Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Flame Retardant, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Excellent Electrical Insulation
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).BenefitsExcellent adhesivenessMaintains high electrical reliability FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)ApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Wires, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
LG Chem
LG™ PMMA IF850
Polymer Name: Polymethyl Methacrylate (PMMA)
Processing Methods: Injection Molding
End Uses: General Purpose
LG PMMA IF850 is a Polymethyl Methacrylate Acrylic material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of LG PMMA IF850 are: Flame Rated RoHS Compliant High Flow
Mitsubishi Chemical Group
jER™ YX7110
Polymer Name: Epoxy Resins & Compounds
Function: Impact Modifier, Binder, Coupling Agent, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jERTM YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
DuPont
Zytel® 70G33L NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.
DIC Corporation
DIC.PPS® Z-230
Polymer Name: Polyphenylene Sulfide (PPS)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Flame Retardant
Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black
Mitsubishi Chemical Group
jER™ YX4000
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
ZEON Corporation
Nipol® BR 1220
Polymer Name: Polybutadiene Rubber (BR)
Processing Methods: Extrusion, Injection Molding
Additives Included: Antioxidant
End Uses: Conveyor Parts, Footwear, Tires, Belts/Belt Repair
Features: Low Temperature Resistant, Anti-Oxidant, Abrasion Resistant
Nipol BR affords excellent abrasion resistance, low temperature resistance, and heating characteristics, as well as high rebound resilience. There are two types of Nipol BR-high cis-BR and low cis-BR-with different levels of cis-1,4 content, which can be selected according to the specific application. When combined with other rubbers, such as natural rubber, SBR, and NBR, Nipol BR provides and improves low-temperature performance and other characteristics, the inherent features of Nipol BR, while maintaining each rubber's unique properties. Nipol BR is widely used and has proved satisfactory in a variety of manufacturing processes for such products as tires, footwear, vibration-insulating rubber, and high impact polystyrene.UsesAuto tires, bicycle tires, aircraft tires, tire treads, camelback, conveyor belts, V-belt, packings, seals, footwear, coated fabrics, molded and extruded mechanical goods.
AdvanSix
Aegis® H100ZP
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Extrusion, Film Extrusion, Thermoforming, Cast Film Extrusion, Blown Film Extrusion
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Mitsubishi Chemical Group
jER™ YX8040
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Coupling Agent, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Labeling Claims: High Purity
jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Chandra Asri Petrochemical
Trilene PP® HI10HO
Polymer Name: Polypropylene Homopolymer (HPP)
Processing Methods: Injection Molding
Melt Flow Index: 10.0 - 10.0 g/10 min
Trilene HI10HO is a polypropylene homopolymer for containers, housewares, and general purpose injection molding applications.This grade uses Unipol® polypropylene technology with latest catalyst technology.
Greene Tweed
Chemraz™ XRZ
Polymer Name: Perfluoroelastomer (FFKM)
Features: High Purity, Low Compression Set
Chemraz XRZ is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XRZ include engineering/industrial parts and sealing applications. Primary characteristic: high purity.
DuPont
Hytrel® 4556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Coating
End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films
Density: 1140.0 - 1140.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 87.0 - 87.0 MPa
Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Hytrel® 5556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion
End Uses: Cast Films, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.
DuPont
Delrin® 500AF
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Injection Molding
Fillers Included: PTFE, PTFE Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DuPont
Delrin® SC698 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Flexural Modulus: 3000.0 - 3000.0 MPa
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.