Apparel

571 products found for Apparel in Consumer Goods
With TDS
Hide Blends
With SDS
Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Bionolle™ 3001 Md product card banner

Showa Denko

Bionolle™ 3001 MD

Polymer Name: Polybutylene Succinate Adipate (PBSA)

Processing Methods: Blow Molding

Labeling Claims: Biodegradable

Density: 1230.0 - 1230.0 kg/m³

Bionolle™ 3001 MD by Showa Denko is comprised of Polybutylene Succinate Adipate. It is commonly used It is a Biodegradable

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Bionolle™ 3020 Md product card banner

Showa Denko

Bionolle™ 3020 MD

Polymer Name: Polybutylene Succinate Adipate (PBSA)

Processing Methods: Injection Molding

Labeling Claims: Biodegradable

Density: 1230.0 - 1230.0 kg/m³

Bionolle™ 3020 MD by Showa Denko is comprised of Polybutylene Succinate Adipate. It is commonly used It is a Biodegradable

Hytrel® 4056 product card banner

DuPont

Hytrel® 4056

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 60.0 - 60.0 MPa

Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.

Seetec™ Pp H7550 product card banner

LG Chem

SEETEC™ PP H7550

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion

Additives Included: Gas Fading Stabilizer

Seetec H7550 is designed for the extrusion of continuous filament (CF). This grade is characterised by medium MWD and good processibility from specific additives, with anti-gas fading stabilization.

Nipol® Lx511a product card banner

ZEON Corporation

Nipol® LX511A

Polymer Name: NBR Latex

End Uses: Fabrics, Synthetic Leather

Features: Oil Resistant, High Elasticity, Solvent Resistant, Crosslinkable, Soft

Latex of acrylonitrile butadiene copolymer (NBR latex)Characteristics Medium-high nitrile. Easy crosslinking using zinc oxide. Film is soft and elastic. Excellent oil and solvent resistance. Sharply heat-gelatinized by organo polysiloxane copolymer. More elastic than 1571H. Applications Polishing fabrics and gaskets. Synthetic leather. Thick non-woven fabric binders, base of non-woven fabric binders for artificial leather.

Nipol® Lx433c product card banner

ZEON Corporation

Nipol® LX433C

Polymer Name: Styrene Butadiene Latex (SB Latex)

End Uses: Fabrics, Nonwovens, Synthetic Leather

Features: High Hardness

Latex of styrene-butadiene copolymer (SB latex)Characteristics Hard carboxyl SB latex. Excellent reinforcement effect, filler dispersion and combination stability. Blend with other soft Nipol latices to adjust toughness. Hard type. Effectively reinforces other SB latices. Applications Filters as impregnated non-woven fabrics, and synthetic leathers.

Zytel® E51hsb Nc010 product card banner

DuPont

Zytel® E51HSB NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.

Prime Polypro™ F113g product card banner

Prime Polymers

Prime Polypro™ F113G

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding, Stretch Films Extrusion

Prime Polypro™ F113G is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by bi-axially oriented film or injection molding and is available in Asia Pacific, Europe, or North America. Applications of Prime Polypro™ F113G include film, fabrics/fibers, household applications and yarn.Characteristics include: Homopolymer Rigid

Advanced-pp 1102k product card banner

Advanced Petrochemical Company

Advanced-PP 1102K

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion

Melt Flow Index: 3.4 - 3.4 g/10 min

Advanced-PP 1102K is a polypropylene homopolymer for extrusion and thermoforming applications.extremely low water carry-over is a special advantage for the production of raffia tapes.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Asrene® Sm5508 product card banner

Chandra Asri Petrochemical

Asrene® SM5508

Polymer Name: High Density Polyethylene (HDPE)

Processing Methods: Coextrusion, Filament Extrusion, Film Extrusion

Melt Flow Index: 0.75 - 0.75 g/10 min

Asrene® SM 5508 is a High Density Polyethylene product. It can be processed by coextrusion, filament extrusion, or film extrusion and is available in Asia Pacific, Europe, or North America. Applications of Asrene® SM 5508 include adhesives/tapes, coating applications, fabrics/fibers, film and straps/ropes.Characteristics include: Food Contact Acceptable Good Processability High Strength

Radiflam® A Fr 308 Ner product card banner

Radici Group

Radiflam® A FR 308 NER

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Filament Extrusion

Fillers Included: Mineral

Additives Included: Flame Retardant

PA66 flame retardant injection moulding grade. Halogen and phosphorus free. Black colour.Suitable for parts where fire retardancy is required. Rated V-0 at 0.4 mm according to UL-94.Also suitable for monofilament extrusion.ISO 1043 : PA66 FR(30)

Zetpol® 2230lx product card banner

ZEON Corporation

Zetpol® 2230LX

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

Processing Methods: Injection Molding

End Uses: Automotive Applications, Fabrics, Oil/Gas Applications, Hoses, Belts/Belt Repair

Features: Acid Resistant, High Temperature Strength, Oil Resistant, Steam Resistant, Ozone Resistant, Heat Resistance, Gasoline Resistant, Fuel Resistant

ZETPOL® HYDROGENATED NITRILE ELASTOMERS (HNBR) provide superior service in tough environment applications. Zetpol shows not only much higher resistance than NBR elastomers to heat, sour gasoline, and ozone, but it also provides excellent retention of properties at temperatures ranging from -40°C to +160°C. When properly compounded, Zetpol is suitable for applications where high strength at high temperature is required. Zetpol displays lower brittleness temperature than NBR with the same volume swell in gasoline, is more cost effective than FKM, and exhibits minimal deterioration when exposed to special oil additives. Zetpol resists crude oil, diesel oil, amine corrosion inhibitors, steam, and acids, making it an excellent choice for molded parts and hoses used in oilfield applications, both exploration and production. Zetpol provides excellent service up to 125°C in both animal fat and vegetable fat based biodiesel fuels, providing superior service in hose, gaskets, and seals used in automotive and heavy vehicle operations. Finally, Zetpol offers excellent service in multi-rib and timing belt applications due to its long-term dynamic performance, strength, and ozone resistance.Main Characteristics & ApplicationsZetpol HNBR Latex for cord and fabric treatments for timing belt applications. Can be used for dipping applications to improve performance compared to NBR Latex.

Aegis® H55zi product card banner

AdvanSix

Aegis® H55ZI

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Extrusion

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

Esenttia® 25h35-sb product card banner

Esenttia

ESENTTIA® 25H35-SB

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding, Extrusion Coating, Fibers Extrusion

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Esenttia® 35h35 product card banner

Esenttia

ESENTTIA® 35H35

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding, Extrusion Coating, Fibers Extrusion

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Sanprene Lq 336n product card banner

SANAM Corporation

SANPRENE LQ 336N

Polymer Name: Thermoplastic Polyurethane (Polyester based)

Chemical Family: Thermoplastic Polyurethanes (TPU), Polyurethanes (PU)

Compatible Substrates & Surfaces: Textiles

Features: Good Non-Yellowing Properties, Good Surface Finish, Breathable, Unique Surface Aspect, Low Temperature Flexibility

SANPRENE LQ-336N is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Polynil® P50/1 product card banner

Nilit

Polynil® P50/1

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Filament Extrusion, Compounding

POLYNIL® P50/1 is an unreiforced Polyamide 66 (Nylon 66) for compounding and alloying.This general pourpose 2.7 viscosity Polyamide 66 resin is FDA compliant.POLYNIL® P50/1 has moisture content lower than 0.1%.

Nipol® 1571h product card banner

ZEON Corporation

Nipol® 1571H

Polymer Name: NBR Latex

Processing Methods: Calendering, Extrusion

End Uses: Fabrics

Features: Good Adhesion, Oil Resistant, Solvent Resistant

Latex of acrylonitrile butadiene copolymer (NBR latex)CharacteristicsHigh nitrile. Standard modified carboxyl. Good infiltration, adhesive strength and low discoloration with paper, fabrics, and wood. Good oil proof properties and solvent resistance.ApplicationsPaper packing, polishing fabrics, gaskets, and battery separators.

Radilon® S 32f 100 Nat product card banner

Radici Group

Radilon® S 32F 100 NAT

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Injection Molding, Extrusion

PA6 medium viscosity extrusion grade. Natural colour.Suitable for extrusion of cast and blown films, and monofilaments.ISO 1043 : PA6

Orcosperse™ Black 2835 100 G/l product card banner

Organic Dyes and Pigments

OrcoSperse™ Black 2835 100 g/L

Color: Black

Pigment Type: Inorganic Pigments

Chemical Family: Carbon Blacks

End Uses: Waterborne Coating

OrcoSperse™ Black 2835 100 g/L is an organic aqueous pigment dispersions for textiles and nonwovens are specifically designed for printing, padding, garment dyeing, and spray applications. The wide shade range of these product lines, including bright fluorescent and earthtone colors, can be used to develop unique shade and physical special effects–just call our technical staff to develop the perfect shade and process to achieve your desired effect.

Hytrel® 7246hs Bk320 product card banner

DuPont

Hytrel® 7246HS BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 510.0 - 510.0 MPa

Hytrel® 7246HS BK320 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Zytel® E42a Nc010 product card banner

DuPont

Zytel® E42A NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating

Additives Included: Mold Release Agent

Zytel® E42A NC010 is an Unreinforced High Viscosity Polyamide 66 Developed for Extrusion

Nylene® 603 product card banner

Nylene

Nylene® 603

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Extrusion, Pipe, Profile & Tubing Extrusion, Cable Extrusion

Additives Included: Plasticizer (Unspecified)

Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.

Esenttia® 03h82 product card banner

Esenttia

ESENTTIA® 03H82

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding, Extrusion

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Radilon® S 40f 100 Nat product card banner

Radici Group

Radilon® S 40F 100 NAT

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Flexural Modulus: 2500.0 - 2500.0 MPa

PA6 high viscosity extrusion grade. Natural colour.Suitable for extrusion of cast and blown films, and monofilaments.ISO 1043 : PA6

Radiflam® A Fr 9011 Gri product card banner

Radici Group

Radiflam® A FR 9011 GRI

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Filament Extrusion

Fillers Included: Mineral

Additives Included: Flame Retardant

PA66 flame retardant injection moulding grade. Halogen and phosphorus free. Grey colour RAL 7035.Suitable for parts where fire retardancy is required. Rated V-0 at 0.4 mm according to UL-94.Also suitable for monofilament extrusion.ISO 1043 : PA66 FR(30)

Esenttia® 05h82-av product card banner

Esenttia

ESENTTIA® 05H82-AV

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding, Extrusion

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation to high speed and low water carry-over. Recommended for: Raffia Tapes for woven fabrics in high speed line where needs high tenacity and strength, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Sanprene Lq X31a product card banner

SANAM Corporation

SANPRENE LQ X31A

Polymer Name: Thermoplastic Polyurethane (Polyester based)

Chemical Family: Thermoplastic Polyurethanes (TPU), Polyurethanes (PU)

Compatible Substrates & Surfaces: Textiles

Features: Good Surface Finish, Breathable, Unique Surface Aspect, Low Temperature Flexibility

SANPRENE LQ-X31A is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Benetex® Ob product card banner

Mayzo, Inc.

Benetex® OB

Function: Optical Brightener

Compatible Polymers & Resins: Polyethylenes (PE), Polystyrenes (PS), Polyvinyl Chloride (PVC)

Chemical Name: 2,5-Bis(5- tert - butyl- benzoxazol- 2- yl) thiophene

CAS Number: 7128-64-5

Benetex OB (7128-64-5)is a heat resistant, solvent soluble, chemically stable fluorescent whitener that provides brighter looking colors. It is used to offset the yellowness of a polymer and to yield a whiter appearance. Optical brighteners create brilliance by absorbing UV light, modifying the wavelength of the light and then emitting the light in a fluorescent fashion. Benetex OB can also be used as a tracer in various applications and as an optical brightener in thermoplastics, coatings, printing inks, dyes, man-made fibers, waxes, fats, and oils.

Orcosperse™ White R 8004 160 G/l product card banner

Organic Dyes and Pigments

OrcoSperse™ White R 8004 160 g/L

Color: White

Pigment Type: Inorganic Pigments

End Uses: Waterborne Coating

OrcoSperse™ White R 8004 160 g/L is an organic aqueous pigment dispersions for textiles and nonwovens are specifically designed for printing, padding, garment dyeing, and spray applications. The wide shade range of these product lines, including bright fluorescent and earthtone colors, can be used to develop unique shade and physical special effects–just call our technical staff to develop the perfect shade and process to achieve your desired effect.

Seetec™ Pp H5300 product card banner

LG Chem

SEETEC™ PP H5300

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion, Compression Molding

Applicationwoven fabric, carpet backing, rope, split yarnFeatureSeetec H5300 is designed for the extrusion of textile yarn and monofilaments. This grade is characterised by good processibility and stretchability. SEETEC H5300 meets the FDA requirment in the code of Federal Regulations in 21 CFR 177.1520 for food contact.