Electrical & Electronics


DuPont
Kalrez® Spectrum™ 7375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals
Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties
End Uses: Semiconductor Applications, Pump Parts
Color: Black
Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.
Sasol
SASOLWAX 6530SA
End Uses: Fittings, Pipes, Cables, Wires, Footwear
SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.


Asahi Kasei Corporation
Leonaâ„¢ 1402S
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Heat Stabilizer
Flexural Modulus: 2800.0 - 2800.0 MPa
Leonaâ„¢ 1402S is a Polyamide 66 (Nylon 66) product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leonaâ„¢ 1402S include automotive, consumer goods, electrical/electronic applications and wire & cable.Characteristics include: Flame Rated Good Stiffness Good Toughness Heat Stabilizer


DuPont
MOLYKOTE® 111 Compound
Chemical Family: Silicones
Ready to Use Product Type: Sealer
Application Areas: Electrical Components, Gaskets, Valves, Seals
Application Method: Brush, Dip Coating, Wipe, Spray
Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics
MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.


Bomar Specialties LLC
Bomar Oligomers® BR-641D
Chemical Family: Urethane Acrylate/Isocyanate
Bomarâ„¢ BR-641D is a Polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass,and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene,and Polypropylene.


Nilit
Frianyl® A3 RV0
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Heat Stabilizer, Flame Retardant
FRIANYL® A3 RV0 is an unfilled Polyamide 66 (Nylon 66) compound, heat stabilized, flame retardant, halogen and red phosphorous free, UL listed V0.It is VDE certified. It is also certified according to railways requirements EN45545-2 and NFF 16-101.This compound is intended for injection molding.FRIANYL® A3 RV0 is primarily designed for the Electrical and Electronic industry. It is also suitable for Automotive or Industrial & Consumer applications.


Versalis - A subsidiary of Eni S.p.A
Clearflex® CL B0
Polymer Name: Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion
Additives Included: Antioxidant
Melt Flow Index: 3.0 - 3.0 g/10 min
Clearflex® CL B0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin has a high stretchability and a good cling effect.Main ApplicationClearflex CL B0 is recommended for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 is also used as cling agent in stretch film.
Mitsubishi Chemical Group
jERâ„¢ 1256
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Plasticizer, Binder, Adhesion Promoter, Impact Modifier
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Fibers & Fabrics, Plastics, Steel, Ceramic
jERTM 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jERâ„¢ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
DuPont
Zytel® HTN51G35EF BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 11000.0 - 11000.0 MPa
Zytel® HTN51G35EF BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin developed for electrical and electronics applications. It is also a PPA resin.
DuPont
Rynite® 935 BK505
Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester
Processing Methods: Injection Molding
Fillers Included: Glass Fiber, Mica
Flexural Modulus: 9300.0 - 9300.0 MPa
Rynite® 935 BK505 is a 35% mica/glass-reinforced modified polyethylene terephthalate resin with low warpage and excellent electrical properties.
DuPont
Crastin® LW9320 BK851
Polymer Name: PBT/SAN Alloy
Processing Methods: Injection Molding
Density: 1340.0 - 1340.0 kg/m³
Flexural Modulus: 7000.0 - 7000.0 MPa
Crastin® LW9320 BK851 is a 20% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface esthetics, excellent dimensional stability and low warpage characteristics.


ELIX Polymers, S.L.
Elixâ„¢ ABS H801
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Processing Methods: Injection Molding
Melt Flow Index: 6.0 - 6.0 g/10 min
High heat resistance, PC-modified, low emission, increased flow. Typical Applications: Radiator grille, Rear light housing, Tailgate cover, Door components, Instrument panel parts.
Kraton
Kratonâ„¢ D4150 K
Polymer Name: Styrene Butadiene Styrene (SBS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Processing Methods: Coating, Compounding
Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.


Polyplastics Group
Duracon® NW-02
Polymer Name: POM/PE Alloy
Processing Methods: Injection Molding
Density: 1360.0 - 1360.0 kg/m³
Flexural Modulus: 2200.0 - 2200.0 MPa
Tensile Strength: 52.0 - 52.0 MPa
DURACON® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated


Radici Group
Radilon® A HSK 372 M NER
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Heat Stabilizer
Radilon® A HSK 372 M NER is a PA66 injection molding grade. Internally lubricated, fast cycles, easy mold release. Suitable for high productivity applications like fasteners, connectors, cable ties.


Sumitomo Bakelite Company
Durezâ„¢ 00118
Polymer Name: Phenolic Compound, Phenol Formaldehyde (PF)
Processing Methods: Transfer Molding, Injection Molding, Compression Molding
End Uses: General Purpose, Automotive Applications, Electrical/Electronic Applications
Density: 1400.0 - 1400.0 kg/m³
Tensile Strength: 48.0 - 48.0 MPa
Durezâ„¢ 00118 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durezâ„¢ 00118 is certified as UL Flame Rated. It is available in Granules form.
Mitsubishi Chemical Group
jERâ„¢ YL983U
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins
End Uses: Underfill, Semiconductor Applications
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic
Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Good Elastic Recovery, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Low Viscosity, Excellent Electrical Insulation
jERâ„¢ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Good elastic recovery Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Low viscosity Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jERâ„¢ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Mitsubishi Chemical Group
jERâ„¢ YX7400N
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Binder, Adhesion Promoter, Impact Modifier
Chemical Family: Epoxy & Epoxy Derivatives
End Uses: Semiconductor Applications, Conformal Coating
Features: Improved Flexibility, High Impact Resistance, Good Mechanical Properties, Excellent Elasticity, Abrasion Resistance, Good Elasticity, Excellent Resilience, Impact Resistance, Reduced Wear, Improved Dimensional Stability
jERâ„¢ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jERâ„¢ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
AdvanSix
Nadone® HDR® Cyclohexanone
Chemical Name: Cyclohexanone
Function: Solvent, Intermediate
CAS Number: 108-94-1
Chemical Family: Ketones
Labeling Claims: Low Water Content, Low Toxicity, High Purity
Synonyms: Pimelic Ketone
Nadone® HDR® Cyclohexanone is ideal in high purity applications. Key benefits include uniform evaporation, minimal moisture content and a low toxicity, ecotoxicity and volatile organic compound (VOC) profile. AdvanSix Nadone® HDR® Cyclohexanone is sold to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications. High Purity Nadone® HDR® Cyclohexanone is used in the Adhesives & Sealants market as an intermediate in the production of construction adhesives; DIY and Consumer sport and fashion applications; textile and footware adhesives. High Purity Nadone® HDR® Cyclohexanone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural, commercial and residential pest control, and industrial weed and vegetation control. High Purity Nadone® HDR® Cyclohexanone is used in the Automotive and Transportation market as an intermediate in the production of coatings and finishes. High Purity Nadone® HDR® Cyclohexanone is used in the Building and Construction market as an intermediate in pipes and plumbing applications, and construction chemical adhesives. High Purity Nadone® HDR® Cyclohexanone is used in the Consumer Goods market as an intermediate in the production of appliances and electronics. High Purity Nadone® HDR® Cyclohexanone is used in the Electrical and Electronics market in the production of devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives, printed circuit boards, semiconducting manufacturing applications. High Purity Nadone® HDR® Cyclohexanone is used in the Food and Nutrition market in processing and packaging applications. High Purity Nadone® HDR® Cyclohexanone is used in the Healthcare and Pharma market in tubing and fluid handling and medical flexible packaging applications. High Purity Nadone® HDR® Cyclohexanone is used in the Paints and Coatings market in aerospace coatings, industrial and metal coatings and can coating applications. High Purity Nadone® HDR® Cyclohexanone is used in the Printing & Packaging market as a packaging can coatings, rigid packaging caps, closures, containers and tubs.


Perstorp AB
Pevalenâ„¢
Function: Plasticizer
Compatible Polymers & Resins: Polyvinyl Chloride (PVC)
Labeling Claims: Environmentally Friendly, Phthalates-free, Low Carbon Footprint, Sustainable
End Uses: Coated Fabrics, Consumer Applications, Wall Coverings, Film, Automotive Interior Parts, Wires, Automotive Interior Trim, Synthetic Leather, Flooring, Sporting Goods, Cables
Pevalenâ„¢ (CAS: 15834-04-5) is a non-phthalate plasticizer for flexible PVC. It is designed for close-to-consumer applications for a variety of industries, including automotive, building and construction, consumer goods and printing and packaging. Benefits Phthalate-free Manufacturing process reduces use of finite raw materials Features High plasticizing efficiency (equal or better vs. traditional general purpose plasticizers) Excellent processing properties Exceptional UV resistance Low volatility and smoke Applications Coated fabrics Artificial leather Flooring Wall covering Automotive interiors PVC plastisols Food contact applications Sports and leisure products Automotive interiors Pool liners


DuPont
Delrin® FG500MXD BLA090
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 3400.0 - 3400.0 MPa
Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.


DuPont
Kalrez® Spectrum™ 6380
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings
Features: Chemical Resistant, Good Mechanical Properties
End Uses: Semiconductor Applications, O Rings
Color: Cream
Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product developed specifically for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.


DuPont
Delrin® 500T BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.


Sappi Symbio
Sappi Symbio PP40
Fillers Included: Cellulose
Sappi Symbio PP40 is a cellulose fiber reinforced thermoplastic composite. It consists of virgin polypropylene and specifically selected and treated wood-based cellulose from responsibly managed forests. Due to its good balance between density, stiffness and impact resistance it can be used for a variety of applications.


Emery Oleochemicals
EDENOL® D 81
Function: Plasticizer
Chemical Family: Vegetable Oils
Compatible Polymers & Resins: Polyvinyl Chloride (PVC)
End Uses: Rigid Packaging, Conveyor Parts, Belts/Belt Repair, Heavy Duty Bags, Rigid Films, Cosmetic Packaging, Bottles, Caps, Closures, Cups
EDENOL® D 81 is a Epoxidized soybean oil product. EDENOL® specialty plasticizers improve the processability and performance of plastics. They impart flexibility and durability to the finished article. We offer a wide range of plasticizers for high performance and technical applications, including both polymeric and monomeric plasticizers.


Kraton
Kratonâ„¢ D1193 P
Polymer Name: Styrene Isoprene Styrene (SIS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Processing Methods: Compounding
Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.


Kraton
Kratonâ„¢ MD1653 M
Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.


IDI Composites International
IDIâ„¢ BMC 46-12
Function: Molding Compound
End Uses: Automotive Interior Trim, Marine Applications
PRODUCT SERIES: 40 SERIES BMCPRODUCT DESCRIPTION: DIELECTRIC & FLAME RESISTANTElectrical applications requiring a composite material that possesses a UL Yellow card and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.


Chi Mei Corporation
Acryrex® CM-207
Polymer Name: Polymethyl Methacrylate (PMMA)
Processing Methods: Extrusion, Injection Molding, Compression Molding
Density: 1190.0 - 1190.0 kg/m³
Melt Flow Index: 8.0 - 8.0 g/10 min
End Uses: Enclosure, Appliances, Electrical/Electronic Applications
ACRYREX® CM-207 is a Polymethyl Methacrylate Acrylic product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant


VYNOVA
VYNOVAâ„¢ S6630
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Extrusion
End Uses: Fittings, Conduit, Pipes, Construction Applications, Cup Holders
VYNOVAâ„¢ S6630 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.