Products results

Grupo Repol B1S25 G30XV0 is 30% Glass Reinforced, V-0 Rated Nylon 6.

PROFLEX H3 is a styrene-ethylene-butylene-styrene material for injection molding.

Anchor Seal SY6011F2 Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is fast curing, clear, adhesive coating.

GS® 4SC Sealant is a partially cross-linked butyl tape that exhibits aggressive tack to most clean and dry surfaces. This unique self-fusing sealant offers a high cohesive strength, excellent elasticity and weathering characteristics which allows GS® 4SC Sealant to endure expansion, contraction, vibration and joint movement.

Lifocolor WHITE 60/R POM is based on various carrier polymers, which facilitate the qualified white coloring of a variety of engineering polymers and standard types. These products are available from stock; products not in our standard assortment are available upon request. Lifocolor's range also has white masterbatches with low and no titanium Oxide content for common standard types and engineering polymers. The incredible coloristic characteristics of TiO2), are generally not completely achieved and must be compensated with a higher dosage. The use of compostable polymers is becoming ever more important for this reason. Our Lifocolor assortment includes an Increasing selection Of white masterbatches based on biodegradable polymers and bio-based carrier systems made of renewable resources that also meet the requirements for composability under EN 13432.

Xenopren® PP-GF-20 is a polypropylene homopolymer filled to 20% with talc. This material contains a mineral filler, which substantially modifies certain properties of basic polymer and, in particular, increases its flexural moduls of elasticity, dimensional stability and thermal resistance. This filled grade is recommended for injection-molded manufactured items, and especially for the automotives. Products, made of talc modified polypropylene are also used in electrical engineering and electric houshold items. Processing of Xenopren® PP-TD-20 requires injection molding machines with pressure of injection 80-100MPa. Recommended cylinder temperature should be about 2350C and mold temperature 700C. The average molding shrinkage of this material is 1,5%.

Alliance Magnesium Alloy AZ91D is the most commonly used magnesium die cast alloy. It is the strongest rated magnesium die cast alloy and makes up the bulk of current use. Thanks to its mechanical properties and high corrosion resistance, this alloy’s range of applications is becoming increasingly wider. It is most commonly used for casings, covers, brackets, chainsaw parts, portable tools and electronic parts.

WEVOPUR 3050 is known for highly configurable reactivity and flow characteristics. Their adhesive properties ensure reliable bonding and sustained protection of electronic components against aggressive ambient conditions.

Marshall Additive Technologies FD409 is a reactive synergist blend specially formulated to provide a good balance of flame retardant performance and reduced cost when used as a partial Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 30 and 50% of Antimony Trioxide.

TBBP-DBPE is mainly used in PP, PE, PS and ABS.

Eracure L is a high performance curative that can be used to cure TDI based prepolymers. It provides significant improvements in dynamic and high temperature properties compared with commercially available systems. It provides improvement in dynamic performance, increased service temperature of elastomers by at least 25°C, increased abrasion resistance, improved resilience, low toxicity and it imparts transparent qualities.

Deqing Toda Sanfeng Pigment Toda Color 100 EDS is fine micronized red iron oxide, easy dispersion type pigments.

PEROXAN LP-40 W is Dilauroyl peroxide 40%, Suspension in water.PEROXAN LP-40 W is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

Sunvin 36 is suitable for processing and aging conditions where high loads, low volatility and good compatibility are required. Sunvin 36 is also effective in PE, PA, PET, PC, POM, Elastomerics etc. It can be used alone or in a variety of blends and combinations with antioxidants, other UV absorbers and Light stabilizers.

NIRETAN B F25 is regionally available in Europe.

WSD Chemical Dioctyl sebacate/DOS First Grade is a superior cold-resisting plasticizer,it has good plasticizing effect and better heat endurance,light-resisting and electrical properties. It is chiefly used in processing polyvinl chloride and its copolymer,cellulosic resins and synthetic rubbers,etc..It is usually mixed with phthalic esters in use to minimize its migration rate.

FluoroFlex™ ePTFE Tubes is the material of choice for a variety of applications including bending sections, instrument covers, stent covers, endoscopic working channels, ozone delivery, vascular devices and aeration and deaeration of caustic fluids (to name a few). IPE manufactures ePTFE tubes to customer specifications from 0.7mm to 22mm I.D. with wall thicknesses ranging from .05mm to 1mm. Tubes are extruded in ePTFE and are used for medical, chemical, electrical and mechanical components where the outstanding performance characteristics of ePTFE are required.

PROFLEX CK is a styrene-ethylene-butylene-styrene material for injection molding.

Fine-Blend SAM-020 is random styrene-maleic anhydride copolymer and its appearance is colorless or light yellow pellet.

LURANYL® HT 220 G6 is a PC/ABS, injection molding grade, chlorine-, bromine- and antimon-free flame retardant.

ECA 100NC is a low viscosity, light colored, non-crystallizing which blend is based blend of methylhexahydrophthalic anhydride, hexahydrophthalic anhydride, and methyltetrahydrophthalic anhydride.. This liquid anhydride epoxy curing agent is designed for converting epoxy resins to highly cross-linked polymers with excellent physical and electrical properties.

Nilit NILAMID® B3 W GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

SEPASIL® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

GERMAFORM 27 is a polyoxymethylene (POM) copolymer material. This product is available in Europe.

Vibrant Colortech Black Universal VB 9036-E is based on PE, PP, ABS, EVA and other base polymers. The product range comprises specially selected carbon blacks for high jetness, food contact approval and for better dispersion.

Iron Oxide Red HM101 is reddish in color having globular particle shape.

COATTUN SMW.115 is a high quality Mica with high Al2O3, produced from deposits in the Cine-Milas region, Turkiye.

LURANYL® KR 2403 G6 is a PPE/PS-I, injection molding grade, 30% glass fiber reinforced, high heat resistance, high stiffness, KTW-, ACS- and WRAS-approval up to 85°C, black.

PALDUR® R 15 GB20 is a Injection Molding. Low Warpage .

Fiexiso® PET schwarz FI 13002 is an electrical insulating film made of polyethylene terephthalate and it is used as area insulating material up to and including insulation class B (130°C).

EP GC 308 is a woven glass cloth epoxy (epoxide) resin.

Stellarchem AB760LG TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material.

Dibenzylglycyl Salicylamide is also known as 5-{[Bis-(benzyl)-amino]-acetyl}-salicylamide, -{[Bis-(phenylmethyl)-amino]-acetyl}-2-hydroxybenzamide, 5-(N,N-Dibenzylglycyl)-salicylamide. It is used as chemical intermediate.

ThreeBond Europe SAS TB3301F is an electro conductive adhesive of single fluid, thermosetting type, characterized by quick hardening at elevated temperature. In contrast to solder, strong adhesion is provided for plastic, rubber and ceramic. Applicable to bonding of lead wire to electrodes.

Eco-Batch™ ECO-1120 is a styrenic polymer with high GMA content and its appearance is white transparent powder.

Benzophenone Hydrazone is also known as Diphenylmethanone Hydrazone, (Diphenylmethylene)hydrazine. It is used as intermediate in chemical manufacture.