Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Electrical & Electronics
Parts & Components
Sensors & Actuators
Products results
523 Products found
Product Families
Suppliers
Functions
End Uses
Chemical Family
Features
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Wacker Chemie AG
ELASTOSIL® RT 745 S" A/B"
Product Type:
Encapsulant, Potting Compound, 2K (2 component) Sealant
Application Area:
Housing, Electrical Components, Sensors
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
ELASTOSIL® RT 745 S" A/B" is a pourable, two-part silicone rubber that can be thermally cured. It is an addition-curing type, making it suitable for various applications. Some notable industries where it finds use are automotive, electronics, and measurement and control. Specifically, it is employed in potting and encapsulation processes, ensuring the protection and stability of sensitive components and systems.
Wacker Chemie AG
LUMISIL® LR 7601/70 A/B
Processing Methods:
Injection Molding
End Uses:
Automotive Components, Lighting Fixtures, Lighting Applications
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Low VOC, Consistent High Quality, Medium Viscosity, Excellent Dimensional Accuracy, Low Shrinkage, Good Electrical Properties, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Low Fogging, Fast Curing, UV Resistant
Tear Strength:
10.0 - 10.0 kN/m
LUMISIL® LR 7601/70 A/B is a liquid silicone rubber belonging to the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates produced from this material are characterized by their remarkable optical transparency, as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® N9111 Grey
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets
Cure Method:
Chemical Cure, Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.
Wacker Chemie AG
LUMISIL® LR 7601/50 A/B
Processing Methods:
Injection Molding
End Uses:
Automotive Components, Lighting Fixtures, Lighting Applications
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Low VOC, Consistent High Quality, Medium Viscosity, Excellent Dimensional Accuracy, Low Shrinkage, Good Electrical Properties, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Low Fogging, Fast Curing, UV Resistant
Tear Strength:
15.0 - 15.0 kN/m
LUMISIL® LR 7601/50 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® RT 601 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
2K (2 component) Sealant, Potting Compound, Encapsulant, 2K (2 component) Coating
Cure Method:
Air Dry, Chemical Cure
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber. It has a two-part formulation with a 9:1 mixing ratio. This product features low viscosity, medium cured hardness, and excellent tensile strength. The vulcanizate obtained is crystal clear and highly transparent. It is suitable for various applications such as all-round potting compound and the manufacture of molded articles through casting.
Wacker Chemie AG
ELASTOSIL® CAT UV
Functions:
Catalyst
Compatible Polymers & Resins:
Silicones
Features:
Room Temperature Vulcanizing, Long Potlife
ELASTOSIL® CAT UV is a room-temperature curing silicone rubber (RTV-2) that can be used as an organometallic catalyst for addition-curing two-part silicone rubber grades. This versatile product enables fast UV curing at room temperature while maintaining a long pot life.
Wacker Chemie AG
SEMICOSIL® 9242
Product Type:
2K (2 component) Adhesive, Encapsulant, 1K (1 component) Adhesive, Potting Compound
Application Area:
Electronic Control Unit (ECU), Housing, Electrical Components, Power Control Unit (PCU), Sensors
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.
Wacker Chemie AG
SEMICOSIL® 9981 TC
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Electrically Conductive, Good Thermal Stability, Screen Printable, Good Thermal Conductivity
Chemical Family:
Silicones
SEMICOSIL® 9981 TC is a one-part, thermally conductive paste with electrical conductivity that cures into a gap-filling silicone. The thermal paste efficiently fills the finest gaps of heat-generating and ablating substrates, minimizing contact resistance. The thermal resistance is minimized due to an exceptional thermal conductivity of 10 W/mK, in combination with the possibility of reducing bond line thickness to 10 μm.
Wacker Chemie AG
WACKER SilGel® 613
Product Type:
2K (2 component) Adhesive, Encapsulant, Potting Compound
Application Area:
Sensors, HVAC Ducts, Batteries, Electric Vehicle (EV) Batteries, Electrical Components
Cure Method:
Heat Cure, Air Dry, Chemical Cure
Chemical Family:
Silicones
WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.
Wacker Chemie AG
HDK® H18
Chemical Family:
Silica
Functions:
Rheology Modifier, Thixotrope, Thickener, Viscosity Modifier
End Uses:
Epoxy Coating, Sensors, Wind Turbine Blades
Compatible Polymers & Resins:
Epoxies (EP), Polyurethanes (PU), Vinyl Esters
Labeling Claims:
Cruelty-Free, Clean at Sephora, Credo Clean Standard, High Purity, Ulta Beauty's Conscious Beauty
INCI Name:
Silica Dimethyl Silylate
Synonyms:
Fumed Silica, Silica, Silicon Dioxide
HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.
CHT Group
CHT Group QGel 311
Product Type:
Encapsulant, Potting Compound, 2K (2 component) Adhesive
Application Area:
Passenger Protection System, Control Units, Driving Support System, Sensors, ADAS (Advanced Driver Assistance Systems)
Cure Method:
Air Dry, Chemical Cure
Chemical Family:
Silicones
CHT Group QGel 311 is a clear, soft, moderately cross-linked, general-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel that is commonly used in a variety of electronic applications.
CHT Group
CHT Group TufGel 330
Product Type:
Encapsulant, Potting Compound, 2K (2 component) Adhesive
Application Area:
Passenger Protection System, Control Units, Driving Support System, Sensors, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries, Battery Management System (BMS)
Cure Method:
Chemical Cure
Chemical Family:
Silicones
CHT Group TufGel 330 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.
CHT Group
CHT Group AS1803
Product Type:
1K (1 component) Sealant, Solvent free (100% Solids) Sealant
Application Area:
Passenger Protection System, Aerospace Applications, Control Units, PTC Heater, Automotive Converter, EV Charging Stations, Brake System, Electric Vehicle (EV) Batteries, On-board Charger, Inverter, Electric Motors, Driving Support System, LEDs, Sensors, ADAS (Advanced Driver Assistance Systems), Battery Management System (BMS)
Cure Method:
Air Dry, Moisture Cure
Application Method:
Gun
Chemical Family:
Silicones
CHT Group AS1803 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group AS1740
Chemical Family:
Silicones
Product Type:
Potting Compound, 1K (1 component) Sealant
Cure Method:
Moisture Cure
Application Area:
EV Charging Stations, Fiber Optic Cables, Control Units, Battery Management System (BMS), Compressors, Inverter, Driving Support System, Brake System, Passenger Protection System, Sensors, Automotive Converter, Electric Motors, ADAS (Advanced Driver Assistance Systems), On-board Charger, Aerospace Applications
Application Method:
Gun
Compatible Substrates & Surfaces:
Aluminum, Composites, Copper, Metal, Steel, Brass
CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.
CHT Group
CHT Group AS1707
Product Type:
1K (1 component) Sealant, Solvent free (100% Solids) Sealant
Application Area:
Passenger Protection System, Aerospace Applications, Control Units, PTC Heater, Automotive Converter, EV Charging Stations, Electronic Control Units, Brake System, Electric Vehicle (EV) Batteries, On-board Charger, Inverter, Electric Motors, Driving Support System, Sensors, ADAS (Advanced Driver Assistance Systems), Battery Management System (BMS)
Cure Method:
Moisture Cure
Application Method:
Gun
Chemical Family:
Silicones
CHT Group AS1707 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group QSil 214
Product Type:
Encapsulant, Potting Compound, 2K (2 component) Adhesive
Application Area:
Aerospace Applications, Optical Applications, LEDs, Sensors
Cure Method:
Air Dry, Chemical Cure
Chemical Family:
Silicones
CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.
CHT Group
CHT Group AS1821
Chemical Family:
Silicones
Product Type:
1K (1 component) Sealant, Solvent free (100% Solids) Sealant, Potting Compound
Cure Method:
Air Dry, Moisture Cure
Application Area:
EV Charging Stations, Connectors, Control Units, Battery Management System (BMS), Compressors, Inverter, Driving Support System, Brake System, Passenger Protection System, Sensors, Automotive Converter, Electric Motors, ADAS (Advanced Driver Assistance Systems), On-board Charger
Application Method:
Gun
CHT Group AS1821 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group SilSo Bond 14000
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:
On-board Charger, Electrical Components, Inverter, Electric Motors, Driving Support System, LEDs, Air Circulation System, Sensors, ADAS (Advanced Driver Assistance Systems), Battery Management System (BMS), Gaskets, Passenger Protection System, Seals, Control Units, PTC Heater, Automotive Converter, EV Charging Stations, Brake System, Electric Vehicle (EV) Batteries
Compatible Substrates & Surfaces:
Polycarbonate (PC), Copper, Metal
Cure Method:
Moisture Cure, Air Dry
Application Method:
Gun
Chemical Family:
Silicones
CHT Group SilSo Bond 14000 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group QSil 223
Product Type:
Encapsulant, Potting Compound, 2K (2 component) Adhesive
Application Area:
Aerospace Applications, Optical Applications, LEDs, Sensors
Cure Method:
Chemical Cure
Chemical Family:
Silicones
CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.
Wacker Chemie AG
LUMISIL® LR 7601/80 A/B
Processing Methods:
Injection Molding
End Uses:
Automotive Components, Lighting Fixtures, Lighting Applications
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Low VOC, Consistent High Quality, Medium Viscosity, Excellent Dimensional Accuracy, Low Shrinkage, Good Electrical Properties, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Low Fogging, Fast Curing, UV Resistant
Tear Strength:
9.0 - 9.0 kN/m
LUMISIL® LR 7601/80 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates obtained from this material are known for their exceptionally high optical transparency, as well as their outstanding mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® Film 2030 Sheet 250/50
Polymer Name:
Silicone Elastomer
Physical Form:
Film
Features:
High Dielectric Strength, Tracking Resistant, High Gas Permeability, Good Mechanical Properties, High Temperature Resistance, High Specific Resistivity, Low Temperature Flexibility, High Optical Transparency, Electrical Resistance
ELASTOSIL® Film 2030 Sheet 250/50 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.
Wacker Chemie AG
SEMICOSIL® 988/1K Grey
Product Type:
1K (1 component) Adhesive
Application Area:
Connectors, Power Control Unit (PCU), Sensors, Cure In Place Gasket, Form In Plastic Gaskets (FIPG), Batteries
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 988/1K Grey is a non-slump, thermally curable, one-part silicone rubber. It is a ready-to-use system that exhibits low viscosity during dispensing, making it easy to work with. This product serves as a low-thermal-stress sealing adhesive with a medium hardness. It offers high flexibility and demonstrates excellent primerless adhesion to a wide range of substrates.
Envalior
Arnite® AV2 390
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
17500.0 - 17500.0 MPa
Arnite® AV2 390 is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Envalior
Arnite® TV4 260 SXF
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® TV4 260 SXF is a high-performance engineering plastic known for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it well-suited for a wide variety of applications in the automotive, electrical, electronic, and consumer goods sectors.
Envalior
Stanyl® TW271B6
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Heat Stabilizer, Lubricant (PTFE)
Flexural Modulus:
22000.0 - 22000.0 MPa
Stanyl® TW271B6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat stabilized, wear modified, and friction modified.
Envalior
Stanyl® TW241F5
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
8400.0 - 8400.0 MPa
Stanyl® TW241F5 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Stanyl® TW341 B-MB
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341 B-MB is a high-performance polyamide 46 used for applications in automotive, E&E, gears, and outdoor power equipment. It is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Arnite® AV2 372
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® AV2 372 is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Envalior
Stanyl® TW341-B
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-B is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Arnite® TV4 230
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5600.0 - 5600.0 MPa
Arnite® TV4 230 is a high-performance engineering plastic celebrated for its impressive combination of high strength, rigidity, and excellent processing characteristics. These attributes make it well-suited for a wide spectrum of applications in the automotive, electrical and electronics, and consumer goods sectors.
Envalior
Arnite® TV4 261 HR-HS
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
9000.0 - 9000.0 MPa
Arnite® TV4 261 HR-HS is a high-performance engineering plastic known for its exceptional combination of high strength, rigidity, and excellent processing characteristics. These qualities make it a versatile choice for a wide range of applications across the automotive, electrical, electronic, and consumer goods industries.
Envalior
Stanyl® TW241F3
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Flexural Modulus:
5800.0 - 5800.0 MPa
Stanyl® TW241F3 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Stanyl® TW213F2
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Stanyl® TW213F2 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.
Envalior
Arnite® TV4 230 SF
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
6600.0 - 6600.0 MPa
Arnite® TV4 230 SF is a high-performance engineering plastic celebrated for its impressive combination of high strength, rigidity, and excellent processing characteristics. These attributes make it highly suitable for a wide variety of applications in the automotive, electrical and electronics, and consumer goods sectors.
Envalior
Stanyl® TW341-N
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-N is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Stanyl® TW341-FC
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-FC is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Show
36
of 523 results
Go to page
1
2
3
4
5
6
7
8
9
10