Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Electrical & Electronics
Wire & Cable
Data Communication Cables
Products results
392 Products found
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® CPD-450
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
High Performance, Good Colorability, Consistent High Quality, Pigmentable, High Elasticity, Light Weight, Flexible
Density:
930.0 - 930.0 kg/m³
Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts Features: Heat Stabilized Black High Melt Flow Benefits: Anti slip Noise reduction
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® BPC 80 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Fillers Included:
Talc
Melt Flow Index:
80.0 - 80.0 g/10 min
Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back). Applications: Large parts requiring ultra high flow and stiffness. Appliances Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle Features: Heat Stabilized Very High Melt Flow Benefits: Quicker cycle times Lower Pressure Molding
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® CHN-250 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Fillers Included:
Talc
Melt Flow Index:
25.0 - 25.0 g/10 min
Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding. Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle Features: Good stiffness with impact performance and high Melt flow Benefits: Easy to fill large parts
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® AGM 250 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Melt Flow Index:
20.0 - 20.0 g/10 min
Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle Features: -20 ⁰C Temperature Ductility Good Scratch Resistance Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® AGM 350 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Melt Flow Index:
34.0 - 34.0 g/10 min
Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy. Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle Features: High Melt Flow Benefits: Easy moldability with low pressure. Consistently easy to color Quick cycle time
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® 3255
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
Heat Resistance, High Performance, Cost Effective, Good Colorability, Good Adhesion, Low Density, Good Surface Appearance, Consistent High Quality, Pigmentable, High Elasticity, Light Weight
Density:
890.0 - 890.0 kg/m³
Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction
Envalior
Arnitel® EL250
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
End Uses:
Wine Taps, Cable Jacketing, Kitchenware, Flexible Grips, Cables, Support Springs, Arnitel Spring In Monitor Arm, Robotics, Electronic Accessory Cases
Density:
1080.0 - 1080.0 kg/m³
Strain at Break:
300.0 - 300.0 %
Flexural Modulus:
20.0 - 20.0 MPa
Arnitel® EL250 is a high-performance thermoplastic copolyester (TPC) known for its combination of flexibility, high-temperature resistance, strength, and excellent processing properties. It is an innovative choice, serving as a lighter, more intelligent, and environmentally friendly substitute for traditional rubbers in industries such as automotive and E&E. This contributes to reduced environmental impact and system costs. Arnitel® EL250 is specifically designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is essential.
Envalior
Arnitel® EL430
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
Density:
1130.0 - 1130.0 kg/m³
Strain at Break:
785.0 - 785.0 %
Arnitel® EL430 is a high-performance thermoplastic copolyester (TPC) known for its impressive combination of flexibility, high-temperature resistance, strength, and excellent processing properties. It serves as an innovative and eco-conscious substitute for traditional rubbers in industries like automotive and E&E. This choice contributes significantly to reducing environmental impact and system costs. Arnitel® EL430 is designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is a key consideration.
Envalior
Arnitel® EL250-08
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
Density:
1080.0 - 1080.0 kg/m³
Strain at Break:
300.0 - 300.0 %
Arnitel® EL250-08 is a high-performance thermoplastic copolyester (TPC) that excels in flexibility, high-temperature resistance, strength, and excellent processing properties. It is a forward-thinking choice, serving as a lighter, more intelligent, and environmentally friendly substitute for traditional rubbers in industries like automotive and E&E. This results in reduced environmental impact and system costs. Arnitel® EL250-08 is specifically designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is paramount.
Envalior
Arnitel® EL250/U
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
Density:
1090.0 - 1090.0 kg/m³
Strain at Break:
300.0 - 300.0 %
Arnitel® EL250/U is a high-performance thermoplastic copolyester (TPC) known for its exceptional attributes, including flexibility, high-temperature resistance, strength, and excellent processing characteristics. It is gaining increasing popularity as a lighter, more intelligent, and environmentally friendly substitute for conventional rubber across various industries. This transition leads to a notable reduction in environmental impact and system costs. One significant feature of Arnitel® EL250/U is its UV stabilization or weather stability, making it suitable for applications exposed to outdoor conditions. It is specially engineered for injection molding processes, ensuring efficient and precise manufacturing.
AGC Chemicals Americas, Inc.
Fluon+™ FP-F-FMX1
Functions:
Foaming Agent, Nucleating Agent
Processing Methods:
Gas Assisted Injection Molding, Injection Molding
Carrier:
Resin-based, Fluorinated ethylene propylene (FEP)
Features:
Cost Effective, Light Weight, Low Dielectric Constant
AGC Chemicals Americas, Inc. Fluon+™ FP-F-FMX1 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.
AGC Chemicals Americas, Inc.
Fluon+™ High Flow FXM1-9494
Functions:
Foaming Agent, Nucleating Agent
Processing Methods:
Gas Assisted Injection Molding, Injection Molding
Carrier:
Resin-based, Fluorinated ethylene propylene (FEP)
Features:
Cost Effective, Light Weight, High Flow, Low Dielectric Constant
AGC Chemicals Americas, Inc. Fluon+™ High Flow FXM1-9494 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.
Electric Cable Compounds
AquaGraft® 7020
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1450.0 - 1450.0 kg/m³
AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 61-7125
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1350.0 - 1350.0 kg/m³
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
AquaGraft® 61-7125 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 16-6008R
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Features:
Crosslinkable, High Performance, Flame Retardant, Cost Effective, Good Electrical Properties
End Uses:
Building Wire Jacketing, Wires, Communication Cable Jacketing, Building Wire Insulation, Industrial Cable Insulation, Industrial Cable Jacketing, Power Cable Jacketing, Cables, Low Voltage Insulation
Aquagraft® 16-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
Excelene 4990
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Features:
Good Colorability, Crosslinkable, Good Mechanical Properties, High Performance, Radiation Resistant, Flame Retardant, High Temperature Insulation Properties, Cost Effective, Good Electrical Properties, Flexible, Low Deformation Tendency
End Uses:
Shipboard Cable Jacketing, Building Wire Jacketing, Wires, Building Wire Insulation, Industrial Cable Insulation, Industrial Cable Jacketing, Cables, Low Voltage Insulation, Switches
Excelene 4990 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
AquaGraft® 16-5150
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1060.0 - 1060.0 kg/m³
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
AquaGraft® 16-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
Excelene 4980
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Features:
Good Colorability, Crosslinkable, Good Mechanical Properties, High Performance, Radiation Resistant, Flame Retardant, High Temperature Insulation Properties, Cost Effective, Good Electrical Properties, Flexible, Low Deformation Tendency
End Uses:
Shipboard Cable Jacketing, Building Wire Jacketing, Wires, Building Wire Insulation, Industrial Cable Insulation, Industrial Cable Jacketing, Cables, Low Voltage Insulation, Switches
Excelene 4980 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
AquaGraft® 4-5150
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1060.0 - 1060.0 kg/m³
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
AquaGraft® 4-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 8020
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1480.0 - 1480.0 kg/m³
AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
Excelene 3125
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
Excelene 3125 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
AquaGraft® 16-6010
Density:
1300.0 - 1300.0 kg/m³
Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
Excelene 3150B
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
Excelene 3150B are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
AquaGraft® 1-5150
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Welding Cable
AquaGraft® 1-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
Electric Cable Compounds
Excelene 3152
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
Excelene 3152 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
Excelene 4963A
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
Excelene 4963A are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
AquaGraft® 1-6010
Strain at Break:
450.0 - 450.0 %
Aquagraft® 1-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
Electric Cable Compounds
AquaGraft® 2-5150
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
AquaGraft® 2-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 1-6008R
Applications:
Power & Utilities, Electrical Protection, Power Transmission & Distribution
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Power Cable Jacketing
AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
Electric Cable Compounds
AquaGraft® PEMC-1
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
AquaGraft® PEMC-1 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
Electric Cable Compounds
Excelene 3151
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Low Voltage Insulation
Excelene 3151 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Daikin Industries, Ltd.
Polyflon PTFE F-302
Polymer Name:
Polytetrafluoroethylene (PTFE)
Processing Methods:
Extrusion
Polyflon PTFE F-302 is a white powder and solid material primarily used in the electrical and electronics, industrial, and printing and packaging markets. It finds applications in chemical and industrial manufacturing equipment and parts, packaging, transport packaging, parts and components, housings, enclosures, wire and cable insulation, data communication cables, and jacketing. Common end uses include coaxial cable insulation, housings, industrial tanks, plenum cable insulation, shipping containers, and tubing. This material is processed mainly through extrusion methods.
SACO AEI Polymers
THERMODAN® HF TP519CNU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Stabilizer (Unspecified), Flame Retardant
End Uses:
Cables, Wires, Low Voltage Insulation, Cable Jacketing, Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. LF200101 Liquid Micro Fine Cell
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
SACO AEI Polymers
THERMODAN® HF TP543CBU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
SACO AEI Polymers
THERMODAN® HF TP812NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
Show
36
of 392 results
Go to page
1
2
3
4
5
6
7
8
9
10