Healthcare & Pharma
CP Kelco
CEKOL® 50000 P
Chemical Name: Cellulose, carboxymethyl ether, sodium salt
Function: Thickener, Dispersant, Viscosity Modifier, Stabilizer
CAS Number: 9004-32-4
Dosage Form: Capsules, Tablets
Labeling Claims: Kosher, Halal
Certifications & Compliance: United States Pharmacopeia (USP), European Pharmacopeia (Ph. Eur.), Japan Pharmacopeia (JP), FDA IID
Synonyms: CMC Sodium salt, Cellulose Carboxymethyl Ether Sodium Salt
CEKOL® 50000 P is a highly purified Sodium Carboxymethylcellulose. It is a tasteless, odorless, thickener, stabilizer or dispersant.


Momentive Performance Materials
Silopren™ LSR 2670
Polymer Name: Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding
End Uses: Tubing, Medical/Healthcare Applications, Medical Devices, Surgical Instruments
Features: Low Temperature Flexibility, Good Tear Strength, Biocompatible, Good Colorability, Good Thermal Stability, UV Resistant, Vibration Damping, Good Stability, Radiation Sterilizable, Ethylene Oxide Sterilizable, Ozone Resistant, High Reactivity, Steam Sterilizable
Tear Strength: 30.0 - 30.0 kN/m
Silopren™ LSR 2670 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2070, Silopren™ LSR 2670 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2670 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2670 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Vibration dampers Pressure cookers parts Spark plug boots, catheters, parts of medical technical equipment s.o.


Momentive Performance Materials
LIM™ 6050-D2
Polymer Name: Liquid Silicone Rubber (LSR)
Processing Methods: Liquid Injection Molding
End Uses: Connectors, Valve Parts, Tubing, Camera Applications, Medical/Healthcare Applications, Medical Devices, Surgical Instruments, Valves, Sporting Goods
Features: High Tensile Strength, Fast Curing, Good Mold Release, High Clarity, Good Tear Strength
LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.


NuSil Technology
NuSil™ MED-6607
Ready to Use Product Type: Adhesive
Application Areas: Medical Applications
Chemical Family: Silicones
NuSil™ MED-6607 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days)."Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fi llers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is benefi cial for applications wherein a thin fi lm coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha.Comments: ONE PART, IN NAPHTHA.


NuSil Technology
NuSil™ MED-6755
Ready to Use Product Type: Encapsulant, Potting Compound
Application Areas: Medical Applications
Chemical Family: Silicones
NuSil™ MED-6755 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.Comments: 1.46 R.I., OPTICALLY CLEAR.


Versalis - A subsidiary of Eni S.p.A
Clearflex® CL D0
Polymer Name: Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion
Additives Included: Antioxidant
Melt Flow Index: 3.0 - 3.0 g/10 min
Clearflex® CL D0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).This resin is produced with a proprietary technology. Stretch films manufactured with Clearflex CL D0 have high stretchability, outstanding clarity and very high constancy in cling effect.Main ApplicationClearflex CL D0 is recommended as cling agent in stretch film but it is also used for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers.


Elastocon TPE Technologies
Elastocon® STK40
Polymer Name: Thermoplastic Elastomer (unspecified)
Processing Methods: Extrusion, Blow Molding, Injection Molding
End Uses: Surgical Instruments, Medical/Healthcare Applications, Medical Devices, Tubing
Density: 960.0 - 960.0 kg/m³
Tear Strength: 116.0 - 116.0 kN/m
Elastocon® STK40 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® STK40 is certified as FDA and RoHS Compliant. It is available in Pellets form.


Momentive Performance Materials
Tufel™ III 92506
Polymer Name: Silicone Elastomer
Processing Methods: Calendering, Extrusion
End Uses: Tubing, Pump Parts, Medical/Healthcare Applications, Medical Devices, Surgical Instruments, Valves, Industrial Applications, Hoses, Valve Parts
Features: Biocompatible, Resilient, Low Compression Set, Non Blooming
Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.
CP Kelco
CEKOL® 20000 P
Chemical Name: Cellulose, carboxymethyl ether, sodium salt
Function: Thickener, Dispersant, Viscosity Modifier, Stabilizer
CAS Number: 9004-32-4
Dosage Form: Capsules, Tablets
Labeling Claims: Kosher, Halal
Certifications & Compliance: United States Pharmacopeia (USP), European Pharmacopeia (Ph. Eur.), Japan Pharmacopeia (JP), FDA IID
Synonyms: CMC Sodium salt, Cellulose Carboxymethyl Ether Sodium Salt
CEKOL® 20000 P is a highly purified Sodium Carboxymethylcellulose. It is a tasteless, odorless, thickener, stabilizer or dispersant.
CP Kelco
KELCOGEL® CG-HA GELLAN GUM
INCI Name: Gellan Gum
Ingredient Name: Gellan Gum
Function: Thickener, Viscosity Modifier, Emulsifier, Film Former, Emulsion Stabilizer, Stabilizer
Labeling Claims: Kosher, Halal, Clean at Sephora
Certifications & Compliance: CosIng Listed, United States Pharmacopeia (USP), ISO 9001, IECIC (China)
KELCOGEL® CG-HA GELLAN GUM is a unique gelling agent for use in personal care applications. KELCOGEL CG-HA gellan gum can be used to form elastic gels, modify textures, stabilize formulations (including emulsions and suspensions) and create films.


ABITEC Corporation
Captex® 355 EP/NF/JPE
Function: Solubilizer, Viscosity Modifier, Carrier, Emollient, Bioavailability Enhancer, Lubricant
Dosage Form: Tablets, Lotions, Ointments, Creams, Capsules
Labeling Claims: Naturally Derived, Allergen-free, Vegan, CMR Substances-free, Natural, Mycotoxins-free, TSE-free, Kosher, Plant-Based, BSE-free, Non-GMO, Polychlorinated Biphenyls (PCB)-free, Aflatoxin-free
Certifications & Compliance: The Food Allergen Labeling & Consumer Protection Act of 2004 (FALCPA), Vegan, Japan Pharmacopeia (JP), GFSI Certified, Kosher, European Pharmacopeia (Ph. Eur.), Hazard Analysis Critical Control Point (HACCP), FDA Approved, BRC Certified, ISO 9001, National Formulary (NF), ISO 14001, GMP, United States Pharmacopeia (USP), Generally Recognized As Safe (GRAS), ISO 45001
Captex® 355 EP/NF/JPE is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (‰ˆ55%) and capric. It contains not less than 95% of saturated fatty acids with 8 and 10 carbon atoms. It is prepared from raw materials of vegetable sources. It is manufactured in USA.
ABITEC Corporation
Sterotex® HM
INCI Name: Hydrogenated Soybean Oil
Ingredient Name: Hydrogenated Soybean Oil
Chemical Name: Vegetable Oil, Hydrogenated
Function: Lubricant, Controlled Release Agent, Bulking Agent, Binder, Carrier, Bioavailability Enhancer, Encapsulant
CAS Number: 68334-28-1
Dosage Form: Suppositories, Capsules, Tablets
Sterotex® HM is a fully-hydrogenated, vegetable-oil powder that is widely used as a lubricant in tablet manufacturing in pharmaceutical and food supplement industries. It may be used in compacting and compounding processes in the catalyst, ceramic and powder metallurgy fields. Sterotex® HM is derived from renewable vegetable oils that are fully refined, bleached, and deodorized and is a neutral organic ester (triglyceride) that is low in ash content and is produced according to Kosher requirements. It is manufactured in USA.
ABITEC Corporation
HydroKote® C
Ingredient Name: Cottonseed Oil
Chemical Name: Cottonseed Oil, Hydrogenated
Function: Encapsulant, Controlled Release Agent, Emollient, Crystalizing Agent, Stabilizer, Re-Fatting Agent, Bioavailability Enhancer, Emulsifier, Bulking Agent
Dosage Form: Creams, Lotions, Suppositories, Ointments
HydroKote® C is a fully-hydrogenated cottonseed oil. It is a member of the crystal promoters and stearines family. It is a multi-purpose, low iodine value, high melting point oil that is further processed into flaked form for easier handling. It is manufactured in USA.


DuPont
TPSiV® 4000-75A SR
Polymer Name: Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 64.0 - 64.0 kN/m
Compression Set (70 °C): 70.0 - 70.0 %
TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.


DuPont
Liveo™ BioMedical Grade LSR Q7-4840
Polymer Name: Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed
Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.


DuPont
Liveo™ Pharma Advanced Pump Tubing
Polymer Name: Silicone Elastomer
Physical Form: Tube
Features: Contamination Protection, Superior Resiliency, Hydrophobic, Excellent Flexibility, Durable, Tear Resistance, Easily Sterilized, Excellent Filling Accuracy, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control
End Uses: Tubing, Medical/Healthcare Applications, Medical Devices
Tensile Strength: 8.9 - 8.9 MPa
Liveo™ Pharma Advanced Pump Tubing is a Translucent pharmaceutical grade silicone tubing designed for pumping of ultrapure liquids in pharmaceutical and biotechnological manufacturing processes. Made from biomedical grade tear resistant platinum-cured elastomer. Liveo™ Pharma Advanced Pump Tubing used in peristaltic pumps where durability is required. DuPont Advanced Pump Tubing offers up to four times the pump life of standard platinum cure silicone tubing.


DuPont
Liveo™ MDX4-4210
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding
End Uses: Prototyping, Medical/Healthcare Applications, Medical Devices, Mold Making
Features: Non Blooming, Translucent, Low Warpage, Consistent High Quality, Pourable, Pigmentable, Low Emissions, Good Thick Section Cure, Excellent Dielectric Properties
Liveo™ MDX4-4210 BioMedical Grade Elastomer is a pourable two- component product which, when combined, cures to a translucent silicone rubber over several hours at room temperatures, but may be more rapidly cured by application of heat.
DuPont
Liveo™ Antifoam 7-9245, 30% Simethicone Emulsion
Chemical Name: Simethicone
Function: Defoamer
CAS Number: 8050-81-5
Certifications & Compliance: FDA 21 CFR Regulations, United States Pharmacopeia (USP)
Liveo™ 7-9245, 30% Simethicone Emulsion USP is a water-dilutable, non-ionic emulsion containing 30% Simethicone USP by weight. Tested according to and complies with all United States Phatmacopeia (USP) requirements for Simethicone emulsion, It has a smooth consistency that allows the product to be poured or pumped.
DuPont
Hytrel® 7246HS NC010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion
End Uses: Hoses, Cosmetic Packaging, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Wires, Tubing, Cast Films
Density: 1250.0 - 1250.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 500.0 - 500.0 MPa
Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
DuPont
Hytrel® 4068
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Wires, Tubing, Office Automation Equipment, Cast Films
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 45.0 - 45.0 MPa
Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.
DuPont
Hytrel® G4774
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion
End Uses: Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 200.0 - 200.0 %
Flexural Modulus: 111.0 - 111.0 MPa
Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

ABITEC Corporation
Captex® 170 EP
Chemical Name: Cocoyl Caprylocaprate
Function: Carrier, Bioavailability Enhancer, Solubilizer, Solvent
CAS Number: 52623-82-2
Dosage Form: Creams, Ointments, Lotions
Labeling Claims: BSE-free, Vegan, Polychlorinated Biphenyls (PCB)-free, Aflatoxin-free, TSE-free, Non-GMO, CMR Substances-free, Mycotoxins-free
Certifications & Compliance: FDA Approved, GFSI Certified, ISO 14001, European Pharmacopeia (Ph. Eur.), Vegan, ISO 9001, ISO 45001, The Food Allergen Labeling & Consumer Protection Act of 2004 (FALCPA), BRC Certified, Generally Recognized As Safe (GRAS), Hazard Analysis Critical Control Point (HACCP), GMP
Captex® 170 EP is an ester prepared from the dehydration of coco fatty alcohols with caprylic and capric acids. It is a polar lipid suitable for solubilizing many types of active ingredients. It may also enhance translocation of API. It is manufactured in USA.
ABITEC Corporation
Sterotex® NF
INCI Name: Hydrogenated Cottonseed Oil
Chemical Name: Vegetable Oil, Hydrogenated
Function: Bulking Agent, Emollient, Occlusive, Encapsulant, Controlled Release Agent, Binder, Lubricant, Conditioner
CAS Number: 68334-28-1
Dosage Form: Tablets, Capsules, Suppositories
Ingredient Origin: Natural Origin, Plant Origin, Non-Animal Origin
Sterotex® NF is a powder that is widely used as a lubricant in tablet manufacturing in pharmaceutical and food supplement industries. It may be used in compacting and compounding processes in the catalyst, ceramic and powder metallurgy fields. Sterotex® NF is derived from fully refined, bleached and deodorized renewable vegetable oil, and is a neutral organic ester (triglyceride) that is low in ash content. Sterotex® NF is produced according to Kosher requirements. It is manufactured in USA.
NutriScience Innovations
ElastaGLO® Hydrolyzed Elastin
INCI Name: Hydrolyzed Elastin
Function: Protein Source, Supplement, Anti-Aging Agent
Ingredient Origin: Fermentation
Labeling Claims: Non-GMO, Clean at Sephora
ElastaGLO® Hydrolyzed Elastin is a highly elastic protein in the connective tissue which allows skin to return to its original position when stretched. Collagen is the main component of skin; elastin holds the collagen bundles together and gives skin its elasticity. Aging causes elastin production to slow down, therefore skin loses elasticity and wrinkles begin to form. Elastin helps restore the elasticity of skin. Hydrolyzed elastin has been shown to provide additional benefits, including improvements in vascular elasticity and blood flow. It supports joint mobility, healthy ligaments, and a healthy, non-sagging bust. Hydrolyzed elastin can also be considered for a surgical recovery product.
Shin-Etsu Pharma, Nutra and Food
Shin-Etsu AQOAT® AS-MMP
Function: Coating System
Labeling Claims: TSE-free, Allergen-free, Non-GMO, Kosher, BSE-free, Solvent-free
Certifications & Compliance: Japan Pharmacopeia (JP), GMP, The Food Allergen Labeling & Consumer Protection Act of 2004 (FALCPA), DMF Type IV, National Formulary (NF)
Dosage Form: Capsules, Tablets, Pellets
Amorphous solid dispersion is a technology for solubility enhancement of drugs.Shin-Etsu AQOAT® AS-MMP is used as solubility enhancement of poorly soluble APIs.


AB Specialty Silicones
Andisil® VS 100
Polymer Name: Siloxane Polymer
End Uses: Encapsulant, Mold Making, Dental Applications
Features: Service Life Extension, Fast Curing
Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.
Jubilant Ingrevia Limited
Jubicide PAA (Per Acetic Acid 15%) Powerful Oxidizing Agent and Disinfectant
Ingredient Name: Peracetic Acid
Chemical Name: Peracetic acid
Function: Anti-Fungal Agent, Bleaching Agent, Intermediate, Anti-Microbial Agent, Disinfectant, Oxidizing Agent
CAS Number: 79-21-0
Chemical Family: Organic Acids
Jubicide PAA (15% Peracetic Acid) is used an effective sanitizer, Dis-infectant, Sterilant and Bleaching agent for a number of Industries. It has been used for years for disinfection in food & beverage, water treatment and for bleaching and sterilization applications in healthcare and Laundry. It is used as a powerful oxidant and due to its complete biodegradability into harmless - no residue products like acetic acid, carbon dioxide and water, it is a safe and environment friendly option for disinfection.
PHARMATRANS SANAQ AG
CELLETS® 500
Chemical Name: Cellulose, Microcrystalline
Function: Carrier, Controlled Release Agent
CAS Number: 9004-34-6
Dosage Form: Capsules, Tablets, Sachets, Pellets
Labeling Claims: TSE-free, BSE-free, Naturally Derived
Certifications & Compliance: United States Pharmacopeia (USP), European Pharmacopeia (Ph. Eur.), Japan Pharmacopeia (JP), National Formulary (NF)
CELLETS® 500 has shorter and more stable layering process with high yields due to low friability and non-solubility in comparison to standard starter cores.
PHARMATRANS SANAQ AG
SSG SANAQ® Type A
Chemical Name: Sodium Carboxymethyl Starch
CAS Number: 9063-38-1
Function: Disintegrant
Manufacturing Technology: Direct Compression, Wet Granulation
Certifications & Compliance: European Pharmacopeia (Ph. Eur.), National Formulary (NF), Japan Pharmacopeia (JP), United States Pharmacopeia (USP)
SSG SANAQ® Type A is Blue color with iodine reagent
Calumet
Drakeol® 9 LT MIN OIL NF
Ingredient Name: Mineral oil
Chemical Name: White Mineral Oil
Function: Ointment Base, Anti-Sticking Agent, Carrier, Laxative, Binder, Lubricant, Release Agent
CAS Number: 8042-47-5
Dosage Form: Ointments, Capsules, Injectables
Drakeol® 9 LT MIN OIL NF is a white oils are among the most versatile products in the world, making them a standard preference across diverse industries. Due to their extreme purity, white oils provide an effective use as a base, emollient, lubricant, release agent, binder, or excipient in multiple product applications.