Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Healthcare & Pharma
Medical
Medical Devices & Assemblies
Products results
2,282 Products found
Product Families
Suppliers
Functions
End Uses
Chemical Family
Features
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
SABIC's Specialties Business
LNP™ LUBRICOMP™ Compound DX00467H
Polymer Name:
Polycarbonate (PC)
Additives Included:
Proprietary, Lubricant (Unspecified)
Fillers Included:
Silicone Oil
Processing Methods:
Injection Molding
Flexural Modulus:
2070.0 - 2070.0 MPa
SABIC's Specialties Business LNP LUBRICOMP DX00467H compound is based on Polycarbonate (PC) resin containing proprietary lubricant. Added features of this grade include: Healthcare, Wear Resistant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL™ Resin HS2000X
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1250.0 - 1250.0 kg/m³
Flexural Modulus:
3800.0 - 3800.0 MPa
SABIC's Specialties Business NORYL™ HS2000X resin is a 17% mineral reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V0 at 1.5m along with UL746C Outdoor Suitability rating of F1. NORYL™ HS2000X resin exhibits strong electrical performance, dimensional stability, very low moisture absorption, and hydrolytic stability. This material is an excellent candidate for electronic / electrical indoor and outdoor applications including air conditioner parts, smoke detector covers, pool + spa pump parts and housings.
SABIC's Specialties Business
NORYL™ Resin PX5373
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1230.0 - 1230.0 kg/m³
SABIC's Specialties Business NORYL™ PX5373 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.
SABIC's Specialties Business
NORYL™ Resin SE1GFN2
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1230.0 - 1230.0 kg/m³
SABIC's Specialties Business NORYL™ SE1GFN2 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.
SABIC's Specialties Business
LEXAN™ Copolymer EXL1494T
Polymer Name:
Polycarbonate-Siloxane Copolymer
Additives Included:
Heat Stabilizer, Flame Retardant, Mold Release Agent
Processing Methods:
Injection Molding
Flexural Modulus:
2120.0 - 2120.0 MPa
SABIC's Specialties Business LEXAN™ EXL1494T polycarbonate (PC) siloxane copolymer resin is an injection molding grade with FDA and EU food contact compliance. This resin offers extreme low temperature (-40 C) ductility in combination with medium flow characteristics, improved release and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN™ EXL1494T resin is available in transparent and opaque colors and is an excellent candidate for a broad range of food contact applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL™ Resin SE1GFN1
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1160.0 - 1160.0 kg/m³
SABIC's Specialties Business NORYL™ SE1GFN1 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI 110C. NORYL™ SE1GFN1 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for appliance internals, indoor and outdoor electrical enclosures / housings / connectors.
SABIC's Specialties Business
LNP™ LUBRICOMP™ Compound UFL36AS
Polymer Name:
Polyphthalamide (PPA)
Processing Methods:
Injection Molding
Fillers Included:
PTFE, Glass Fiber
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE), Mold Release Agent
Flexural Modulus:
10100.0 - 10100.0 MPa
SABIC's Specialties Business LNP LUBRICOMP UFL36AS compound is based on Polyphthalamide (PPA) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Heat Stabilized, Internally Lubricated, Wear Resistant.
SABIC's Specialties Business
LNP™ KONDUIT™ Compound PX10323H
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Fillers Included:
Graphite, Glass Fiber
Additives Included:
Mold Release Agent, Heat Stabilizer
Flexural Modulus:
14300.0 - 14300.0 MPa
LNP KONDUIT PX10323H compound is based on Nylon 6 resin containing glass fiber. Added features of this grade include: Thermally Conductive and Healthcare.
SABIC's Specialties Business
VALOX™ FR Resin ENH4530
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
Flexural Modulus:
6400.0 - 6400.0 MPa
SABIC's Specialties Business VALOX™ ENH4530 is a 15% glass reinforced, non-chlorinated/brominated flame retardant Polybutylene Terephthalate (PBT) injection moldable grade with excellent chemical resistance. It has a UL94V0@0.80mm flame rating. This is a good candidate for a variety of applications needing a sustainable FR PBT solution.
SABIC's Specialties Business
LNP™ LUBRICOMP™ Compound EFL34HL
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber, PTFE
Additives Included:
Lubricant (PTFE)
Flexural Modulus:
7510.0 - 7510.0 MPa
SABIC's Specialties Business LNP LUBRICOMP EFL34HL compound is based on Polyetherimide (PEI) resin containing 20% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Low Extractable.
Wacker Chemie AG
SILPURAN® 2117 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Adhesive Plaster
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2117 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications. It is especially suitable for bonding external mammary prostheses to the patient’s skin.
Wacker Chemie AG
SILPURAN® 6000/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Gaskets, Connectors, Valves, Medical/Healthcare Applications, Medical Devices
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Pigmentable, Low VOC, Excellent Surface Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® P 7671 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.5 - 1.5 kN/m
ELASTOSIL® P 7671 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
Wacker Chemie AG
ELASTOSIL® LR 5040/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® P 7600 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.5 - 1.5 kN/m
ELASTOSIL® P 7600 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
Wacker Chemie AG
SILPURAN® 6000/10 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Gaskets, Connectors, Valves, Medical/Healthcare Applications, Medical Devices
Features:
Excellent Transparency Properties, Low Volatility, Pigmentable, Low VOC, Excellent Surface Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing
Tear Strength:
13.0 - 13.0 kN/m
SILPURAN® 6000/10 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/10 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.
Wacker Chemie AG
SILPURAN® 6600/50 A/B
End Uses:
Gaskets, Valves, Medical/Healthcare Applications, Medical Devices
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Pigmentable, Low VOC, Low Friction, Excellent Surface Properties, Good Electrical Properties, Good Mechanical Properties, Fast Curing, Low Coefficient of Friction
Tear Strength:
31.0 - 31.0 kN/m
SILPURAN® 6600/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 3003/70 US A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Diaphragms, Handles, Buttons, Soft Touch Applications, Medical/Healthcare Applications, Body Implants, Medical Devices
Features:
Food Contact Acceptable, Excellent Transparency Properties, High Clarity, Good Moldability, Long Potlife, Pigmentable, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
31.0 - 31.0 kN/m
ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.
Wacker Chemie AG
SILPURAN® 6610/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Valves, Medical/Healthcare Applications, Slotted Membranes, Medical Devices
Features:
Food Contact Acceptable, Low Volatility, Low VOC, Fast Curing, Radiation Sterilizable, Excellent Surface Properties, E-Beam Sterilizable
Tear Strength:
25.0 - 25.0 kN/m
SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 5040/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
SILPURAN® 6700/50 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Good Electrical Properties, Food Contact Acceptable, Low Volatility, Good Mechanical Properties, Pigmentable, Low VOC, Fast Curing, Excellent Surface Properties
Tear Strength:
24.0 - 24.0 kN/m
SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® P 7684/40 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
6.0 - 6.0 kN/m
ELASTOSIL® P 7684/40 A/B is an addition-curing RTV-2 silicone rubber, curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.
Wacker Chemie AG
SILPURAN® 6610/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Valves, Medical/Healthcare Applications, Slotted Membranes, Medical Devices
Features:
Food Contact Acceptable, Low Volatility, Low VOC, Fast Curing, Radiation Sterilizable, Excellent Surface Properties, E-Beam Sterilizable
Tear Strength:
20.0 - 20.0 kN/m
SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
SILPURAN® 2122 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Band-Aids, Adhesive Plaster, Medical Devices
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
ELASTOSIL® LR 5040/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 5040/30 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/30 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® LR 34004/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Radiopaque, Food Contact Acceptable, X-Ray Shielding, Low Volatility, Cost Effective, Low VOC, Fast Curing
Tear Strength:
26.0 - 26.0 kN/m
ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.
Wacker Chemie AG
SILPURAN® 6000/05 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Gaskets, Connectors, Valves, Medical/Healthcare Applications, Medical Devices
Features:
Excellent Transparency Properties, Low Volatility, Pigmentable, Low VOC, Excellent Surface Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing
Tear Strength:
6.0 - 6.0 kN/m
SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.
Wacker Chemie AG
SILPURAN® 6400/40 A/B
End Uses:
Medical/Healthcare Applications, Gaskets, Medical Devices
Features:
Tear Resistance, Good Electrical Properties, Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Good Mechanical Properties, Pigmentable, Low VOC, Fast Curing, Excellent Surface Properties
Tear Strength:
15.0 - 15.0 kN/m
SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® P 7676 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Soft, Durable, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, Fast Curing, Breathable, Room Temperature Vulcanizing, Translucent, Good Aesthetics, Low Hardness, Pourable, Heat Resistance, High Durability, Excellent Flowability, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.0 - 1.0 kN/m
ELASTOSIL® P 7676 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
Wacker Chemie AG
SILPURAN® 6700/40 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Good Electrical Properties, Food Contact Acceptable, Low Volatility, Good Mechanical Properties, Pigmentable, Low VOC, Fast Curing, Excellent Surface Properties
Tear Strength:
23.0 - 23.0 kN/m
SILPURAN® 6700/40 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Its vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
SILPURAN® 2130 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Adhesive Plaster
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
SILPURAN® AUX 8251 RO
Functions:
Radiopaque Additive
Carrier:
Resin-based, Silicone
Chemical Family:
Barium Salts
Features:
X-Ray Shielding, Radiopaque, Food Contact Acceptable
SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 5040/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 5040/70 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/70 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® LR 5040/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/40 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® P 7684/60 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® P 7684/60 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.
Wacker Chemie AG
SILPURAN® 6000/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Gaskets, Connectors, Valves, Medical/Healthcare Applications, Medical Devices
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Pigmentable, Low VOC, Excellent Surface Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing
Tear Strength:
29.0 - 29.0 kN/m
SILPURAN® 6000/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Show
36
of 2,282 results
Go to page
1
2
3
4
5
6
7
8
9
10