Products results

Ulpolen® 1000 (PE1000) is a type of polyethylene with average molecular weight over 5 million. ULPOLEN1000®’s resistance to impact and wear is much higher than that of other plastics in a wide temperature interval.

Manifattura Cattaneo PE HD material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Sylvin™ 9796-66 Blue 8458 is a vinyl compound formulated for molded gas pump handles.

Saint-Gobain Vetrotex America EC13-280 T99C is a Vetrotex Direct Roving is a splice free single end roving made of E-Glass and is suitable for use in various textile technologies.

PPS functional compound for the production of plastic-bonded magnets

Von Roll Isola AR 600 P 01 is composed of epoxy resin and aramid fabric reinforcement.

Saint-Gobain Vetrotex America EC6 6 mm TC03M is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

Exac PTFE (EXTRUDED) is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Applications of Exac PTFE (EXTRUDED) include aerospace, engineering/industrial parts, electrical/electronic applications, military applications and automotive.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Solver Polyimide Polyimide Resin Composite 15PTFE can be ued for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, sciencific instrument, industrial machinery production equipment and so on. The polyimide is fit fo the application surroundings which can be temperature resisting, sealed, dimensional stability, deformatio without fracture, such as seeling ring, thrust washer sliding bearing, vacuum pump vane, valve seat, gear and so on.

SINTERLINE® Unfilled are the first polyamide 6 powder range designed for selective laser sintering (SLS). This solution yields the mechanical and thermal performance required to make 3D parts printing a compelling option for prototyping and low to medium volume production.

GEHR E-CTFE® is a linear block copolymer and belongs to the group of amorphous high-performance plastics. It is highly UV and weather resistant and also withstands high-energy (radioactive) radiation. Ethylen-Chlortrifluorethylene exhibits an extraordinary impact strength at temperatures ranging from -76 °C to +150 °C. A great part of the product properties attributes to the very smooth surface and differentiates HALAR® from other fluoropolymers. Due to the fact that E-CTFE is very pure, this material is being used to process chemicals and ultrapure water for the semiconductor industry. Also the permeation resistance to oxygen, carbon dioxide, chlorine gas and hydrochlorid acid is 10 to 100 times better than PTFE.

Fainplast Compounds Fainplast™ PVC MPH 62/OP is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/OP include medical/healthcare, engineering/industrial parts and hose/tubing.

Dhara Petrochemicals Dpnor GF-MN-312 is blend of modified polyphenylene ether and nylon 30% glass filled natural compounds for injection molding. Dpnor GF-MN-312 is widely used for pump industry, automotive industry applications.This product is available in Natural, Black & other colors.

Thermaguard™ CUI 300 is a unique inorganic single component, ambient curing polysiloxane coating formulated specifically to provide corrosion protection to under insulation environments where wet & dry cycling can occur. Novel technology which offers high solids chemistry, low VOC for demanding environmental regulations and safety aspects during hot application. The coating conforms to the NACE SP0198-2017 classification for Corrosion Under Insulation (CUI) in both cryogenic & elevated temperature applications. Through specific formulation technology Thermaguard™ CUI 300 can withstand temperatures from -196 to 300°C, fully curing at ambient conditions eliminating the need for heat curing prior to service. Thermaguard™ CUI 300 has exceptional resistance to thermal cycling, hot saline water immersion & chemical exposure throughout its operating temperature range. Thermaguard™ CUI 300 can be used in both OEM (shop application) & maintenance work due to having surface tolerance to rusted steels, which have been marginally prepared (St 2/3). Additionally, the product can be applied in service to hot equipment operating up to 300°C, removing the need for plant shut down periods.

JSR N230SV is low Mooney type N230SL and high cold flow.

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves

Techno Compound PBT4 GK 20 Natural (9952) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Saint-Gobain Vetrotex America EC6 6 mm is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

Efalon® Glass-filled C-25 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.

Sylvin™ 9796-66 Blue 8490 is a vinyl compound formulated for molded gas pump handles.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

Ulpolen® 500 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.

GEHR PEEK® can be used at very high temperatures (about +260 °C) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength. PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260 °C and a very good resistance to all kinds of radiation (even ultraviolet rays only lead to a slight yellow discolouration). PEEK is self-extinguishing properties according to UL 94.

PEROXAN BIB-40 GS is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with chalk.PEROXAN BIB-40 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Sand and other abrasives are often a challenge for pump users in the power industry. Clearances on line shaft bearings and bowl wear rings open up, increasing pump vibrations and reducing pump efficiency. Greene, Tweed's proprietary AR® thermoplastic material exhibits outstanding wear characteristics in media containing solids.AR1 offerss excellent abrasive resistance as well as chemical resistance approaching that of PTFE. AR1 is rated from ambient to 120°F (49°C). AR1 is easy to machine, and clearance requirements are easily determined. AR1 works well in a variety of pumps in the power industry including thouse working with circulating water, open and closed cooing water and river water as well as screen wash pumps. AR materials have performance characteristics that exceed traditional technologies such as cutlass rubber, bronze, and carbon materials.

KEBABLEND / TC FE 181003 PBT is a special compound based on PBT, which is thermally conductive and electrically insulating.

Sylvin™ 9796-66 Gray 9608 is a vinyl compound formulated for molded gas pump handles.

JSR N239SV is easy processing and has good balanceof oil resistance and cold resistance.

Sylvin™ 9796-66 Natural is a vinyl compound formulated for molded gas pump handles.

Titacon® GF520 20％GLASS FIBER REINFORCED, HIGH STRENGTH/STIFFNESS, HOMO-POLYACETAL.

GEHR PSU® is amber-colored, transparent material belongs to the group of amorphous high-performance plastics. Polysulfone has a good heat deflection temperature and heat aging resistance (-100 °C to +160 °C). In addition, this material has a high hardness and strength, very good hydrolytic stability and high radiation resistance (permeable to microwaves up to 2.45 GHz). PSU also has high dimensional stability and resistance to β- and γ-, X-rays and infrared rays. However, PSU is not UV stable and notch sensitive.

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications.V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance.V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold (Arctic) operating environments Mechanical seals Flow meters & sensors Seal applications that are exposed to cold situations or high temperature variations.

Dhara Petrochemicals Dpnor GF-M-212 is mPPE Black Compounds, reinforced with 20% of glass fiber, for injection molding. Dpnor GF-M-212 is widely used for submersible pump parts like bowls, impellers & diffusers, automotive parts.

Titacon® GF910 is a 10％GLASS FIBER REINFORCED, HIGH STRENGTH/STIFFNESS, DIMENSIONAL ACCURACY.

JSR N220S is typical high AN NBR.