Products results

BritePurge™ RDX- is a high-performance ready-to-use purge compound in a pellet form. Formulated in a Modified Polyolefin Carrier that delivers an aggressive combination of components designed to successfully removes carbon build-up and degraded resin. Significantly reduces down time associated with color and resin changes, and very effective for sealing the barrel and screw.

Nylon 66 (Polyamide 66)

CORAFOAM® U 310 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

Volaprint TPE 90 Natur colored molding compound.

Epoxy OH is a pigmented, thixotropic, solvent-free two-component epoxy resin. It shows high dimensional stability under heat as well as impact- and wearresistance. It is available in white and blue.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.Available in Flame Retardant

VisiJet FTI materials create durable plastic parts with excellent, high resolution detail that are tough enough for functional testing and snap-fit applications.

It is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

DuraPro ASA Red is a weatherproof and UV-resistant copolymer developed for industrial applications. It is characterized by high process reliability and is ideally suited for mechanically highly stressed components. The material is electrically insulating. DuraPro ASA is optimized for good layer adhesion, thermal stability, better flow properties and lower warping tendencies. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.Available in Flame Retardant

Poolkemie SILIMOLD AD 10 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD 10 silicon rubber is characterized by its low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of complex molds with many undercuts.

HYTAC® C1R is a toughened copolymer thermoset syntactic foam modified to provide high friction and the highest durability of any copolymer syntactic foam. Relatively new to the market (introduced in 2012) it has gained popularity for deep draw or zero draft application areas where high friction is needed. C1R was featured in the show daily at NPE 2015 after successful trials with Milliken Chemical and uVu Technologies demonstrated superior performance with transparent PP. Excellent surface characteristics are obtained straight from machining and may be easily modified with sandpaper to carry more or less material into the mold as needed. It may be polished to a very smooth surface when necessary for working with transparent plastics.

REL 99 is a silicon-based liquid release agent in a single component package that is designed to be applied directly to mold surfaces in single or multiple coat applications, allowing for quick and easy release of molded articles while maintaining mold protection. REL 99 is also recommended for in-mold applications where color stability and high temperature exotherm protection are required.

Silpak RU-435TH is a two-component, 100% solids Urethane Elastomer RTV that becomes thixotropic within minutes for creating thin, brush-on bladder molds within hours. Once cured, this urethane RTV provides a strong, durable mold with excellent tear strength. Use to create thin, flexible molds for easier de-molding or use to cut mold cost through minimizing material usage. Applications include mold making for the art, architectural, and foundry industries. Note: A Mother Mold, usually made of plaster, fiberglass or Trowel-On 60 (Thixotropic Plastic), is used to help support thin bladder mold.

Glass Sphere Reinforced Nylon Resin (PA6)

Volaprint Nylon EL Antistatic / conductive nylon polymer.

NuSil™ MED2-4213 is a fast-cure silicone adhesive.

PETG (Polyethylene Terephthalate Glycol Comonomer) 3D Printing Filament. PETG - 1 kg benefits include Great impact resistance, Natural color is very clear, Excellent chemical resistance for a clear plastic, Perfect for applications that require high durability and clarity.

BC 8165 is a low viscosity, rapid setting, rigid urethane compound. Similar to BC 8163, however exhibits an 8 to 10 minute working time. This system will cure quickly to a hard, tough, impact resistant casting. BC 8165 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. BC 8165 is recommended for thin wall model and prototype applications where a "thermoplastic feel" is desired.

RAKU® TOOL EL-2203 has a viscosity range of 400 – 700 mPas, is low in viscosity, has excellent wetting properties, and gels well at room temperature.

RG 1102 L is a Polypropylene Homopolymer With General Extrusion Additivation. It is used in Extrusion and Injection Molding Applications, Raffia, Tapes, MonoFilaments, Diary Products

Syndant MCA15 is non-halogenated flame retardants for polyamide, glass fiber modified polyamide, polyurethane foam and polyester, especially polyamide, which is suitable for processing of sorts.

PA 66 reinforced with glass fiber, heat stabilized

LAM-125 / LAM-226 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.

PA 6 reinforced with glass fiber, improved impact strength

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

Polynt Group HUP 17/30 RB-Color is generally used in cosmetics, electronic and electrical, foundries, peroxides applications.

Evopreg® EPT120 tooling prepregs are designed to help composite tooling manufacturers improve the flexibility and efficiency of their tooling manufacturing operations, by providing a combination of extended out-life and flexible curing cycles. With an out-life of 21 days, Evopreg® EPT120 prepregs are ideally suited to the production of larger, more complex tools, or to the batch production of multiple tools, ahead of a single (e.g. Weekly) scheduled cure. For applications where rapid turnaround is critical, Evopreg® EPT120 prepregs can be fully cured in a single-shot ramped cure. The prepregs can be supplied with a range of reinforcement fibers and fabric constructions. They require low pressure autoclave processing for optimum surface finish and are suitable for a range of applications including automotive, motorsport, sporting goods and general industrial.

BCC Lik-Wood/Slo is a low viscosity, quick setting, easy to use casting material. A model or tool cast from Lik-Wood/Slo will weigh 60% less than other filled urethane systems. Within 1 to 3 hours after mixing and pouring, Lik-Wood/Slo is ready to be carved, sanded, filed, tapped, etc.. Its amazing wood-like characteristics make it ideal for light-weight backing of laminates and/or surface coats. Perfect for fast take offs, cores, engineering changes, temporary molds, patterns, models, prototypes, and bases for die models.Handling Properties:BCC's Lik-Wood/Slo is a quick-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Lik-Wood/Slo contains components having very low density there will be some separation at the surface of the material in its container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For wood surfaces, 2-3 coats of a high quality sanding sealer is necessary. For plaster surfaces, seal with PVC sealer to ensure complete absence of moisture. For both wood and plaster surfaces, follow with 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 30-60 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.

VisiJet FTI materials create durable plastic parts with excellent, high resolution detail that are tough enough for functional testing and snap-fit applications.

Luvocom® 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Essentium TPU 74D-Z is a high durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. Essentium’s Z line of filaments are the only industrially-proven safe materials for ESD sensitive applications. Essentium TPU 74D-Z is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

RAKU® TOOL EL-2200 is a multipurpose, laminating and back filling resin with a viscosity of 1000–1300 mPas.