Brands results

Oxy Blast® hydrogen peroxide is our signature water treatment product with a proprietary formula developed for the residential and agricultural markets. It’s been established through many years of successful use in the well water treatment and animal production industries. The core of Oxy Blast is composed of two important elements, hydrogen and oxygen. When Oxy Blast combines with water, it increases the oxygen content in the water, yielding clearer, cleaner water.

Roller/Brush Rubber® is a uniquely engineered single component asphalt material that has been modified using the highest quality materials known to us. This Safe To Use, Water-Based, Non-Toxic, Free Of Noxious Odors and Free Of V.O.C.s product is available as a hand-applied or as a spray-applied product that meets and or exceeds all parameters set forth by the EPA

Uroflex is a unique, two-component, 100% solid urethane-modified-epoxy (UME) and cycloaliphatic cured coating and lining system. Uroflex is a high-build, self-leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete and steel. Uroflex is applicator friendly and easy to apply; conveniently produced in a one-to-one mix ratio by volume. Uroflex is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent).

Aquamag® is a high-quality magnesium hydroxide (Mg(OH)2) slurry that is a Generally Recognized As Safe (GRAS) chemical due to its non-hazardous and environmentally-friendly nature. Exclusively manufactured in the United States, from source to end-product, Premier Magnesia, LLC maintains the highest production standards when it comes to reactivity, consistency and reliable supply, ensuring a delivered product that you can depend on to meet your needs. AQUAMAG is considered a weak base that has a pH of 10.5 in its natural, delivered state. Nevertheless, it acts as a strong buffer, capable of neutralizing acids of all concentrations to roughly the 9.0 pH range.

VersaFlex VF 502 “Hybrid” Polyurea is a fast set, rapid curing, 100% solids, flexible, two-component polyurethane/polyurea elastomer spray coating material. VF 502 was developed for use in high-pressure spray equipment and is used by itself or in combination with other materials to produce a protective coating on metal, concrete, aluminum, and composite substrates. VF 502 creates an extremely tough film at all thicknesses and can produce films from 10 mils to 250 mils without visible sag or runs in single or multiple pass applications. This material is relatively moisture and temperature insensitive, allowing use in the most problematic ambient conditions.

Premier Rubber Membrane® system is a modified asphalt emulsion system using exact formulated polymers providing unique elastomeric performance. This product is engineered to achieve a seamless monolithic membrane that will bond 100% to most construction materials.

CeRam-Kote is Leaders in Ceramic Coating Technology. CeRam-Kote™ Coatings, Inc. is the manufacturer of the CeRam-Kote™ family of high performance industrial coating products. Our Corporate Office/Distribution Center consists of 70,000 square foot under roof and 10-acres of secured concrete yard located in the Industrial Airpark of Big Spring, Texas, U.S.A. We have numerous international distributors. Our company was formed in 1985. It has long been recognized for the quality Application Division services of Oil Country Tubular Goods and the Product Division that sells CeRam-Kote™ products in the can for use in all industries where critical service is essential.

Protectol® types are biocides that are rated as active substances under the European Biocidal Products Regulation. Protectol® products are used for human hygiene purposes as well as for the disinfection of surfaces, materials, equipment, and furniture and for veterinary hygiene purposes.

Cera-Lube is a high-performance, highly stable lubricant that delivers unmatched performance, durability, and wear resistance. It outlasts PTFE greases in the same applications by ten times due to its lower friction coefficient and its ability to operate in a wider range of temperatures. Cera-Lube has high load-bearing properties; a low dielectric constant; does not contain metal or silicone; and is resistant to water, steam, acids, and most chemical products, giving the lubricant greater longevity, even under intense pressures and temperatures.

Alchemco’s Duratite presents you with professional quality waterproofing and surface protection products. Whether you need to plug an existing construction leak or need to lay new concrete, DuraTite will ensure you are covered with its unique formulation for efficient waterproofing. Protect your buildings from the harsh reality of Mother Nature with our complete line of Admixes, Plugs. Utilizing it as a part of our TechCrete, CretePro, or BridgeDECK waterproofing systems will enhance your structure and ensure its longevity against the elements.

Mortartec Silicate™ is an industrial-grade blend of Portland cement, graded silica sand, fibers and silica fume. The mortar may be hand or spray applied, typically from ½” to 2” in depth. Uses include repairing concrete walls, ceilings, lining brick or concrete infrastructure, etc. Mortartec Silicate provides an extremely dense matrix and will accept coatings at earlier ages than typical Portland cement repair products.

 DYNOCEL® can give you the solution for your specific needs in adsorbents. Our adsorbents are used to remove contaminants to non-detectible levels via physical and chemical adsorption. As a global leader and expert in the manufacturing of catalysts and adsorbents, we are your long-term, solution-oriented, trustworthy partner, for off-the-shelf products or joint development projects. We can provide the adsorbent that you need to remove the contaminants that you have.

Omya Optical® Natural Alkalinity Support is a non-corrosive powder or slurry that is more cost-effective than industry standard water treatment options and efficiently manages pH and alkalinity.

PMC Organometallix is a leading global producer of a broad portfolio of stannous (tin II), monobutyltin, dibutyltin, and dioctyltin catalysts under the FASCAT brand name. Our catalysts are globally recognized for consistent performance. Quality assurance drives our manufacturing processes and provides peace of mind to our customers. As long as proper procedures are followed, FASCAT catalysts will perform consistently, batch after batch, no matter where in the world they are utilized. PMC’s broad portfolio of high purity tin catalysts is offered in packages ranging from pails to totes. Our outstanding customer service is aligned with global availability and industry-leading technical know-how. FASCAT catalysts are the world’s trusted, cost-effective solution for esterification, transesterification and urethane and siloxane cross-linking. FASCAT® catalysts are used in the production of monomeric esters (plasticizers, synthetic lubricants, and biofuels).

Finely Milled, Powdered Biogenic Aragonite Calcium Carbonate (CaCO3)

COSMACOL emollients and waxes are high purity lipophilic emollients based on linear and monobranched primary fatty alcohols. They show important dermatological properties and exhibit also a gentle, non-greasy feel. Due to their peculiar hydrophilic characteristics, COSMACOL products like COSMACOL OE or COSMACOL Esters exhibit also excellent spreadability. COSMACOL Esters are ideal formulation components for modern, high quality cosmetics. Due to their high incorporation ability of powders and pigments they are also recommended for make-up products.

Trilon® is a broad product range of high-performance and innovative complexing agents, also known as chelating agents. Trilon® chelating agents belong mainly to the class of amino carboxylates which are organic complexing agents. Chelating agents are able to prevent the deleterious impact of metal ions in technical applications. The presence of free metal ions, such as iron, copper, calcium, manganese, and further other metals, reduces the efficiency or quality of the product due to their catalytic activity, precipitation, or increased microbial growth. Trilon® chelating agents are applied in the manufacture of pulp- and paper, electronic or chemical surface treatment processes, bleaching processes in the textile/leather industry, and versatile chemical processes where metal ions can negatively impact the process.