Other Textile Applications

1,326 products found for Other Textile Applications in Industrial
With TDS
Hide Blends
With SDS
Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Dic.pps® Z-230 product card banner

DIC Corporation

DIC.PPS® Z-230

Polymer Name: Polyphenylene Sulfide (PPS)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

Aegis® H100zp product card banner

AdvanSix

Aegis® H100ZP

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Cast Film Extrusion, Pipe, Profile & Tubing Extrusion, Blown Film Extrusion

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Alfol 1618 product card banner

Sasol

ALFOL 1618

INCI Name: Cetyl Alcohol, Stearyl Alcohol

Chemical Name: 1-Hexadecanol, Stearyl Alcohol

Function: Co-Emulsifier, Rheology Modifier, Chemical Intermediate, Intermediate, Foaming Agent, Viscosity Modifier, Stabilizer, Degreaser, Emulsifier, Coupling Agent, Emulsion Stabilizer

Chemical Family: Alcohols

Ingredient Origin: Petrochemical

ALFOL 1618 Alcohol is a high purity, petrochemical-based mixture of cetyl Alcohol and stearyl Alcohol. ALFOL 1618 Alcohol is white in appearance with a sweet pungent odor. ALFOL 1618 Alcohol is classified as readily biodegradable in standard ready biodegradability tests. ALFOL 1618 Alcohol are physically and chemically equivalent to corresponding oleochemical-based Alcohols derived from such sources as coconut oil or palm oil. It can be used as is in personal care formulations or as feedstock for various chemical reactions. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Bionolle™ 3001 Md product card banner

Showa Denko

Bionolle™ 3001 MD

Polymer Name: Polybutylene Succinate Adipate (PBSA)

Processing Methods: Blow Molding

Labeling Claims: Biodegradable

Density: 1230.0 - 1230.0 kg/m³

Bionolle™ 3001 MD by Showa Denko is comprised of Polybutylene Succinate Adipate. It is commonly used It is a Biodegradable

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Silopren™ Lsr 2540 product card banner

Momentive Performance Materials

Silopren™ LSR 2540

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Coating, Injection Molding

End Uses: Textile Applications

Features: Good Stability, Good Thermal Stability, Low Temperature Flexibility, Ozone Resistant, UV Resistant, Low Viscosity, Good Colorability

Tear Strength: 27.0 - 27.0 kN/m

Silopren™ LSR 2540 is a two-component liquid silicone rubber especially developed for the coating of textiles and glassfibre fabrics.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2540 are distinguished by the following properties: low viscosity excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties long service life at dynamic stress high stability to ozone and ultraviolet light outstanding resistance to ageing excellent dielectric behaviour over a wide range of temperatures not readily combustible, does not melt or drip easy pigmentable with the LSR Colour Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2540 is particularly suitable for the following applications: textile coating for protective suits or conveyor belts, coating of glasfibre fabric sleeves, coating of fabrics for compensators, tents and other technical applications s.o.

Bionolle™ 3020 Md product card banner

Showa Denko

Bionolle™ 3020 MD

Polymer Name: Polybutylene Succinate Adipate (PBSA)

Processing Methods: Injection Molding

Labeling Claims: Biodegradable

Density: 1230.0 - 1230.0 kg/m³

Bionolle™ 3020 MD by Showa Denko is comprised of Polybutylene Succinate Adipate. It is commonly used It is a Biodegradable

Nitriflex Ntl-571 product card banner

Nitriflex

Nitriflex NTL-571

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

Features: Chemical Resistant

NTL-571 is an anionic aqueous dispersion of a carboxylated butadiene-acrylonitrile copolymer, with medium-high nitrile content.

Hytrel® 4056 product card banner

DuPont

Hytrel® 4056

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 60.0 - 60.0 MPa

Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.

Dic.pps® Fz-1140-d5 product card banner

DIC Corporation

DIC.PPS® FZ-1140-D5

Polymer Name: Polyphenylene Sulfide (PPS)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Outline: FZ-1140-D5 is a 40% glass fiber reinforced polyphenylene sulfide compound with reduced flash and improved mechanical properties for connector use. Color: Black and Natural (Brown).

Kureha Corporation Kf 1100 product card banner

Kureha Corporation

Kureha Corporation KF 1100

Polymer Name: Polyvinylidene Fluoride (PVDF)

Processing Methods: Extrusion

Kureha Corporation KF 1100 PVDF homopolymer is a medium-high viscosity PVDF resin typically processed by extrusion or compression molding. This material offers excellent chemical resistance at ambient and elevated temperatures. PVDF is also inherently UV stable, mechanically tough, abrasion.

Epomin™ P-1050 product card banner

Nippon Shokubai

EPOMIN™ P-1050

Function: Flocculant, Flame Retardant, Coupling Agent, Anti-Microbial Agent, Adhesion Promoter, Corrosion Inhibitor

Chemical Family: Polyethylenimine (PEI)

End Uses: Waterborne Adhesive & Sealant, Pressure Sensitive Adhesive, Textile Dyeing

Compatible Polymers & Resins: Polyolefins, Polyvinyl Acetate (PVA), Polyamides, Epoxies (EP), Ethylene Vinyl Acetate (EVA), Polyvinyl Chloride (PVC), Acrylics

EPOMIN™ P-1050 is the water soluble polymer which is made by polymerization of ethyleneimine. EPOMINE is not a entirely linear polymer but a partly branched polymer containing primary, secondary, and tertiary amine.

Kettlitz Chemie Antitack Np-97 product card banner

Kettlitz Chemie

Kettlitz Chemie Antitack NP-97

Function: Anti-Tack Agent

Chemical Family: Stearates

End Uses: Sporting Goods, Textile Applications, Tubing, Housewares, Tires, Footwear

Antitack NP-97 is a Pure zinc stearate dispersion of small particles, developed especially for dip tank equipment. The stearate particles are only partially hydrophobic due to the special production process. Therefore the antitack agent within the dilution shows the tendency to rise to the upper third of the dip tank. While the compound leaves the dip tank, it passes through the region of highest concentration and gets the optimum coverage of an-titack agent.

Sumikasuper® Lcp E4008 product card banner

Sumitomo Chemical

SUMIKASUPER® LCP E4008

Polymer Name: Liquid Crystal Polymer (LCP)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

SUMIKASUPER LCP is a thermotropic liquid crystalline polyester, showing the highest heat resistance among engineering plastics.

Kuraray Poval™ 4-88 product card banner

Kuraray

Kuraray Poval™ 4-88

Polymer Name: Polyvinyl Alcohol (PVOH)

Chemical Family: Polyvinyl Alcohols & Esters, Vinyls, Vinylics & Vinyl Derivatives

KURARAY POVAL™ 4-88 by Kuraray is polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. It is a water-soluble, partially saponified, odorless polymer. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Applicable for use in remoistenable adhesives. KURARAY POVAL™ 4-88 conforms to EU Directive 67/548/EC.

Zytel® E51hsb Nc010 product card banner

DuPont

Zytel® E51HSB NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.

Microsere® 5715a product card banner

The International Group Inc

MICROSERE® 5715A

Function: Aesthetic Enhancer

End Uses: Laminates, Food Packaging, Cosmetic Packaging

Certifications & Compliance: FDA Approved

Labeling Claims: Food Contact Acceptable

INCI Name: Microcrystalline Wax

MICROSERE® 5715A is a high quality microcrystalline wax ideally suited for laminating applications in foodstuffs and general purpose packaging. Laminates produced show excellent initial seal strength, good resistance to aging and are resistant to strike through at high ambient temperatures.

Dic.pps® Z-240 product card banner

DIC Corporation

DIC.PPS® Z-240

Polymer Name: Polyphenylene Sulfide (PPS)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Outline: Z-240 is a 40% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

Eporit Ge 45 product card banner

Baumeister

Eporit GE 45

Function: Curing, Crosslinking & Hardening

Chemical Family: Epoxy & Epoxy Derivatives

Eporit GE 45 is a Epoxy resin for high-wet strengt and alkali resistant paper coatings. Excellent crosslinker for carboxylated SB- and SA-dispersions. Improves water and alkali resistance of coated papers. Also used for bonding improvement in texile finishing and coating.

Luminy® Lx175 product card banner

Corbion

Luminy® LX175

Polymer Name: Polylactic Acid (PLA)

Processing Methods: Thermoforming, Film Extrusion, Fibers Extrusion

PLA is a biobased polymer derived from natural resources and offers a significant reduction in carbon footprint compared to oil-based plastics. Luminy LX175 is a high viscosity, low flow, amorphous, transparent PLA resin suitable for film extrusion, thermoforming or fiber spinning.

Prime Polypro™ F113g product card banner

Prime Polymers

Prime Polypro™ F113G

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding, Stretch Films Extrusion

Prime Polypro™ F113G is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by bi-axially oriented film or injection molding and is available in Asia Pacific, Europe, or North America. Applications of Prime Polypro™ F113G include film, fabrics/fibers, household applications and yarn.Characteristics include: Homopolymer Rigid

Advanced-pp 1102k product card banner

Advanced Petrochemical Company

Advanced-PP 1102K

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion

Melt Flow Index: 3.4 - 3.4 g/10 min

Advanced-PP 1102K is a polypropylene homopolymer for extrusion and thermoforming applications.extremely low water carry-over is a special advantage for the production of raffia tapes.

Nitriflex Ntl-525 product card banner

Nitriflex

Nitriflex NTL-525

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

NTL-525 is an anionic aqueous dispersion of a carboxylated butadiene-acrylonitrile copolymer, with medium-low nitrile content.

Parmetol® N 20 product card banner

Vink Chemicals

parmetol® N 20

Function: Biocide, Anti-Microbial Agent

End Uses: Waterborne Coating, Waterborne Adhesive & Sealant, Metalworking Fluids

parmetol® N 20 is in-can preservative without chloromethylisothiazolone and without N-/ O-formals, Suitable for fungicidal and bactericidal preservation of a broad range of water based products.

Braskem Cp360h product card banner

Braskem North America

Braskem CP360H

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Fibers Extrusion, Injection Molding, Extrusion

Melt Flow Index: 34.0 - 34.0 g/10 min

Homopolymer CP360H is a high melt flow rate homopolymer designed for spunbond nonwoven production. This resin features an excellent processability allowing increased line speed or air pressure as well as gains of mechanical properties. The narrow molecular weight distribution AGF stability and tight gel control provide its unique performance.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Nancar® Nbr 1052m30 product card banner

Nantex Industry

Nancar® NBR 1052M30

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

Processing Methods: Extrusion, Resin Transfer Molding

Features: Oil Resistant

Nancar® NBR 1052M30 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is a low Mooney version of NANCAR® 1052. The low Mooney provides optimum processing property in highly filled or reinforced compounds..

Dic.pps® Z-200-e5 product card banner

DIC Corporation

DIC.PPS® Z-200-E5

Polymer Name: Polyphenylene Sulfide (PPS)

Processing Methods: Injection Molding

Additives Included: Flame Retardant

Outline: Z-200-E5 is an un-filled super tough PPS compound with excellent flexibility and toughness compared to FZ-2100. Color: Gray

Poss® Ma0702 - Methacryloisobutyl product card banner

Hybrid Plastics

POSS® MA0702 - MethacryloIsobutyl

End Uses: Textile Applications, Cosmetic Packaging

POSS® MA0702 - MethacryloIsobutyl is used as a comonomer for increased hydrophobicity and toughness.

Pt Asahimas Chemical (Asc) Caustic Soda (Naoh) product card banner

PT Asahimas Chemical (ASC)

PT Asahimas Chemical (ASC) Caustic Soda (NaOH)

Applications: Chemical & Industrial Manufacturing, Oil, Gas & Mining, Paper & Pulp

Product Families: Technical Salts & Inorganics, Alkalis & Bases

Chemical Family: Sodium Salts, Alkalis, Bases

End Uses: Dyeing, Chemicals Production, Coatings Manufacturing

PT Asahimas Chemical (ASC) Caustic Soda (NaOH) is an essential raw material and process chemical in many industrial operations. ASC delivers Caustic Soda in 48% solution (Liquid Caustic Soda) and in solid form (Flake Caustic Soda, 98%).

Rokanol T18 (Ceteareth-18) product card banner

PCC Chemax

ROKAnol T18 (Ceteareth-18)

Function: Surfactant, Surfactant (Cationic), Dispersant & Wetting Agent

End Uses: Hydraulic Fluids, Textiles

Chemical Family: Ethoxylated Fatty Alcohols, Non-Ionics

ROKAnol T18 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols, INCI name: Ceteareth-18. The product is based on high molecular alcohol of natural origin. It is produced in the form of white wax. ROKAnol T18 has excellent emulsifying and dispersing properties. The hydrophilic-lyophilic balance (HLB) value of the product is 16.3, which places it in the group of hydrophilic emulsifiers.

Saytex® Hp-7010 product card banner

Albemarle Corp

SAYTEX® HP-7010

Function: Smoke Suppressant, Flame Retardant

Chemical Family: Brominated Compounds, Aromatics, Halogenated Compounds

Compatible Polymers & Resins: Polyamides, Polyesters

Chemical Name: Bromopolystyrene

SAYTEX® HP-7010 flame retardant is a polymeric additive containing thermally stable, aromatic bromine. It is available in powder (HP-7010P) or granule form (HP-7010G).SAYTEX HP-7010 flame retardant provides outstanding thermal stability and electrical performance. It is particularly suitable for engineering plastic applications such as polyesters (PET, PBT, PCT) and polyamides (nylons).

Tribit® 1500gn15 product card banner

Samyang Corporation

TRIBIT® 1500GN15

Polymer Name: Polybutylene Terephthalate (PBT)

Additives Included: Flame Retardant

Flexural Modulus: 5491.7 - 5491.7 MPa

TRIBIT® 1500GN15 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant