Products results

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNOL® H 30/48 M is a terpolymer consisting of approximately 70 wt.% vinyl chloride (VC), 29 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It contains carboxylate groups within its structure. This product is primarily employed as a binder for surface coating compounds and printing inks. VINNOL® H 30/48 M acts as a thermoplastic, physically drying binder that forms a film upon evaporation of the solvent in the formulation.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

GENIOSIL® GF 96 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This product finds applications in various industries, particularly in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 96 offers excellent adhesive properties and is well-suited for use in the construction and home improvement sectors.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasting a silica content ranging from 32.5 to 33.5% (as SiO2 ). This silica content arises from a blend of TEOS-derived silica and other components. This formulation is tailored for use in two-component inorganic zinc-rich primers. The product brings forth enhanced toughness and exceptional performance in high-temperature scenarios. The heightened toughness results directly from the increased silica content in contrast to an ethyl polysilicate binder.

Dynasylan® HYDROSIL 1153 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1153 takes your materials to the next level.

Dynasylan® GLYEO is a bifunctional organosilane, features a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. Its dual reactivity facilitates chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, and surface modifier, Dynasylan® GLYEO is a colorless, low-viscosity liquid with a subtle terpentine-like odor. It readily dissolves in alcohols, ketones, and aliphatic and aromatic hydrocarbons.

Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasts a silica content ranging from 32.7% to 34.0% (as SiO2). Formulated for two-component inorganic zinc-rich primers, this material brings about improved toughness and exceptional performance in high-temperature applications. The elevated SiO2 content directly contributes to its enhanced toughness.

Dynasylan® DAMO is a versatile diamino-functional silane that enhances adhesion and modifies surfaces. Acting as an adhesion promoter and surface modifier, it bridges the gap between inorganic materials and organic polymers like polyamides, PBT, PVC, and more. This silane boasts features like corrosion resistance, good impact strength, and improved mechanical properties. It's your solution for cables, pipes, and beyond. Elevate your materials with Dynasylan® DAMO.

Dynasylan® AMMO is a bifunctional organosilane, presents a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. Its dual reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Functioning as an adhesion promoter and surface modifier, Dynasylan® AMMO is a clear, colorless liquid with an amine-like odor. It shows solubility in alcohols and aliphatic and aromatic hydrocarbons.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

Dynasylan® DAMO-T is a bifunctional organosilane, equipped with two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. With this dual reactivity, Dynasylan® DAMO-T can establish chemical bonds with both inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This makes it an effective adhesion promoter and surface modifier.

Dynasylan® HYDROSIL 1151 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1151 takes your materials to the next level.

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Acrylic Bead Resins BR-117 is a thermoplastic acrylic resin, with white non-dusting bead form, specially designed for heat sealed adhesives and inks. It has excellent adhesion for metals and plastics. It is also easy to be soluble to aliphatic and alcoholic mixed solvents.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility Durability High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3294 is a polyester resin with excellent solvent solubility and is optimal as a binder for paints and inks. It exhibits excellent adhesion to plastic films, moldings and metals such as aluminum, copper, and iron. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent pigment dispersion. Can be used with cross-linking agents. Excellent chemical and weather resistance   Benefits: Solvent solubility High solid differentiation Durability   Applications: For various types of inks (Screen printing and inkjet, etc. )               PCM coatings      Solventless & High Solids Coating     *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

GENIOSIL® GF 98 is an alkoxysilane containing an amino-functional group. It is a clear, colorless to light yellowish liquid with a characteristically aromatic odor. This product is used in various applications such as building and construction adhesives, as an adhesion promoter in formulations, and as a surface modifier.

VINNAPAS® EP 8010 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers. This dispersion offers high adhesion on surfaces that are typically difficult to bond, such as polystyrene and polyester, as well as UV lacquers and others. Additionally, it provides an excellent balance between high adhesion and heat resistance in the glue line.

SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

VINNOL® E 15/40 A is a hydroxyl-containing copolymer comprising approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. Its primary application lies in serving as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

WACKER® IM 11 is a polydimethylsiloxane having carbinol functional groups in α,ω-position. WACKER® IM 11 can be used neat, in a solution, or as an emulsion. Suitable solvents for WACKER® IM 11 are aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters, higher alcohols, and ketones.

SILESTER® XAR is a ready-to-use, prehydrolyzed ethyl silicate hybrid binder. The solvent used in SILESTER® XAR is a blend of ethanol and 2-propanol. This product is conveniently prepared and can be directly utilized in the production of ceramic slips, ramming mixes, and anticorrosion paints without any further processing steps.

VINNAPAS® 547 ED (ULS) is a versatile polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of plasticizers, organic solvents, or formaldehyde donors. The residual monomer content is below 1000 ppm. VINNAPAS® 547 ED (ULS) offers several advantages in a wide range of building chemical and construction applications. It exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNOL® E 22/48 A is a copolymer composed of approximately 75 wt.% vinyl chloride (VC) and 25 wt.% carbon acid esters with hydroxyl functionality. It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® E 22/48 A undergoes film formation as the solvent within the formulation evaporates.

SILRES® BS Creme F is an aqueous, solvent-based, creamy hydrophobic impregnating agent based on a mixture of silane and siloxane. It is a high-quality specialty product recommended for the hydrophobic impregnation of natural mineral substrates such as brick, limesandstone, and sandstone. When applied correctly, it effectively reduces water uptake, provides deep penetration, and produces a desirable beading effect. Importantly, the treated surface maintains its natural appearance.

VINNAPAS® 548 ND is a high-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. The dispersion is characterized by high viscosity and good bonding strength due to high Mw PVOH.

GENIOSIL® GF 91 is an alkoxysilane that contains an amino-functional group. It is a clear, colorless to light yellow liquid with a characteristic amine odor. This product finds application in various areas, including building and construction adhesives, do-it-yourself projects, flooring installation, interior paints and coatings, and waterproofing membranes.

VINNAPAS® B 60 FG is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by the polymerization of vinyl acetate. VINNAPAS® B 60 FG is tasteless. Applications include building and construction adhesives, composites and molding, do-it-yourself, industrial adhesives, industrial coatings, and resin modification.