Products results

Anex's Pigment pastes have been developed for coloring of PU resins and vinyl acrylic resins used in coating & printing applications. They are compatible with polyurethane and vinyl acrylic due to which they provide excellent dispersion in resins. Thanks to their high anti-setlling properties, they remain stable for a long time.

MP Series is versatile microsphere pigment that can be used in a wide range of applications. Whether it's for solvent resistant inks and coatings or as colorant for flexible PVC, the MP Series offers excellent dispersibility. These pigments are based on our benzoguanamine low formaldehyde technology.

PEL-SIL™ CW300 a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic surfactants and nonionic surfactants. Even at concentrations as low as 0.1 percent, PEL-SIL™ CW300 wetting additive will reduce surface tension below 22 dynes/cm. Therefore, it produces very rapid wetting and spreading on hard-to-wet surfaces. It shows an excellent and consistent performance over a wide range of substrates in various coating formulations. Its applications are found in plastic coatings, wood coatings, radiation curing coatings, automotive coatings, and printing inks, etc. PEL-SIL™ CW300 can also be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. It allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. PEL-SIL™ CW300 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

Santicizer® 148 is a fast-fusing, non-halogen, fire retardant plasticizer used in multiple polymer systems. This plasticizer is recommended for applications where there is a need to reduce the risk of fire. Santicizer® 148 helps to suppress smoke during combustion of materials it is used in. In PVC, Santicizer® 148 acts as a high solvating plasticizer, offering permanence, faster fusion and high plasticizing efficiency.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

OMNISTAB® UV 1130 acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a pumpable liquid useful in a variety of substrates and applications.

PEL-SIL™ CD710 is a hydrophobic polyether modified organosiloxane. PEL-SIL™ CD710 minimizes foam stability and is an excellent defoamer for waterborne and solvent-based coatings and inks, and textile fiber processing applications. PEL-SIL™ CD710 is also recommended for use as a wetting agent, dispersant, and secondary emulsifier.

EBECRYL® 525 is a modified polyester resin expertly diluted with 40% tripropyleneglycol diacrylate. This product is particularly well-suited for applications in laminating adhesives, contributing to effective bonding between materials like paper/aluminum, paper/LDPE, and paper/polypropylene, among others. Additionally, EBECRYL® 525 finds recommendations for use in screen ink vehicles, providing good inter-coat adhesion, and as an adherable primer coating on metals. Its attributes include faster cycle time, low-temperature curing, low energy consumption, and long pot life, making it a good choice for radiation-curable coatings.

Anex's Pigment pastes have been developed for coloring of PU resins and vinyl acrylic resins used in coating & printing applications. They are compatible with polyurethane and vinyl acrylic due to which they provide excellent dispersion in resins. Thanks to their high anti-setlling properties, they remain stable for a long time.

Anex's Pigment pastes have been developed for coloring of PU resins and vinyl acrylic resins used in coating & printing applications. They are compatible with polyurethane and vinyl acrylic due to which they provide excellent dispersion in resins. Thanks to their high anti-setlling properties, they remain stable for a long time.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

UV479 is a UV reflection coating in the UV-C band region (250-280 nm) which has high reflectance about twice as aluminum substrate. It also has a high durability which allows its operation even at high output.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

E101 is formulated APAO polymer which is mainly used in personal hygiene, baby diapers, nonwoven gowns and drapes, incontinence mattress pads, nonwoven dental bibs, pet training pads, mattress assembly, foam bonding, fiber optic assembly.

Santicizer® 2248 is a non-halogen, extremely low- smoke, alkyl aryl fire retardant plasticizer used in multiple polymer systems. This plasticizer is recommended for applications where there is a need to reduce the risk of fire, and especially smoke. This versatile additive is specifically designed to offer improved smoke suppression.

Ammonium benzoate, a coarse, white powder, ammonium benzoate is used in the coatings industry as a cost-effective, amine-free flash rust inhibitor for ferrous substrates.

RT6723 is Formulated Butene Copolymer which is mainly used in Automotive load floor assembly, Headliner components, Automotive vibration/sound deadening, Bilaminate interior applications above and below the beltline, Carpet backing, Point of sale display, Specialty packaging, Mattress assembly, Woodworking, Office/hotel panel assembly, Office furniture, Foam bonding.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

VIVAPUR® Alginate FD 170 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 170 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

OG461 is a curing agent which find its applications in screenprinting where a good thermal resistance is required.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

EZ Series is a new class of formaldehyde free, high performance fluorescent pigment. Ezentus colorants are made with user-friendly materials that eliminate chemicals of concern without compromising performance. These versatile pigments can be used where traditional fluorescent colorants cannot. Whether it's for an ink or coatings application, where solvent resistance is needed or even compounding an EVA foam or a flexible PVC application, Ezentus will perform where other fluorescent pigments fail. EZ Series offers formulators a migration free product as well as one with improved lightfastness.

Anex's Pigment pastes have been developed for coloring of PU resins and vinyl acrylic resins used in coating & printing applications. They are compatible with polyurethane and vinyl acrylic due to which they provide excellent dispersion in resins. Thanks to their high anti-setlling properties, they remain stable for a long time.

VIVAPUR® Pectin HS RV is a water solvable pectin with a high degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel under acidic conditions in the presence of high sugar concentrations. VIVAPUR® Pectin HS RV is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

Silsurf®C410 is a silicone glycol copolymer. It is used as an emulsifier in various personal care and industrial chemical formulations. Silsurf®C410 has an INCI name of PEG-10 Dimethicone.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.