Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Composite Materials
Surface Finishes
Products results
414 Products found
Matching product categories
Gelcoats & Topcoats
Surface Veils
Adhesives
Other Surface Finishes
Suppliers
Applications
End Uses
Chemical Family
Functions
Processing Methods
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Polynt Group
POLYCOR® 998 BASE WHITE
Functions:
Surface Finish
Color:
White
Features:
Excellent Toughness, High Toughness
Polycor® 998 Base White series enamels are formulated to be used as topcoats on fiberglass laminates. Enamels are very similar to gel coats except they cure tack-free on the open surface. Enamels are used to seal and hide a substrate. Normally they are used as interior finishes and yield a pigmented surface. Polycor® 998 series enamels were primarily developed for marine applications; however, they can be used in any FRP application where high performance characteristics are desired. Polycor® 998 series enamels produce a hard, tough, durable coating that reduces maintenance on composites parts. Polycor® 998 series enamels cure to a flat finish. Standard enamels should not be used for water immersion service due to potential water spotting and water blistering. Contact a sales representative for a recommendation if water immersion is required. Polycor® 998 series enamels meet the EPA national emission standards for hazardous air pollutants NESHAP for both marine manufacturing and reinforced composites production. Polycor® 998 series enamels contain wax. The wax is essential to yielding a tack-free surface in the top coating application. The wax also helps to suppress the volatile organic compounds emitted in to the air. Together the low VOC or hap content and wax results in:reduced monomer emissionsless odorsmoother sprayed film less orange peel less overspray due to the wax, Polycor® 998 series enamels should not be used as an in-mold coating where they will be backed by laminate or other materials. Delamination could occur. Enamels require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. These enamels are available in White or any of the Colors listed in the standard gel coat color card. Special Colors are available upon request.
Polynt Group
BATHCOTE® 992 NEUTRAL BASE
Functions:
Surface Finish
Bathcote® 992 Neutral Base gel coats are high performance products formulated for the sanitary-ware industries. These gel coats have low volatile organic compound properties. Bathcote® gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced composites construction. While offering these benefits, polynt composites gel coats have retained the important construction application qualities customers have come to expect from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; good patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt composites' 992 series gel coats. The bathcote® 992 series resist blistering because they are formulated to provide high performance against water and certain chemicals. These gel coats were primarily developed for sanitary applications. These gel coats provide durable, reduced maintenance products. Polynt composites gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, IAPMO/ANSI Z124.1 .2 -2005, section 6.1. This product series has received certification from the canadian standards association CSA and is eligible to bear the CSA trademark. These gel coats require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure.
Polynt Group
POLYCOR® ISO NPG BR WHITE 9199
Chemical Family:
Glycols, Polyesters, Unsaturated Polyester (UPE), Diols, Isophthalics
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed
Polynt Group
POLYCOR® TOP COAT PA WHITE 9199
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
Polynt Group
POLYCOR® 945 NEUTRAL BASE
Functions:
Surface Finish
Features:
High Durability
Polycor® 945 Neutral Base - polyester and vinyl ester tooling gel coats. Formulated specifically for mold making. High gloss and hard, durable surfaces. It is generally used in textile industry applicatons.
Polynt Group
ARMORFLEX® 99F PA 9199
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White
Features:
High Impact Resistance
ARMORFLEX® 99F PA 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.In conjunction with vinyl ester barrier coats or skin coats will provide a durable osmotic resistant composite suitable for marine hulls.
Polynt Group
EPOVIA ORTHO BR
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Functions:
Surface Finish
Color:
White
EPOVIA ORTHO BR - Orthophthalic,good workability,available in a range of white and or color. Main Applications areas are Agrochemical,Agrobusiness,Solvents etc.
Sogel Inc
Sogel Inc Vinyl ester Laminated
Chemical Family:
Vinyl Esters, Vinyls, Vinylics & Vinyl Derivatives
Functions:
Surface Finish
Processing Methods:
Spray Lay-up, Continuous Lamination, Hand Lay-up
Features:
Excellent Chalk Resistance, Crack Resistant, Enhanced Physical Properties, Low Blistering, Excellent Surface Finish, Good UV Protection, Good Bright Luster, UV Protection, Improved Flexibility, Good Surface Finish, Excellent Gloss Retention, Blush Resistant, Good UV Resistance
Our vinyl ester laminating resin was formulated with an epoxy vinyl ester polymer This gives it very good physical properties and a high resistance to corrosion and penetration of water. This resin is recommended for the manufacture of FRP structures of small to large size with high production rates at room temperature. It is formulated to cure at room temperature with methyl ethyl ketone peroxide.
AeroWindTech
AeroWindTech AWTPP 601
Chemical Family:
Polyesters
Functions:
Surface Finish
Processing Methods:
Vacuum Bagging, Hand Lay-up
AeroWindTech AWTPP 601 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-601 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish -N or the -SRG crosslinked Polymer for superb release.
Sogel Inc
Sogel Inc Sanding Gel coats
Chemical Family:
Polyesters
Functions:
Surface Finish
Features:
Low Shrinkage, Excellent Chalk Resistance, Crack Resistant, Low Blistering, High Elongation, Excellent Surface Finish, Good UV Protection, Good Sanding Properties, Good Bright Luster, Low Porosity, UV Protection, Improved Flexibility, Good Surface Finish, Excellent Gloss Retention, Blush Resistant, Good UV Resistance
Sogel Sanding Gel coats were developed from a polyester resin to provide very good elongation to reduce cracks. In addition, it has a low volume shrinkage which gives a better surface finish. Their rheological properties give them optimal vaporization characteristics, to resist porosity and flow on vertical walls.
KarpatSmoly
KarpatSmoly MUF Resin
Functions:
Resin, Surface Finish, Adhesive
KarpatSmoly MUF Resin is an aqueous suspension, non-flammable, non-explosive. The finished product contains 10% – 24%of melamine by weight.
Polynt Group
POLYCOR® 969 BASE WHITE
Functions:
Surface Finish
Color:
White
Polycor® 969 Base White sanding gel coats have been specifically formulated for use as a sanding substrate. Sanding gel coats are used for FRP parts that will be subsequently painted. They can be used for room temperature and heated molding rtm applications. These products can be post baked at temperatures up to 285°f for as long as two hours. They may also be used for utility, noncritical exterior applications. They are not intended Nor should they be used as a surface coat for the marine, tub/shower or swimming pool industries. They should not be used for water immersion service boat hull, swimming pool, spa, water tank, etc. , even if/when painted. Polycor® 969 series sanding gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced composites production. Some versions in the Polycor® 969 series are formulated to meet south coast air quality management district SCAQMD rule 1162.
Compoflex
SURFITEX™ EU 45 G NL
Functions:
Surface Finish
End Uses:
Pipes, Tanks, Wind Turbine Blades
Processing Methods:
Hand Lay-up, Pultrusion, Vacuum Infusion Processing (VIP), Resin Transfer Molding (RTM), Filament Winding
SURFITEX™ EU 45 G NL is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.
Resoltech
RESOLCOAT 7090 CLEAR
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Resin Film Infusion (RFI)
Functions:
Surface Finish
Color:
Transparent
Features:
Good Mechanical Properties, Low Toxicity, High Glass Transition Temperature
RESOLCOAT 7090 CLEAR is a high TG gelcoat specially formulated for the production of tooling and structural composites parts requiring high service temperatures. This gelcoat may be applied from thicknesses from 300 to 600 microns depending if it is for parts or tool manufacturing where thickness of 600 microns is recommended.
Schmelzer Industries
Schmelzer Industries PEARLVEIL 7 mil
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Veil
Functions:
Surface Finish
Processing Methods:
Vacuum Infusion Processing (VIP), Compression Molding, Continuous Lamination, Resin Transfer Molding (RTM), Filament Winding
Schmelzer Industries PEARLVEIL 7 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).
Scott & Fyfe
POLYFORM VEIL MAT PVM/600/V40/120
Functions:
Surface Finish, Reinforcement
Reinforcement Material:
Polyester, Glass Fibers
Reinforcement Form:
Veil, Mat
Compatible Polymers & Resins:
Polyesters
Processing Methods:
Pultrusion
Features:
Good Surface Finish, Dimensional Stability, Excellent Surface Finish, Improved Dimensional Stability, Easier Processing
Polyform Veil Mat PVM/600/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.
Sogel Inc
Sogel Inc Vinyl Ester Barrier Coat
Chemical Family:
Vinyl Esters, Vinyls, Vinylics & Vinyl Derivatives
Functions:
Surface Finish
Processing Methods:
Spray Lay-up, Hand Lay-up
Features:
Low Blistering, Excellent Surface Finish, Good UV Protection, Thixotropic, Good Bright Luster, UV Protection, Improved Flexibility, Good Surface Finish, Excellent Gloss Retention, Blush Resistant, Good UV Resistance, Excellent Chalk Resistance, Crack Resistant
Our Vinyl Ester Barrier Coat was developed from special thixotropic vinyl ester resins. This coating acts as a barrier coat between the laminate and the gelcoat. This formulation provides superior osmosis resistance along with enhanced thermal and cracking resistance properties. Sogel’s Vinyl Ester Barrier Coats allow accelerating the cure and the demoulding time, while strongly reducing the risk of print through, orange peel and blisters on gelcoat surface.
Hollingsworth & Vose Co.
Hollingsworth & Vose Co. 8000064
Reinforcement Material:
Aramid (Kevlar)
Functions:
Surface Finish
End Uses:
Tanks, Pipe Reinforcement
Hollingsworth & Vose Co. 8000064 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.
Polynt Group
ARMORGUARD® 967 BLACK
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Functions:
Surface Finish
Color:
White
Armorguard® 967 Black have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.
Sika
Biresin® S12
Chemical Family:
Epoxy & Epoxy Derivatives
Functions:
Surface Finish
Processing Methods:
Vacuum Bagging
End Uses:
Tanks
Color:
Grey
Features:
Abrasion Resistance, Abrasion Resistant, Temperature Resistance
Biresin® S12 is a Two component epoxy system, Component A is S12, epoxy resin, filled, gray, Component B is a amine, unfilled, amber.
Polynt Group
Polynt Group 10
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle
AeroWindTech
AeroWindTech AWTPP 106
Chemical Family:
Polyesters
Functions:
Surface Finish
Processing Methods:
Vacuum Bagging, Hand Lay-up
AeroWindTech AWTPP 106 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. The fiber is manufactured from 100% polyester and melts at approximately 480°F (249°C). The fabric leaves a rough surface impression for priming and secondary bonding. It is available in precision slit widths of 60 inches or less.
Polynt Group
POLYCOR® 949 NEUTRAL BASE
Functions:
Surface Finish
Color:
White
Polycor® 949 Neutral Base sanding gel coats have been specifically formulated for use as a sanding substrate. Sanding gel coats are used for FRP parts that will be subsequently painted. They can be used for room temperature and heated molding rtm applications. Customer experiences have proven that these products can be post-baked at temperatures up to 285°f for as long as two hours. They may also be used for utility, noncritical exterior applications. They are not intended Nor should they be used as a surface coat for the marine, tub/shower or swimming pool industries. They should not be used for water immersion service boat hull, swimming pool, spa, water tank, etc. , even if/when painted.
Polynt Group
POLYCOR® NPG Sanitary PA WHITE 9199
Chemical Family:
Diols, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White
Features:
Good UV Protection, UV Protection
Polycor® NPG Sanitary PA White 9199 - high reactivity NPG based gel coat offering high resistance to porosity, chemical stain resistance and very good UV resistance. Available in White and off White shades. It is generally used in mass transports applicatons.
Sogel Inc
Sogel Inc Aquaguard Gel coats
Functions:
Surface Finish
Features:
Crack Resistant, Improved Flexibility, Low Blistering, Chlorine Resistant, Excellent Gloss Retention, Blush Resistant
Sogel Aquaguard Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.
Polynt Group
POLYCOR® 945 TOOLING
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Features:
High Durability
Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.
Schmelzer Industries
Schmelzer Industries TRUMAT 5/8 Ounce
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Mat
Functions:
Surface Finish
End Uses:
Pipes
Processing Methods:
Pultrusion, Filament Winding
Schmelzer Industries TRUMAT 5/8 Ounce is a non-woven, semi-continuous strand glass fiber mat designed for pultrusion and filament winding. Ideal for use in thin wall profiles or for resin rich surface finishes.
Nord Composites
Nord Composites GF 921
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics
Functions:
Surface Finish
End Uses:
Floors
Features:
Easy Film Formation, Thixotropic
Nord Composites GF 921 is a op coat formulated with isophthalic resin, used to make floor coverings with or without the use of corundum as an anti-slip. Thixotropic, pre-accelerated. Gun or robot application. Contains a film-forming agent.
Polynt Group
Polynt Group 23
Functions:
Surface Finish
Color:
Black, Orange, Green
Features:
Flame Retardant
Polynt Group 23 series of gelcoats are formulated specifically for composite mold making. It is formulated with a special base resin that permits an excellent resistance to heat distortion even after repeated use. They provide a high gloss and hard durable surface. These tooling gel coats are formulated ready-to-spray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide or cumene hydro peroxide catalyst. The low opacity formulation help to detect default during spraying process. See section: application in PB-5 polyester tooling because even though manufacturing precautions are used to make tooling gelcoat, a misapplication of these products can produce unacceptable results.
Polynt Group
POLYCOR® 960SW
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White, Blue
Features:
High Strength, Corrosion Resistance, High Durability, Corrosion Resistant
POLYCOR® 960SW Series gel coats are ISO/NPG products formulated for the swimming pool industry. POLYCOR® 960SW Series gel coats meet the EPA National Emission Standards for Hazardous Air Pollutants (NESHAP) for Reinforced Plastic Composites Production - Corrosion Resistant/High Strength or High Performance gel coat. Use of POLYCOR® 960SW gel coat has enabled customers to meet certain requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,IAPMO/ANSI Z124.1 .2-2005,Section 6.1. For swimming pool applications,Polynt recommends that these gel coats be backed by IMEDGE® HPB210 High Performance Barrier Coat,Polynt’s ArmorGuard® vinyl ester barrier coat products,or Polynt’s ArmorStar® VSX vinyl ester skin resins. Use of these materials will create a durable osmotic blister resistant composite that is ideal for swimming pool manufacture. These gel coats are intended and recommended only for the original manufacture of swimming pools; they should not be used for post application (other than patching on the original units). These gel coats are not recommended for the manufacture of spas or saunas. While offering these benefits,these POLYCOR® gel coats have retained the important construction and application qualities expected from Polynt Composites gel coats,such as resistance to tearing and color separation,resistance to porosity,sag resistance,consistent liquid properties,and more. These all add up to higher quality appeal in swimming pools made with Polynt POLYCOR® products.
Hollingsworth & Vose Co.
Hollingsworth & Vose Co. 8000116
Reinforcement Material:
Glass Fibers
Functions:
Surface Finish
End Uses:
Tanks, Pipe Reinforcement
Hollingsworth & Vose Co. 8000116 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.
Polynt Group
IMEDGE® ECT 120 WHITE
Functions:
Surface Finish
Imedge® ECT 120 White - high performance gel coat with excellent cosmetics for deep dark rich colors, excellent blush resistance, high gloss and improved scratch and wear resistance. Main applications areas are aeolian, railway sector etc.
Polynt Group
HIGLOSS TR® 99R BASE WHITE
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
White
Features:
Chemical Resistant, Chemical Resistance, High Durability
Higloss TR® 99R Base White gel coats are high performance products formulated for the reinforced plastics composites industry.
Sika
Biresin® S19
Chemical Family:
Epoxy & Epoxy Derivatives
Functions:
Surface Finish
Processing Methods:
Vacuum Bagging
Color:
Black
Features:
Abrasion Resistance, Abrasion Resistant, Temperature Resistance
Biresin® S19 is a Two component epoxy system, Component A epoxy resin, filled, black, Component B amine, unfilled, amber.
Polynt Group
ARMORCOTE® 966 NEUTRAL BASE
Functions:
Surface Finish
Armorcote® 966 Neutral Base is metallic gel coats are used in passenger, camper, utility, and recreation vehicles, decorative structural components, and for marine vehicle surfaces above the water line Not recommended for water immersion service . Armorcote® 966 series is polynt composites’ best system for weathering resistance in a metallic gel coat armorcote® 966 series meets the EPA national emission standards for hazardous air pollutants NESHAP for both marine manufacturing and reinforced composites production.
Hollingsworth & Vose Co.
Hollingsworth & Vose Co. 8000030
Reinforcement Material:
Carbon Fibers
Functions:
Surface Finish
End Uses:
Tanks, Pipe Reinforcement
Hollingsworth & Vose Co. 8000030 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.
Show
36
of 414 results
Go to page
1
2
3
4
5
6
7
8
9
10