Adhesives

15 products found for Adhesives in Composite Materials
Gurit Sa 130Fr product card banner

Gurit

Gurit SA 130FR

Applications: Advanced Materials, Rail & Mass Transit, Marine

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

SA 130FR is a low temperature curing fire retardant & smoke suppressant epoxy adhesive film. SA 130FR can be cured at temperatures as low as 85ºC / 185ºF, but can also be used for faster manufacture of components through its 45 minute cure at 120ºC / 248ºF . SA 130FR provides a bonding solution for bonding SPX 25225 SPRINT and SA 130FR Prepreg skins to core materials.

Crestamould® B12 product card banner

Scott Bader

Crestamould® B12

Brand: Crestamould

Applications: Tooling & Moldmaking

Product Families: Adhesives

Chemical Family: Polyesters

Crestamould® B12R Sealer is a MEKP catalysed, brushable slightly thixotropic sealer designed to coat expanded and extruded polystyrene foams. This sealer acts as a chemical bridge and barrier between the polystyrene foam and either a laminate or a machinable polyester-based tooling paste such as Crestamould T27/T28. Its main use is for sealing of polystyrene foam blanks used in 5-axis plug and pattern work. It can also be used for architectural and arts applications when it is desirable to use a polyester over the polystyrene foam, replacing traditional latex and epoxy coatings. It is not to be used as a laminating resin

Himax™ 8Gsm product card banner

Hexcel

HiMax™ 8gsm

Brand: HiMax

Applications: Renewable Energy, Rail & Mass Transit, Marine

Product Families: Adhesives

Chemical Family: Polyethylene Terephthalate (PET)

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) products are designed to help composite manufacturers maintain the desired position of the reinforcement prior to resin introduction, particularly in closed mould processes such as vacuum infusion and resin transfer moulding. HiMax™ DPA was developed to provide the optimal level of tack while keeping additional weight to a minimum. Using DPA in conjunction with HiMax™ fabrics allows the user to easily position and re-position the individual layers of their laminate stack before resin is introduced. Conformance to tight radii and complex mould geometry is also aided by DPA.

Shd Composites Vtfa400 product card banner

SHD Composites

SHD Composites VTFA400

Applications: Renewable Energy, Marine, Sports & Recreation

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

VTFA400 (DF034) toughened epoxy adhesive film is design to cure between 65°C and 120°C, allowing flexibility in component manufacture.

Shd Composites Mtfa500 product card banner

SHD Composites

SHD Composites MTFA500

Applications: Sports & Recreation

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

MTFA500 (DF044) toughened epoxy adhesive film is design to cure between 80°C and 120°C, allowing flexibility in component manufacture.

Gurit Sp 9435 product card banner

Gurit

Gurit SP 9435

Applications: Renewable Energy

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

SP 9435 is a single component epoxy system designed to co-cure at moderate elevated temperature with Gurit epoxy prepregs and SPRINTs®. The product is designed to be applied between gelcoat and prepreg, and will bridge any large (up to 20mm) gaps between the two. It is a highly thixotropic, gap filling paste.

Gurit Sa 80 product card banner

Gurit

Gurit SA 80

Applications: Renewable Energy

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

SA 80 adhesive film is a toughened film unsupported or on a glass carrier with excellent tack and drape characteristics. It offers many advantages over traditional wet lay-up techniques for bonding of composite skins to cores, including; consistent bond-line thickness and weight, high strain to failure, high toughness, handling convenience, controlled flow and an 8 week out-life at ambient temperature (18-22ºC/64-72ºF).

Crestafix® F26 Polyester Compound product card banner

Scott Bader

Crestafix® F26 Polyester Compound

Brand: Crestafix

Applications: Tooling & Moldmaking

Product Families: Adhesives

Chemical Family: Polyesters

Crestafix F26R is a water resistant low density polyester-based fairing compound. F26R has good adhesion to cured fibre-reinforced polyester and vinylester laminates. F26R sands easily, gives a hard finish after a full cure, yet it is not brittle and has good impact strength.

Shd Composites Mtfa400 product card banner

SHD Composites

SHD Composites MTFA400

Applications: Sports & Recreation

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

MTFA400 resin film is designed to give enhanced toughness and higher service temperature, giving great flexibility in component manufacture. It is a toughened epoxy resin system that can be supplied with or without fabric support to meet your cost and manufacturing requirements.

Gurit Sp 11100 product card banner

Gurit

Gurit SP 11100

Applications: Renewable Energy

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

This product is a pre-catalysed mono-component paste developed specifically for core splicing activities when using 70°C curing products such as SE70 .prepreg or ST 70 SPRINT™.

Ampro™ Seal Clr product card banner

Gurit

AMPRO™ SEAL CLR

Brand: AMPRO

Applications: Appliances & Electronics, Marine

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

AMPRO™ SEAL CLR is a solvent-free, low viscosity epoxy resin sealer. It has been developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc. AMPRO™SEAL CLR has a low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces. Once AMPRO™ SEAL CLR has soaked into a surface, the adhesive nature of the epoxy base will help to consolidate and strengthen that surface. The resultant epoxy sealing layer provides a high adhesion and moisture resistant base for any type of paint, varnish or epoxy coating system. For example, many woodworking applications combine the penetrating power of the AMPRO™ SEAL, with the thick, clear coating capability of AMPRO™ CLR to produce a strong, highly protective, deep gloss surface on wood. AMPRO™ SEAL CLR can also be used as a viscosity modifier in conjunction with the full AMPRO™ range. AMPRO™ is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. With its fast, low temperature curing hardener and easy 3:1 mix ratio by volume, AMPRO™ provides a quick and convenient way of using one epoxy system for a very wide range of tasks. AMPRO™ has been built on the well-established SP 106 which has been the primary epoxy system for the manufacture and repair of wooden boats for over 20 years

Gurit Sp 4832 product card banner

Gurit

Gurit SP 4832

Applications: Renewable Energy

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

SP 4832 is a highly thixotropic, gap filling paste. It is a single component epoxy system designed to co-cure at moderate elevated temperature with Gurit’s SE prepregs. The product is designed to be either applied between gel coat and prepreg in sharp recesses in order to bridge any large gaps between the two, or used as a highly effective low density core splicing adhesive. The colour is a very dark grey, to tone in with carbon prepregs.

Gurit T-paste 70-2 product card banner

Gurit

Gurit T-Paste 70-2

Applications: Renewable Energy, Rail & Mass Transit, Marine

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

T-Paste 70-2 has been developed to offer significant application improvements over T-Paste 70-1. T-Paste 70-2 has been designed for Marine, Wind Energy and Automotive customers looking for a fast and reliable way to manufacture patterns and direct moulds. T-Paste 70-2 combined with CNC technology allows more design freedom and improves pattern / direct mould accuracy whilst reducing production processes.

Gurit Sa 70 product card banner

Gurit

Gurit SA 70

Applications: Renewable Energy

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

SA 70 adhesive film is a toughened epoxy film on a glass carrier with excellent tack and drape characteristics. It offers many advantages over traditional wet lay-up techniques for bonding of composite skins to cores, including: consistent bond-line thickness and weight, high strain to failure, high toughness, handling convenience, controlled flow and a 4 week outlife at ambient temperature (21°C)

Himax™ 3Gsm product card banner

Hexcel

HiMax™ 3gsm

Brand: HiMax

Applications: Renewable Energy, Rail & Mass Transit, Marine

Product Families: Adhesives

Chemical Family: Polyethylene Terephthalate (PET)

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) products are designed to help composite manufacturers maintain the desired position of the reinforcement prior to resin introduction, particularly in closed mould processes such as vacuum infusion and resin transfer moulding. HiMax™ DPA was developed to provide the optimal level of tack while keeping additional weight to a minimum. The novel application process allows just 3 grams per m2 of adhesive to be applied to the specified fabric. Using DPA in conjunction with HiMax™ fabrics allows the user to easily position and re-position the individual layers of their laminate stack before resin is introduced. Conformance to tight radii and complex mould geometry is also aided by DPA.