Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Knowde
Composite Materials
Surface Finishes
Gelcoats & Topcoats
Products results
338 Products found
Suppliers
Applications
End Uses
Chemical Family
Processing Methods
Color
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Your ChemCo
Composite Materials Surface Finish A
Functions:
Surface Finish
Color:
White, Off White
Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.
Your ChemCo
Composite Materials Surface Finish D
Chemical Family:
Polyesters
Functions:
Surface Finish
Color:
Grey
Features:
Low Smoke Emission, Flame Retardant
Composite Materials Surface Finish D is a pre-accelerated, low-smoke, fire-retardant, polyester-based gelcoat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Composite Materials Surface Finish D forms a foamed, cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard light grey color and is designed to be post-painted. It is formulated to EN45545-2 standard to meet HL2.
Your ChemCo
Composite Materials Surface Finish C
Chemical Family:
Epoxy & Epoxy Derivatives
Functions:
Surface Finish
Processing Methods:
Vacuum Bagging
Color:
Black
Features:
Abrasion Resistant, Temperature Resistance, Abrasion Resistance
Composite Materials Surface Finish C is a Two component epoxy system, Component A epoxy resin, filled, black, Component B amine, unfilled, amber.
Your ChemCo
Composite Materials Surface Finish B
Chemical Family:
Unsaturated Polyester (UPE), Polyesters, Orthophthalics
Functions:
Surface Finish
Processing Methods:
Hand Lay-up
Features:
Chemical Resistant, Excellent Scuff Resistance, Chemical Resistance
Composite Materials Surface Finish B is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.
Scott Bader
Crystic® Polyester Resin 491
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics, Polyesters
Processing Methods:
Pultrusion
Functions:
Surface Finish, Resins, Binders & Matrix Materials
End Uses:
Industrial Containers, Hulls, FRP Boats, Tanks
Features:
Food Contact Acceptable, Thixotropic, Non-Toxic, Water Resistant, Good Toughness, Chemical Resistant, Excellent Toughness
Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.
Scott Bader
Crystic® Brush Gelcoat 69PA
Applications:
Equipment & Parts, Housewares, Pipes & Plumbing
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Polyesters
End Uses:
Pipes, Tanks
Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.
Scott Bader
Crystic® Gelcoat 15E(B)
Applications:
Tooling & Moldmaking, Chemical & Industrial Manufacturing
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Vinyl Esters
Crystic® Gelcoat 15E(B) is a superior-performance, unaccelerated vinyl ester spray or brush-tool gel coat. It is used for making molds that are designed to have a long service life and retain high gloss levels after multiple pulls. This product is easy to spray or brush and achieves good coverage. The gelcoat does not gas, resulting in a very low porosity surface. It cures with a standard MEKP catalyst and has excellent resistance to fiber print-through when used with Crestamould® VE679PA skincoat, Crestamould® RTR4010PA, or Crestamould® 474PA.
Scott Bader
Crystic® Polyester Resin 474PA
Chemical Family:
Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
End Uses:
Tanks
Features:
Dimensional Stability, Thixotropic, Cost Effective, Chemical Resistant, Heat Resistance, High Temperature Strength
Crystic® Polyester Resin 474PA is a pre-accelerated, thixotropic version of Crystic 198. Crystic 474PA is an exceptionally versatile resin suitable for the fabrication of laminates for a wide variety of applications throughout the chemical industry, particularly in environments where resistance to heat and chemicals is required.
Scott Bader
Crystic® Orthophthalic Spray Topcoat 408PA
Applications:
Glazing & Window Elements, Shingles & Tiles, Parking Structures & Stadiums
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Orthophthalics, Unsaturated Polyester (UPE)
End Uses:
Pipes, Tanks
Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.
Scott Bader
Crystic® Spray Gelcoat 92PA
Applications:
Housewares, Interior Fixtures, Building Materials
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Diols, Glycols, Isophthalics
Crystic® Spray Gelcoat 92PA is a chemical resistant spray gelcoat. It is suitable for the manufacture of bathroom products such as sinks, baths, shower trays and water slides and has been used successfully in the industry for many years. It is easy to use and repair.
Scott Bader
Crystic® Polyester Resin 489
Chemical Family:
Polyesters, Unsaturated Polyester (UPE), Isophthalics
Functions:
Resins, Binders & Matrix Materials, Surface Finish
End Uses:
FRP Boats
Features:
High Durability, Low Blistering, Excellent Strength, Good Wet Environment Resistance, Thixotropic
Crystic® Polyester Resin 489 is a thixotropic isophthalic polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for molding boat hulls with outstanding durability and superior blister resistance. The outstanding wetting characteristics of Crystic 489 provide rapid impregnation with freedom from drainage.
Scott Bader
Crystic® Spray Gelcoat 997SMK
Applications:
Housewares
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Diols, Glycols, Isophthalics
Crystic® Spray Gelcoat 997SMK is a pre accelerated Isophtalic Neopenthylglycol, thixotropic and water clear polyester gelcoat specially designed to be used by airless spray equipment. It has been specially designed for the production of a transparent film on sanitary items, mainly sinks and vanity units, when excellent resistance to thermal chock is a key property.
Scott Bader
Crystic® Orthophthalic Topcoat 407PA
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Building Materials
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Orthophthalics, Unsaturated Polyester (UPE)
Crystic® Orthophthalic Topcoat 407PA White is a pre-accelerated Flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. This product is pigmented using a highly UV resistant grade of titanium dioxide. It has been formulated for brush application.
Scott Bader
Crystic® Brush Topcoat 506PA
Applications:
Marine, Marine Coatings, Concrete Coatings & Stains
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Brush Topcoat 506PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by roller or brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.
Scott Bader
Crystic® Primecoat
Applications:
Tooling & Moldmaking, Chemical & Industrial Manufacturing
Product Families:
Gelcoats & Topcoats, Other Surface Finishes, Surface Finishes
Chemical Family:
Polyesters
Crystic® Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc. It can be applied wet-on-wet up to a thickness of 1.5mm in one operation without sagging or draining from vertical surfaces. The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications.
Scott Bader
Crystic® Fireguard Gelcoat 72PAX
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.
Scott Bader
Crestamould® Gelcoat 11PAS
Functions:
Surface Finish
Features:
Thixotropic, Good Mechanical Properties, Excellent Surface Hardness, Heat Resistance, Glossy Surface Aspects, Excellent Gloss Retention
Crestamould® Gelcoat 11PAS is an iso-NPG polyester gelcoat, thixotropic and pre-accelerated, specially designed to be spray applied. Crestamould® Gelcoat 11PAS has been specially formulated for mold making. It is pre-accelerated and only requires the addition of the catalyst to start its curing reaction.
Scott Bader
Crystic® Polyester Resin 124PA
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics, Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
End Uses:
FRP Boats, Tanks, Shower Trays, Tubs
Features:
Thixotropic, Water Resistant, Excellent Wetting Behaviour, Medium Viscosity
Crystic® Polyester Resin 124PA is a medium-thixotropic, tropicalized, pre-accelerated, waxed unsaturated polyester resin. It is designed for rapid wetting and impregnation of reinforcements, making it ideal for building boats, water tanks, bath tubs, shower trays, and other products that require water resistance. The unwaxed version of this resin is also available.
Scott Bader
Crestafire® P1-3001PA
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters
Processing Methods:
Hand Lay-up, Vacuum Infusion Processing (VIP), Resin Transfer Molding (RTM)
Crestafire® P1-3001PA is a filled, pre-accelerated, fire retardant unsaturated polyester resin. It incorporates a selected grade of alumina trihydrate (ATH) which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. It is halogen-free and does not contain heavy metals.
Scott Bader
Crystic® Fireguard Gelcoat 72PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.
Scott Bader
Crystic® Very-Low Styrene Ecogel S3PA
Applications:
Marine, Transportation
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Very-Low Styrene Ecogel S3PA is a high performance isophthalic neopentyl glycol gelcoat. This gelcoat is pre-accelerated and formulated for spray application. Crystic Ecogel® S3PA is a low VOC product. Crystic Ecogel® S3PA has been specially designed for the production of high quality parts in the marine industry. This formulation offers an excellent hydrolysis resistance combined with a high gloss and gloss retention. Crystic Ecogel® S3PA has approval by the Lloyd’s Register of Shipping.
Scott Bader
Crystic® Fireguard Gelcoat 70PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.
Scott Bader
Crestamould® Gelcoat 15PA (B)
Chemical Family:
Vinyl Esters
Functions:
Surface Finish
Features:
Excellent Surface Finish, Low Film Porosity, High Impact Resistance, Heat Resistance, Chemical Resistance, Low Porosity, High Gloss, Great Surface Appearance, Good Surface Finish, Excellent Gloss Retention, Low Outgassing, Chemical Resistant, Good Surface Appearance, Service Life Extension, High Performance, Flame Retardant
Crestamould® Gelcoat 15PA (B) is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and has been developed to have excellent gloss retention alongside impact, heat and chemical resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. Crestamould® Gelcoat 15PA (B) is recommended for use in the manufacture of high quality FRP composite tooling.
Scott Bader
Crystic® Spray Gelcoat 976SMK
Applications:
Pools & Landscaping, Concrete Coatings & Stains, Building Materials
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Polyesters
Crystic® Spray Gelcoat 976SMK is a chemical resistant, thixotropic and pre-accelerated Iso - NPG gelcoat, designed for the manufacture of swimming pools. It will provide high chemical and hydrolysis resistance. This gelcoat is to be applied by spray with airless machine.
Scott Bader
Crystic® Orthophthalic Topcoat 402PA
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Building Materials
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Orthophthalics, Unsaturated Polyester (UPE)
Crystic® Orthophthalic Topcoat 402PA is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.
Scott Bader
Crystic® Transfer Moulding Resin 1142PA
Chemical Family:
Polyesters
Processing Methods:
Resin Transfer Molding (RTM)
Functions:
Surface Finish
Features:
Good Toughness, Durable
Crystic® Transfer Molding Resin 1142PA is based on a tough, durable orthophthalic unsaturated polyester resin, 1141. It is designed for use in resin transfer molding (RTM) and may also be used in other resin injection or vacuum-assisted techniques. The variant has a shorter gel time, making it ideal for achieving shorter process times.
Scott Bader
Crestafire® P1-2002PA
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters
Processing Methods:
Spray Lay-up, Hand Lay-up
Crestafire® P1-2002PA is a pre-accelerated thixotropic polyester resin with fire retardant properties, making it suitable for applications where fire resistance is a consideration. The product is suitable for spray and hand lamination application techniques. It requires only the addition of a catalyst to start the curing reaction.
Scott Bader
Crystic® Spray Gelcoat Stonecast 95PA
Applications:
Housewares
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Diols, Glycols, Isophthalics
Crystic® Spray Gelcoat Stonecast 95PA is a pre-accelerated Gelcoat based on a high clarity, low color isophthalic/neopentyl glycol resin. It has been specially formulated to accept poly stone colored chips and be able to be spray applied by the different dry and wet spray methods available.
Scott Bader
Crystic® Brush Topcoat 507PA
Applications:
Marine, Architectural Coatings, Concrete Coatings & Stains
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Brush Topcoat 507PA is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.
Scott Bader
Crystic® Spray Gelcoat LS 30PA
Applications:
Commercial, Rail & Mass Transit, Architectural Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Polyesters
Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.
Scott Bader
Crystic® Isophthalic Brush Topcoat 65PAX
Applications:
Marine, Rail & Mass Transit, Architectural Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.
Scott Bader
Crystic® Isophthalic Spray Gelcoat GT-1000
Applications:
Marine, Rail & Mass Transit, Architectural Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Isophthalics, Polyesters
Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.
Scott Bader
Crystic® Glosscoat
Applications:
Tooling & Moldmaking, Chemical & Industrial Manufacturing
Product Families:
Gelcoats & Topcoats, Other Surface Finishes, Surface Finishes
Chemical Family:
Polyesters
Crystic® Glosscoat is a polyester coating designed to be applied over prepared crystic primecoat to give a glossier and more durable surface. The material hardens rapidly and can be easily sanded to a smooth surface which can be polished to high gloss. It is designed for spray application using gravity fed, siphon or pressure pot systems.
Scott Bader
Crestafire® P1-3002PA
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters
Processing Methods:
Vacuum Assisted Resin Transfer Molding (VARTM), Resin Transfer Molding (RTM)
Crestafire® P1-3002PA is a pre-accelerated polyester resin with fire retardant properties, which make it suitable for applications where fire resistance is a major consideration. It is suitable for RTM (resin transfer molding) and RTM light applications. It requires only the addition of a catalyst to start the curing reaction.
Scott Bader
Crystic® Transfer Moulding Resin 785PALR
Chemical Family:
Polyesters
Processing Methods:
Resin Transfer Molding (RTM)
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Features:
Good Surface Finish
Crystic® Transfer Molding Resin 785PALR is a pre-accelerated, DCPD-based polyester resin specifically designed for use in the resin transfer molding (RTM) applications. It is recommended for use when longer gel times are required, and Butanox M50 is the recommended catalyst.
Scott Bader
Crystic® Gelcoat 12PA
Applications:
Tooling & Moldmaking, Chemical & Industrial Manufacturing
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Polyesters
Crystic® Gelcoat 12PA is a pre-accelerated iso-NPG gel coat formulated for brush application. It has good heat and chemical resistance, making it suitable for preparing molds. This product is recommended for use in the production of sanitaryware and tooling products.
Show
36
of 338 results
Go to page
1
2
3
4
5
6
7
8
9
10