Other Surface Finishes

11 products found for Other Surface Finishes in Composite Materials
Sprint™ Sf 95Vh product card banner

Gurit

SPRINT™ SF 95VH

Brand: SPRINT

Applications: Aerospace & Aviation

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

SF 95VH surfacing material is a very hard, abrasion-resistant, grey filled epoxy film. It is designed to protect vulnerable underbody components from damage caused by foreign objects. Typical applications include inner wings and front wheel diffusers. SF 95VH can be used directly against a suitably release treated mould surface, with prepreg or SPRINT ™ plies laid up behind it, or as a final layer in the mould. It can be cured with vacuum only processing. Due to abrasion-resistance of this material, it would not be usual to apply a paint finish. The epoxy system is supplied ready impregnated into a supporting medium and ready catalysed, requiring only a moderate temperature cure.

Sprint™ Sf 70 product card banner

Gurit

SPRINT™ SF 70

Brand: SPRINT

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

SF 70 surfacing material is a light green toughened, epoxy film designed to enhance the surface finish of moulded composite components. It allows a good surface finish to be obtained by vacuum-bag moulding processes. It can be used directly against a suitably release treated mould surface, with prepreg or SPRINT™ plies laid up behind it. When fully cured with SPRINT™ or prepreg, SF 70 forms a stable tough surface which can be sanded in preparation for painting. The epoxy system is supplied ready impregnated into a supporting medium and ready catalysed, requiring only a moderate temperature cure. SF 70 surfacing material is currently available in 150g film weight. It is supplied in roll lengths of 50lm.

Toray Microply™ Tc235sf-1 product card banner

Toray

Toray MicroPly™ TC235SF-1

Brand: Toray MicroPly

Applications: Aerospace & Aviation

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

Toray Microply™ TC235SF-1 is a composite surfacing film designed to provide paintable composite surfaces off of the tool. It may be cured under vacuum-only pressure or under low autoclave pressure. The surfacing properties of Toray MicroPly™ TC235SF-1 allow smooth, paintable surfaces, even with thin-skinned honeycomb-stiffened composite structure. Epoxy Surfacing System 121°C–177°F (250°F–350°F)

Sprint™ Sf 80 product card banner

Gurit

SPRINT™ SF 80

Brand: SPRINT

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

SF 80 surfacing material is a light green or black toughened, epoxy film designed to enhance the surface finish of moulded composite components. It allows a good surface finish to be obtained by vacuum-bag moulding processes. It can be used directly against a suitably release treated mould surface, with prepreg or SPRINT™ plies laid up behind it. When fully cured with SPRINT™ or prepreg, SF 80 forms a stable tough surface which can be sanded in preparation for painting. The epoxy system is supplied ready impregnated into a supporting medium and ready catalysed, requiring only a moderate temperature cure. SF 80 surfacing material is currently available in 150g film weight.

Gurit Sf 80Frobl product card banner

Gurit

Gurit SF 80FROBL

Applications: Pavement, Highways, Roads & Bridges, Structural Components

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

SF 80FROBL surfacing material is a Fire Retardant Obliterated Black (FROBL) filled epoxy film. It provides an effective fire retarding layer capable of withstanding exposure to fire, while preventing the epoxy substrate from combustion. Typical applications include protection of structural components in high risk areas such as engine bays, exhaust runs, and around the fuel system. SF 80FROBL can be used directly against a suitably release treated mould surface, with prepreg or SPRINT™ plies laid up behind it, or as a final layer in the mould. The product is sufficiently tacky to aid placement into vertical surfaces of a mould. SF 80FROBL can be cured with vacuum only processing. The epoxy system is supplied ready impregnated into a supporting medium and ready catalysed, requiring only a moderate temperature cure. SF 80FROBL surfacing material is available in a range of formats;

Crystic® Glosscoat product card banner

Scott Bader

Crystic® Glosscoat

Brand: Crystic

Applications: Tooling & Moldmaking

Product Families: Other Surface Finishes

Chemical Family: Polyesters

Glosscoat is a polyester coating designed to be applied over prepared Primecoat to give a glossier and more durable surface. The material hardens rapidly and can be easily sanded to a smooth surface which can be polished to high gloss. Glosscoat can be mixed with Primecoat to improve the surface gloss and gloss retention of Primecoat. Mixing 1 part of Glosscoat to 1 part of Primecoat will give a significant improvement in gloss. Higher proportions of Glosscoat to Primecoat will further improve the gloss. For optimum levels of gloss, Glosscoat can be used on its own, as described below.

Sprint™ Sf 96 product card banner

Gurit

SPRINT™ SF 96

Brand: SPRINT

Applications: Renewable Energy, Power & Utilities, Refining & Gas Processing

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

The patented SF 96 surfacing material is a grey filled, sand-able epoxy film designed to enhance the surface finish of moulded composite components. It allows a paintable surface finish to be obtained by vacuum-bag moulding processes. It can be used directly against a suitably release treated mould surface, with prepreg or SPRINT™ plies laid up behind it. When fully cured with SPRINT™ or prepreg, SF 96 forms a stable sand-able surface which, once lightly sanded to provide a key for painting, greatly reduces print through of the underlying laminate. The epoxy system is supplied ready impregnated into a supporting medium and ready catalysed, requiring only a moderate temperature cure.

Crystic® Primecoat product card banner

Scott Bader

Crystic® Primecoat

Brand: Crystic

Applications: Tooling & Moldmaking

Product Families: Other Surface Finishes

Chemical Family: Polyesters

Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc. It can be applied wet-on-wet up to a thickness of 1.5mm in one operation without sagging or draining from vertical surfaces. The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications. Where higher gloss and/ or hardness is required, it can be surfaced with Glosscoat (see separate Glosscoat data sheet).

Park Electrochemical Aeroglide product card banner

Park Electrochemical

Park Electrochemical Aeroglide

Applications: Aerospace & Aviation

Product Families: Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

Aeroglide is an epoxy-based composite surfacing film with fiberglass reinforcement designed to improve the surface finish of aircraft composite parts and reduce or eliminate secondary surface finishing operations prior to painting.

Park Electrochemical E-765 product card banner

Park Electrochemical

Park Electrochemical E-765

Applications: Renewable Energy, Interior, Aerospace & Aviation

Product Families: Thermoset Prepregs, Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

End Uses: Fuselage, Nacelles, Fairings

E-765 is medium-toughened, self-adhesive epoxy with fiberglass, carbon, Spectra®, and quartz (including Astroquartz) reinforcement for aerospace structures. Wide processing window. Wet service temperature up to 180°F.

Park Electrochemical E-766b product card banner

Park Electrochemical

Park Electrochemical E-766B

Applications: Renewable Energy, Aerospace & Aviation, Interior

Product Families: Thermoset Prepregs, Other Surface Finishes

Chemical Family: Epoxy & Epoxy Derivatives

End Uses: Fuselage, Nacelles, Fairings

E-766B is medium-toughened, low-tack epoxy with fiberglass, carbon, and aramid (including Kevlar®) reinforcement. Self-adhesive prepreg for sandwich applications. Flame retardant. Controlled flow properties. Service temperature up to 160°F.