Elastomers

11,777 products found in Elastomers
Product Families
Thermoplastic Elastomers
Elastomer Additives
Specialty Elastomers
Parts & Shapes
Thermoset Elastomers
With TDS
Hide Blends
With SDS
Kalrez® 4079 product card banner

DuPont

Kalrez® 4079

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings

Features: Good Mechanical Properties, High Temperature Resistance, Heat Aging Resistant, Low Compression Set, Good Thermal Stability, Chemical Resistant, General Purpose

End Uses: Semiconductor Applications, Pump Parts, Aircraft Applications

Color: Black

Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.

Kalrez® Spectrum™ 6375 product card banner

DuPont

Kalrez® Spectrum™ 6375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant

End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump

Color: Black

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

Esprene™ Epdm 512f product card banner

Sumitomo Chemical

Esprene™ EPDM 512F

Polymer Name: Ethylene Propylene Diene Terpolymer (EPDM)

ESPRENE EPDM 512F is an Ethylene Propylene Diene Terpolymer (EPDM) material. It is available in Asia Pacific.

Nipol® Ir 2200 product card banner

ZEON Corporation

Nipol® IR 2200

Polymer Name: Polyisoprene (IR)

Processing Methods: Extrusion, Injection Molding

Additives Included: Antioxidant

End Uses: Conveyor Parts, Footwear, Tires, Belts/Belt Repair

Features: Anti-Oxidant

Nipol IR is a polyisoprene rubber with high cis-1,4 using Ziegler catalyst. Nipol IR is known for its molecular structure and properties that are nearly identical to natural rubber. Nipol IR features extremely stable quality and is widely used in diverse industrial products, such as tires and belts, as a synthetic rubber alternative in place of natural rubber.UsesAuto tires, bicycles tires, aircraft tires, camelback, conveyor belts, V-belt, packings, seals, footwears, rubber thread, coated fabrics, and other extruded and molded mechanical goods. Nipol IR-2200 can be blended with other rubbers such as NR, SBR and BR, etc., and is applicable to transparent and light color products.

Kalrez® Spectrum™ 7075 product card banner

DuPont

Kalrez® Spectrum™ 7075

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant

End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts

Color: Black

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

Esprene™ Epdm 600f product card banner

Sumitomo Chemical

Esprene™ EPDM 600F

Polymer Name: Ethylene Propylene Diene Terpolymer (EPDM)

ESPRENE EPDM 600F is an Ethylene Propylene Diene Terpolymer (EPDM) material. It is available in Asia Pacific.

Advanced Composites Adx-5023 product card banner

Advanced Composites

Advanced Composites ADX-5023

Polymer Name: Thermoplastic Polyolefin (TPO)

Processing Methods: Injection Molding

Features: High Stiffness, Good Scratch Resistance, UV Stabilized, Excellent Low Temperature Ductility, High Impact Resistance, Impact Modified

Density: 1030.0 - 1030.0 kg/m³

Flexural Modulus: 1900.0 - 1900.0 MPa

ADX-5023 is a mineral filled thermoplastic olefin compound designed for an excellent balance of stiffness and impact. It is UV-stable, scratch resistant, ductile at cold temperatures, and suitable for mold- in-color interior applications.

Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Lg™ Sbs Lg-411 product card banner

LG Chem

LG™ SBS LG-411

Polymer Name: Styrene Butadiene Styrene (SBS)

Processing Methods: Injection Molding, Calendering, Extrusion

DescriptionRadial structure, Non-Oil Extended Grade Thermoplastic ElastomerApplicationAsphalt Modifier, Plastic Modifier, Compounding, Adhesives etc

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Nipol® Br 1220 product card banner

ZEON Corporation

Nipol® BR 1220

Polymer Name: Polybutadiene Rubber (BR)

Processing Methods: Extrusion, Injection Molding

Additives Included: Antioxidant

End Uses: Conveyor Parts, Footwear, Tires, Belts/Belt Repair

Features: Low Temperature Resistant, Anti-Oxidant, Abrasion Resistant

Nipol BR affords excellent abrasion resistance, low temperature resistance, and heating characteristics, as well as high rebound resilience. There are two types of Nipol BR-high cis-BR and low cis-BR-with different levels of cis-1,4 content, which can be selected according to the specific application. When combined with other rubbers, such as natural rubber, SBR, and NBR, Nipol BR provides and improves low-temperature performance and other characteristics, the inherent features of Nipol BR, while maintaining each rubber's unique properties. Nipol BR is widely used and has proved satisfactory in a variety of manufacturing processes for such products as tires, footwear, vibration-insulating rubber, and high impact polystyrene.UsesAuto tires, bicycle tires, aircraft tires, tire treads, camelback, conveyor belts, V-belt, packings, seals, footwear, coated fabrics, molded and extruded mechanical goods.

Multiflex® G 60 A 11 Bt 13893 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 23.0 - 23.0 kN/m

Strain at Break: 650.0 - 650.0 %

Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion

Nusil™ Cv-1142 product card banner

NuSil Technology

NuSil™ CV-1142

Polymer Name: Silicone Elastomer

End Uses: Aerospace Applications

Features: Low Outgassing

NuSil™ CV-1142 is a non-corrosive controlled volatility RTV silicone adhesive/sealant.

Kalrez® 9100 product card banner

DuPont

Kalrez® 9100

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Good Elastic Recovery, Low Outgassing, Low Metal Content, Good Mechanical Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Amber

Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.

Esprene™ Epdm 501a product card banner

Sumitomo Chemical

Esprene™ EPDM 501A

Polymer Name: Ethylene Propylene Diene Terpolymer (EPDM)

ESPRENE EPDM 501A is an Ethylene Propylene Diene Terpolymer (EPDM) material. It is available in Asia Pacific.

Esprene™ Epdm 505 product card banner

Sumitomo Chemical

Esprene™ EPDM 505

Polymer Name: Ethylene Propylene Diene Terpolymer (EPDM)

ESPRENE EPDM 505 is an Ethylene Propylene Diene Terpolymer (EPDM) material. It is available in Asia Pacific.

Advanced Composites Adx-5017 product card banner

Advanced Composites

Advanced Composites ADX-5017

Polymer Name: Thermoplastic Polyolefin (TPO)

Processing Methods: Injection Molding

Features: High Stiffness, Good Scratch Resistance, UV Stabilized, High Impact Performance, Excellent Low Temperature Ductility, High Flow, Impact Modified

Density: 1040.0 - 1040.0 kg/m³

Flexural Modulus: 2000.0 - 2000.0 MPa

ADX-5017 is a mineral filled thermoplastic olefin compound designed for a balance of stiffness and impact. It is high flow, UV-stable*, scratch resistant, and suitable for mold-in-color interior applications.

Chemraz™ Xrz product card banner

Greene Tweed

Chemraz™ XRZ

Polymer Name: Perfluoroelastomer (FFKM)

Features: High Purity, Low Compression Set

Chemraz XRZ is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XRZ include engineering/industrial parts and sealing applications. Primary characteristic: high purity.

Nusil™ Med-6670 product card banner

NuSil Technology

NuSil™ MED-6670

Polymer Name: Silicone Elastomer

Processing Methods: Dip Coating, Spray Lay-Up

End Uses: Medical/Healthcare Applications

Features: Low Friction, Low Viscosity

NuSil™ MED-6670 is a low coefficient of friction silicone coating.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Kraton™ Fg1901 G product card banner

Kraton

Kraton™ FG1901 G

Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)

Chemical Family: Styrenic Block Copolymers, Styrenics, Styrene Copolymers

Additives Included: Impact Modifier

Processing Methods: Compounding

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Moldwiz® Int-1e-11s product card banner

Axel

MoldWiz® INT-1E-11S

Function: Processing Aid, Release Agent

Chemical Family: Chemical Mixtures & Blends

Labeling Claims: Other Labeling Claims, Silicone-free, Wax-free

MoldWiz® INT-1E-11S - A process aid additive with surfactant properties which is added directly to the aqueous solution. The addition of this process aid additive gives the resin improved wetting properties of the paper or substrate being impregnated, reducing or eliminating voids and dry spots. The process aid additive will not interfere with adhesion properties between paper laminates. It will function as an excellent release agent causing the laminate to release easily and cleanly from the caul plate without leaving any residue. This product contains no silicone, no wax and no metallic stearates.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Solprene® 1205 product card banner

Dynasol Elastomers

Solprene® 1205

Polymer Name: Solution Styrene Butadiene Rubber (SSBR)

Function: Binder, Processing Aid

Chemical Family: Styrene-Butadiene Copolymer

Additives Included: Antioxidant

Labeling Claims: Other Labeling Claims, Food Contact Acceptable

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

Paracril™ 3350 product card banner

Dynasol Elastomers

Paracril™ 3350

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

End Uses: O Rings, Footwear, Hoses, Automotive Applications

Features: Low Temperature Flexibility, Oil Resistant, Good Processability, Fast Curing

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Lucene™ Lc170 product card banner

LG Chem

Lucene™ LC170

Polymer Name: Thermoplastic Polyolefin (TPO)

Features: Impact Resistance, Good Flexibility, Good Toughness

LUCENE LC170 is an ethylene-octene copolymer produced using LG Chem's metallocene polymerization catalyst and solution process technology.This resin is an excellent impact modifier for plastics and offers unique performance capabilities for compounded products.Applications General purpose thermoplastic elastomers, Polymer modification Performance Improved impact strength in polypropylene Excellent filler acceptance Available as pellet form Outstanding toughness with flexible performance Reduction of product weight

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Nipol® Lx551 product card banner

ZEON Corporation

Nipol® LX551

Polymer Name: NBR Latex

Features: Oil Resistant

Latex of acrylonitrile butadiene copolymer (NBR latex)CharacteristicsMedium-high nitrile. Oilproof gloves. More oil-proof and stronger than LX550.

Waradur® E product card banner

Voelpker Spezialprodukte GmbH

WARADUR® E

Function: Mold Release Agent, Glossing Agent, Stabilizer, Dispersant, Melt Flow Agent, Dispersant & Wetting Agent, Emulsifier, Emulsion Stabilizer, Release Agent, Gloss Enhancer, Opacifier

Chemical Family: Waxes, Esters, Fatty Acids

Labeling Claims: Food Contact Acceptable, Non-Carcinogenic, Reprotoxic substance-free, Non-Mutagenic, Environmentally Friendly

Compatible Polymers & Resins: Polyamides, Polyethylene Terephthalate (PET), Thermoplastic Elastomers (TPE), Polypropylenes (PP), Polybutylene Terephthalate (PBT), Phenolic Resins, Polyvinyl Chloride (PVC), Polylactic Acid (PLA), Styrene Copolymers, Polyurethanes (PU), Epoxies (EP), Thermoplastic Polyurethane (TPU)

WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding esters exhibit chain length in the range of C58 – C66 and provide this wax with a low volatility, good thermostability and low migration rates.

Lg™ Sbs Lg-501 product card banner

LG Chem

LG™ SBS LG-501

Polymer Name: Styrene Butadiene Styrene (SBS)

Processing Methods: Injection Molding, Calendering, Extrusion

DescriptionLinear structure, Non-Oil Extended Grade Thermoplastic ElastomerApplicationAsphalt Modifier, Plastic Modifier, Compounding, Adhesives etc

Nusil™ Med-1137 product card banner

NuSil Technology

NuSil™ MED-1137

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications

Features: Thixotropic, Moisture Resistant, Biocompatible, Chemical Resistant

NuSil™ NuSil™ MED-1137 is a RTV silicone adhesive.

Kraton™ G1726 M product card banner

Kraton

Kraton™ G1726 M

Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)

Processing Methods: Compounding

Additives Included: Antioxidant

Kraton G1726 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1726 MS - is supplied as a dusted, dense pellet. Kraton G1726 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Esprene™ Epdm 601f product card banner

Sumitomo Chemical

Esprene™ EPDM 601F

Polymer Name: Ethylene Propylene Diene Terpolymer (EPDM)

ESPRENE EPDM 601F is an Ethylene Propylene Diene Terpolymer (EPDM) material. It is available in Asia Pacific.

Nusil™ Med1-4013 product card banner

NuSil Technology

NuSil™ MED1-4013

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications

Features: Moisture Resistant, Room Temperature Vulcanizing, Biocompatible, Chemical Resistant, Fast Curing

NuSil™ MED1-4013 is a fast-cure silicone adhesive.

Kraton™ G1701 M product card banner

Kraton

Kraton™ G1701 M

Polymer Name: Styrene Ethylene Propylene Styrene (SEPS)

Processing Methods: Compounding

Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below. Kraton G1701 MU - supplied as a powder. Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.