Brands results

THEMOPLASTIC COMPOUNDS BASED ON PP AND DYNAMICALLY VULCANIZED EPDM Taroplast trade name for thermoplastic compounds based on PP-EPDM. The EPDM elastomeric portion is dynamically vulcanized during production process.Taroprene is therefore classied as TPV: Thermoplastic Vulcanizate.• Produced in spherical granules to facilitate rolling and hopper feeding.• Typical supply packaging is in 25 kg bags. Big bags or octabins available on request

KIBITON® is a copolymer of styrene and butadiene. It shows some of the characteristics of thermoset rubber such as elasticity and low temperature performance with the advantages of a thermoplastic such as melt processibility. Its segmented and radial molecular structure allows it to have the same flexible and physical properties of general rubber without the vulcanization process. Its middle segment is similar to rubber and has excellent elastic restoring force, processing flowability, weather resistance, and can be injection molded similar to that of thermoplastics. It can be widely applied for shoe soles, toys, asphalt modifications, mechanical products, plastic modification agents, and adhesive agents.

Various innoprene products supplied by Kumho Polychem Co.,Ltd. are thermoplastic elastomers of polyolefin type, and they can replace the existing thermosetting products of EP(D)M or CR rubber. The material is also able to replace soft PVC that is recently being discussed for its environmental problems. Moreover, the material is of low weight, therefore it is possible to develop light-weighted products. Innoprene is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing. Innoprene is possible to mold using devices of extrusion molding, injection molding, blow molding and calendar processing as in normal plastic resin. Especially, it is among the new materials that are possible to apply in extrusion area. (automobile glass run channel and construction window gasket etc)

AWP TPE-S Elastex is the trade name of our Thermoplastic Elastomers. The Elastex qualities combine the rubber-elastic behavior of a rubber and a thermoplastic processing behavior. Elastex is manufactured on the basis of SBS or SEBS. Depending on requirements, the Elastex grades are available modified, including the following optimizations: UV stabilized, heat aging stabilized, slip and demoulding aids, adhesion-modified or vibration and impact absorbing.

"Vinoprene is a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends. Certain grades of NBR and PVC are highly compatible at any blending ratio. The blend partners retain their critical individual properties while improving their overall properties synergestically. Vulcanizates based on NBR/PVC blends possesses excellent ozone resistance, fuel resistance and abrasion resistance while maintaining excellent extrusion characteristics."

Our TPE series is highly adaptable and can be utilized to a customer’s advantage in a variety of applications. The compounds are not only easy to process but are ideal for injection molding. Optimized developments and endless formulations have been created by our leading team of experts to fulfill the requirements of applications to ensure the most optimal finished product. Also part of this series, is our EcoMax® line of recycled TPE and ElastoFlo® our premier line SEBS. Key Properties of our ElastoFlex® include: Unfilled, semi-filled & filled series, 30-90 Shore A hardness, Translucent, black, natural or colored compounds are available, Offers adhesion to PP & PE, High Flexibility, Ideal mechanical properties, food contact applications possible with FDA approval, 100% Recyclable.

KOPEL® is a thermoplastic polyester elastomer, which is a new engineering thermoplastic elastomer combining the properties of conventional rubber and thermoplastic. Its flexibility and elastic recovery are very similar to rubber, but its processability is much superior to rubber. While its flexibility and elastic recovery are similar to rubber, its mechanical properties, heat resistance, weather resistance and UV stability are far better than the performance of conventional rubber.

PharMed® BPT tubing has been formulated to withstand the rigors of peristaltic pumping action while providing the biocompatible fluid surface required in sensitive bioprocess applications. With its superior flex life characteristics, PharMed BPT tubing simplifies biopharmaceutical manufacturing processes by reducing production downtime due to pump tubing failure. The excellent wear properties of PharMed BPT tubing also can lead to reduced erosion of the tubing interior walls, improving the overall efficiency of filtering systems.

For resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability)

Cellular Vulkollan® is characterized by excellent properties such as high resilience, large volume compressibility, high restoring force, good abrasion resistance even under continuous load, aging and weather resistance, resistance to oil, grease, petrol, ozone, nitrogen.

Alpha Engineered Composites FluoroSeal fluoroelastomer sheet packing is especially recommended for fabrication into gaskets, seals, packings, washers, pads, shims, curtains, joints and other parts for use where severe operating conditions prevail

"Maven copolyesters have been specifically developed for the extrusion of heavy gage sheets, allowing high thicknesses without crystallization occurring. Maven grades are the solution when a combination of exceptional clarity, surface gloss and remarkable toughness are essential. The Maven products range covers a variety of specific customer requirements, offering neutral edge color and maximum impact resistance. Thanks to their inherent toughness, sheets produced from Maven grades may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Maven co-polyesters include a wide range of grades, offering a selection of products that can fulfill your specific needs adjusting to final product specification. Sheets made with Maven may be easily thermoformed, cold-bent, drilled, sawed, screwed, routed and personalized through different methods of decoration and embossing, such as colors and frosty designs. UV stabilization is also possible through coextrusion of a thin layer of masterbatch.

ProFlex™ is a comprehensive range of medical grade Styrene Ethylene Butylene Styrene (SEBS) Thermoplastic Elastomers (TPEs) manufactured by Foster Corporation. These unique polymers offer excellent elastomeric properties, with superior design flexibility and ease of processing via injection molding and extrusion.

Elastron TPO (thermoplastic polyolefin) is a brand name of the family which consists of Polypropylene (PP) and EPDM/EPR which shows rubber like properties and can be processed conventional thermoplastic method. (Such as extrusion, injection and blow molding)

SOLPLAST® is a range of thermoplastic elastomer compounds based on styrene block copolymers such as SBS, SEBS and SEEPS, a so-called TPE-S product. These compounds have rubber-like properties, yet flow like thermoplastics when exposed to heat and pressure. TPE-S based products are characterized by low compression set and good resistance to various media. Special types with adhesion properties to various thermoplastics complement the portfolio.

ECO-FLEX RTPV, a recycled rubber based TPV, combines the performance characteristics of rubber, such as flexibility and anti-skid, with the processing ease of conventional thermoplastic materials. ECO-FLEX RTPV grades have replaced thermoset rubber in automotive applications such radiator air deflectors, gas tank strap pads and splash shields at several OEMs including Ford, GM and Chrysler.

Elastron D is a brand name of styrene-butadiene-styrene (SBS) block copolymers that behaves like rubber properties under room temperature and has advantage of easy processing. Generally, Elastron SBS products are suitable for indoor applications because they do not resist to UV and heat. These materials are especially preferred for hand tools, home appliances and mechanical parts.