Products results

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

INFINAM® Phower RG 7100L is a liquid photopolymer formulation in a striking black color. This 1-part system is known for its ease of processing. When fully cured, it boasts impressive mechanical properties, particularly high impact strength, making it a top choice for a wide range of applications.

INFINAM® Phippo TI 5400L is a high-performance white liquid photopolymer resin designed for simplicity and outstanding mechanical characteristics. This 1-part system offers ease of processing, while its fully cured state showcases exceptional mechanical properties, including remarkable toughness and ductility.

INFINAM® ST 6100 L is a black-colored liquid photopolymer formulation known for its ease of processing, low viscosity, and one-part system. When fully cured, this material demonstrates excellent mechanical properties, including high strength and elongation, along with resistance to high temperatures.

INFINAM® RG 3101 L is a black-colored liquid photopolymer formulation known for its ease of processing, low viscosity, and one-part system. When fully cured, this material showcases impressive mechanical and thermal properties, including high impact strength and resistance to high temperatures.

INFINAM® RG 2000 L is a clear liquid photopolymer formulation known for its fast-curing properties and ease of processing. It is a one-part system, and when fully cured, it demonstrates outstanding mechanical properties, including high toughness, and has low water absorption characteristics.

SABIC's Specialties Business LNP THERMOCOMP DF004XXAR1 compound is based on Polycarbonate (PC) resin containing 20% glass fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Strength, Higher Temperature Performance and Higher Throughput compared to ABS and PPE, as well as Excellent Ductility and Smooth Surface Finish. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ AM Compound AF004XXAR1 is a top-quality material based on acrylonitrile butadiene styrene (ABS) resin containing 20% glass fiber specifically designed for large format additive manufacturing (LFAM) applications. This grade is easy to process, has low warp, and provides excellent print surface quality, making it an ideal candidate for a broad range of applications and tooling, including thermoforming and vacuum forming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ EF004XXAR1 is a compound based on Polyetherimide (PEI) resin containing 20% glass fiber for Large Format Additive manufacturing (LFAM) applications. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide low thermal expansion, high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.

SABIC's Specialties Business LNP™ THERMOCOMP™ DC0041XA51 compound is based on PC Copolymer Resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Higher Strength, Higher Temperature Performance and Higher Throughput compared to ABS and PPE, as well as Smooth Surface Finish. This halogen-free flame retardant resin is EN45545 R1 HL3 and R27 HL2 compliant and an ideal candidate for train interior applications (category R1). It also meets requirements of NFPA-130a

SABIC's Specialties Business LNP™ THERMOCOMP™ ZC004XXAR1 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Lower Thermal Expansion, Improved Hydrolytic Stability, Higher strength to Weight Ratio, Higher Temperature Performance and improved processing vs. ABS based grades.

SABIC's Specialties Business LNP THERMOCOMP ZF004XXAR1 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% glass fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Lower Thermal Expansion, Improved Hydrolytic Stability, Higher Strength to Weight Ratio and Higher Temperature Performance vs. ABS. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ 6C004XXAR1 compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Improved Chemical Resistance, Lower Warp and Good Surface Finish.

SABIC's Specialties Business LNP THERMOCOMP AC004XXAR1 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Easy Processing, Low warp and Good Print Surface quality, making them a good candidate material for a broad range of applications and tooling, including thermoforming and vacuum-forming.FeaturesCost EffectiveEasier ProcessingGood PrintabilityGood ProcessabilityHigh StiffnessLow WarpageVacuum FormingApplications3D PrintingAdditive Manufacturing This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 9085 is a polyetherimide blend that is specifically formulated for use in aerospace cabin interiors, as well as in rail applications and for FDM printing. It complies with aerospace FAR25.853 and OSU55/55 heat release requirements and has been approved by major aerospace OEMs. With a rail EN45545 R6-HL3 rating, this material offers excellent flow, stiffness, and ductility balance, allowing for thin-walled, lightweight designs. ULTEM™ Resin 9085 is opaque and can be custom colored to meet specific design requirements. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ EC004XXAR1 is a compound based on Polyetherimide (PEI) resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications needing higher stiffness vs glass fiber. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide low thermal expansion, high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.

SABIC's Specialties Business LNP™ THERMOCOMP™ AM DC004XXA11is a compound based on High Heat PC copolymer resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications, including mid-temperature autoclaving tooling. This compound can offer higher temperature performance than standard PC and avoid some of the processing challenges associated with high temperature materials.

SABIC's Specialties Business LNP THERMOCOMP DC004XXAR1 compound is based on Polycarbonate (PC) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Higher Strength, Higher Temperature Performance and Higher Throughput compared to ABS and PPE, as well as Excellent Ductility and Smooth Surface Finish.FeaturesCost EffectiveHigh DuctilityHigh Impact ResistanceHigh StiffnessHigh StrengthHigh Temperature StrengthSmooth Surface FinishVery Good Heat ResistanceApplications3D PrintingAdditive Manufacturing This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP THERMOCOMP AM JC004XXAR1 is a compound based on PESU (Polyethersulfone) resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications needing an inherent FR, reinforcement, and a high heat amorphous solution. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOCOMP™ EZ006EXAR1is a compound based on Polyetherimide (PEI) resin containing 30% milled glass fiber for Large Format Additive manufacturing (LFAM) applications requiring better dimensional stability and low thermal expansion. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, offer high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.

SABIC's Specialties Business LNP™ THERMOCOMP™ EC004EXAR1 compound is based on Polyetherimide (PEI) resin containing 20% carbon fiber designed to provide a Wider Process Window and Easier Flow for Large Format Additive Manufacturing (LFAM) applications needing High heat performance. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide Low Thermal Expansion, High Temperature Performance, Excellent Strength-to-Weight Ratio, High Modulus and Low Creep.

Crestaform® Open 3D printing resin is a versatile 3D printing resin designed for rapid prototyping and the creation of high-resolution models. It offers a fast and efficient method of fabrication. Compatible with various types of resin 3D printers, such as LCD, SLA, and DLP machines, it is suitable for use with popular brands including Formlabs, Asiga, Anycubic, and Elegoo.

Crestaform® Dental Modelling HP 3D printing resin is specifically designed for the rapid fabrication of precise fixed and removable dental prosthetic models. It combines remarkable dimensional stability during the scan-to-model process with fast printing speeds. Special attention has been given to achieving excellent surface finish and esthetics in the final parts, ensuring clear definition of margin lines and anatomical details.

Crestaform® Rapid 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It can be used in most stereolithography 3D printers and cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestaform® Rapid 8K 3D printing resin is specifically optimized for high reactivity and positive feature build-up. It minimizes the depth of cure, enabling the full potential of next-generation 8K LCD and DLP 3D printers to be unlocked. With this resin, intricate details can be created with precision.

Crestaform® Tough 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It can be used in most stereolithography 3D printers and cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestaform® Rapid 2.0 3D printing resin is an upgraded general-purpose resin formulation that offers a lightning-fast print speed, high print quality, enhanced color, robust mechanical performance, and increased usability. It is specifically designed for creating high-resolution models, figurines, rapid prototyping, and jewelry.

Crestaform® Durable 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It is compatible with most stereolithography 3D printers and is cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

MOCOM Compounds ALCOM® 3D TCE PC 5020 16116 is a polycarbonate-based polymer with 20% special filler that has increased thermal conductivity, is antistatic, and is heat stabilized. It is used in the Lighting, electrical and electronic market segment and is applicable for Extrusion of 3D printable FDM filaments for functional components. Processing Injection molding Filament extrusion melt temperature should be 250-270°C, and recommendations for 3D printing depending on printer type are nozzle temperature of 300-320°C, bed temperature of 80-120°C, and print speed of 10-60 mm/s.

HELIORES 3D Rapid 10 is a photopolymer for UV 3D printing designed for use on various types of SLA and DLP printers. The Rapid 10 is a general purpose prototyping material with ABS and PP-like properties. With its high reactivity and excellent precision, the Rapid 10 saves time and produces elements with exceptional details.Features & BenefitsHigh reactivityHigh level of precision and accuracyReduced operational costs

Nexa3D xGPP-Translucent includes features such as No Water uptake, Fast Printing Speed, Low Shrinkage, High Accuracy.

Nexa3D 3843-xABS Black is a high performance, high modulus product which boasts excellent flexural and tensile physical properties with a relatively high degree of elongation. Nexa3D 3843-xABS Black displays high green strength and good Heat DeflectionTemperature enabling it to print accurately and function in a wide variety of applications. Nexa3D3843-xABS Black has been tested in QUV exterior weathering conditions (ASTM G-154) for 800 hours with less than a 15% change in Tensile and IZOD Impact properties.

Nexa3D xPP405-Clear is a high elongation and high toughness material with outstanding impact resistance and excellent surface finish. This stiff and durable high performance material is ideal for a wide variety of tools in the production floor, including manufacturing aids and final parts such as housings and consumer goods applications. The unique set of performance attributes makes it comparable to an unfilled thermoplastic like polypropylene. Parts can be printed with various DLP printers and machined, tapped, or polished for final finish.