Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Boron-free E-CR glass.
- High thermal properties
- Polyester, Vinylester & Epoxies compatible.
- Low strand integrity.
- Globally available
- High corrosion resistance
- High resistance to fire propagation, high insulation properties.
- Maximum flexibility on workshops
- High speed impregnation in pultrusion
- Get flexibility in manufacturing the highest quality wherever you are
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Composites End Use
- Composites Processing Methods
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile Modulus | 81-83 | GPa | ASTM D2343-08 |
Fibre's CLTE | 6 10-6 ° | K-1 | ASTM D696 |
Fibre's CLTE | 916 | °C | Softening (ASTM Point C338) |
Filament diameter | 17 - 34 | µm | — |
Linear density | 1200 - 9600 | tex (gr/km) | — |
Tensile Strength | 2200-2400 | MPa | ASTM D2343-08 |
Fibre's Density | 2.62 | g/cm³ | — |
Packaging & Availability
- Packaging
- Bobbins are individually wrapped with a stretched plastic film for protection, improved handling and to allow optimum transfer from bobbin to bobbin. Nominal weight of C bobbins is 25 kg.
- Two pallet configurations are available:- Bulk-Pack: standard packaging, consists of individual bobbins.- Creel-Pack: bobbins are connected together for continuous unwinding and no bobbins handling for operators.
Storage & Handling
- Storage
Storage in a cool and dry warehouse into the original packaging is formally recommended. More precisely ideal storage conditions are a temperature between 15°C and 35°C and a relative humidity comprised between 35% and 75%.If these conditions are maintained, the glass fiber product should not undergo significant changes when stored for extended periods of time. It is also strongly recommended to condition it in the workshop for at least 24 hours before use to prevent condensation.For an optimal processing it is recommended to use the product in ambient conditions (20°C-23°C and a relative humidity of 60%-65%).