Products

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® SP 4414 is a silicone polyether copolymer used as an emulsifying and co-solubilizing agents of siloxane and organic systems. It is compatible with a wide range of cosmetic ingredients. It acts as a surfactant for stable foaming, improves wet and dry combability, and imparts silky gloss and pleasant feel on hair and skin. This product is recommended for hair care and skin care applications.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Silicone polyethers, also known as silicone surfactants, are used in many industries as emulsifiers, foaming agents, solubilizers and softeners. They are also known to add leveling, slip and mar resistance properties to coatings formulations.

Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® VQM Products are additives for the improvement of mechanical properties of addition cured silicone elastomers. The curing mechanism of vinyl-functional silicone polymers (Andisil® VS) is a platinum catalyzed addition reaction with silicone crosslinkers containing silicon-hydride groups. The mechanical properties of the unfilled RTV are rather poor. Therefore the properties are improved with the addition of appropriate fillers i. e. Carbon black, fumed or precipitated silica and other fillers well known to formulators with expertise in compounding silicones. Andisil® VQM Products are comprised of vinyl-functional silicone polymers and vinyl-functional QM-resins. The product group is beneficial in formulating filler free, transparent systems which require good mechanical properties. The products will also enhance improvement of mechanical properties of filled formulations.

Andisil® SF 1143 are trimethylsiloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® OH 750 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® OH 20,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Methyl Phenyl Reactive Polymers are vinylterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. Phenyl contents of 3-8 mole % optimize low temperature characteristics. The higher phenyl content materials can be used for index matching which improves clarity. All of these polymers are used in addition curing formulations in which a platinum catalyst and silicon-hydride crosslinker are present.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® SP 19 is a trisiloxane ethoxylate with exceptionally low surface tension which makes it an ideal wetting agent. It has a low viscosity and is water dispersible.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® VQM Products are additives for the improvement of mechanical properties of addition cured silicone elastomers. The curing mechanism of vinyl-functional silicone polymers (Andisil® VS) is a platinum catalyzed addition reaction with silicone crosslinkers containing silicon-hydride groups. The mechanical properties of the unfilled RTV are rather poor. Therefore the properties are improved with the addition of appropriate fillers i. e. Carbon black, fumed or precipitated silica and other fillers well known to formulators with expertise in compounding silicones. Andisil® VQM Products are comprised of vinyl-functional silicone polymers and vinyl-functional QM-resins. The product group is beneficial in formulating filler free, transparent systems which require good mechanical properties. The products will also enhance improvement of mechanical properties of filled formulations.

Ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

A release agent that in most cases provides a heat-stable film that does not carbonize at temperatures that quickly destroy many organic mold release agents. Effective as a parting agent in die casting aluminum, zinc, magnesium and other metals

Filled Silicone Vinyl-terminated Compound

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents.

Andisil® SF 1505 is a blend of volatile siloxanes and high molecular weight gum which provides excellent water resistance, enhanced adhesion of actives and anti-friss properties. It offers a long-lasting feel, film-forming, lubrication, tack reduction, UV protection, and imparts a variety of sensory properties. This product is recommended for lotions/creams, skin and suncare, color cosmetics, and hair care applications.

Aminopropyltriethoxysilane. Maximizes the physical and electrical properties thermoset and thermoplastic composites. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.