Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Chemical Description
- Alkylaryl Polysiloxane Fluid
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Applications
- Can be used for a wide variety of applications. It can be used for the production of floor mats and tiles, seals, grommets, gaskets, toys, paneling, decorative trim, household appliance assemblies, and similar plastic or rubber products that are coated, painted, plated or bonded.
- Can be used as an additive in rubber and plastic formulations. When added as a built-in lubricant, the fluid facilitates the assembly of mechanical components and acts as a lubricant in service.
- Instructions For Use
- For optimum performance, Andisil® SF 270 Fluid should be diluted with solvent prior to use. A common dilution ratio is 100 parts by weight of solvent to 1.0 to 2.0 parts by weight of the product. Suitable solvents to use are aromatic solvents, such as xylene and also VM&P naphtha can be used. The diluted product can be applied by brushing, spraying or wiping.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point | 93 C | °C | — |
| Refractive Index (at 25 °C) | 1.4600 - 1.4640 | — | — |
| Specific Gravity (at 25°C) | 1.000-1.012 | — | — |
| Viscosity (at 25°C) | 1125 - 1645 | cSt | — |
Regulatory & Compliance
Storage & Handling
- Storage & Shelf Life
- When stored at or below 25 °C (77 °F) in the original unopened containers, this product has a shelf life of 12 months from the date of production. Required for safe use is not included. Before handling, read product and safety data sheets, physical and health hazard information.