Products

Capmul® MCM is a mono- and diglyceride with unique properties and versatility as a solvent, emulsifier, and emollient for creams, lotions, and rinse-off applications. This high purity distilled monoester is effective as a preservative alternative, based on natural materials, and makes an excellent primary or secondary surfactant in personal care products and cosmetics. It is used to produce stable emulsions, to modify viscosity and can act as a carrier and vehicle in selected applications. It is manufactured in USA.

Capmul® MCM C8 EP/NF is a mixture of monoacylglycerols, containing variable quantities of diand tri-acylglycerols, obtained by direct esterification of glycerol with caprylic (octanoic) acid. It is manufactured in USA.

Acconon® MC8-2 EP/NF is a mixture of monoesters, diesters, and triesters of glycerol and monoesters and diesters of polyethylene glycols with a mean relative molecular weight between 200-400. It may contain free macrogols. It is manufactured in USA.

Caprol® PGE 860 is a very unique product for ABITEC, with the highest HLB of our polyglycerol family. This ingredient is well-known for its slip & foam stabilizing capabilities in rinse off products such as 2-in-1 shampoos. It also provides improved hydration & moisture for healthier looking hair.   Additionally, this food-grade, bio-based ingredient is a premium plasticizer in any range of skincare products aiding in sealed moisture and reduction of dry and flaky skin. It is manufactured in USA.

Capmul® GMO-50 EP/NF (Glyceryl Monooleate) is a mixture of monoglycerides, mainly glyceryl monooleate, together with variable quantities of diglycerides and triglycerides. The nominal content of monoglycerides is 60%. It is obtained by partial glycerolysis of vegetable oil that consists mainly of triglycerides of oleic acid, or by esterification of glycerol with oleic acid of vegetable origin. A suitable antioxidant may be added. Capmul® GMO-50 EP/NF is a multi-functional emulsifier useful in the production of pharmaceutical and food products. It is manufactured in USA.

Capmul® GMO-50 glycerol monooleate is a food-grade multifunctional emulsifier that is highly useful in personal care & cosmetic applications such as, lotions, creams, lipsticks, and eyeliners. Capmul GMO-50 is sunflower glycerides and suitable in barrier creams and lotions. It easily forms gel phases with other surfactants in aqueous environments and can serve as a refatting agent. It is an excellent non polymeric invert emulsifier providing an elegant finish to your formulation. It is manufactured in USA.

Captex® 355 Medium-Chain Triglycerides originate from vegetable-based sources (typically palm, palm kernel and/or coconut). These food-grade, safe, responsibly sourced ingredients are best known for their functional benefits as emulsifiers, solubilizers and refatting agents for use in a range of markets and applications. They are preferred lipophilic vehicles and solvents for use in various delivery systems, but are most well-known for their numerous health benefits in areas such as weight management, energy, and cognition.ABITEC offers a variety of C8 (caprylic) and C10 (capric) variations to suite your formulation requirements. It is manufactured in USA.

Capmul® MCM EP/NF is a mixture of monoacylglycerols, obtained by direct esterification of glycerol with caprylic (octanoic) and capric (decanoic) acids. It is manufactured in USA.

Sterotex® K, NF is a powder that is widely used as a lubricant in tablet manufacturing in pharmaceutical industries. It may be used in compacting and compounding processes in the catalyst, ceramic and powder metallurgy fields. Sterotex® K, NF is derived from renewable vegetable oils that are fully refined, bleached, and deodorized and is a neutral organic ester (triglyceride) that is low in ash content. It is manufactured in USA.

HydroKote® C is a fully-hydrogenated cottonseed oil. It is a member of the crystal promoters and stearines family. It is a multi-purpose, low iodine value, high melting point oil that is further processed into flaked form for easier handling. It is manufactured in USA.

Captex® 170 EP is an ester prepared from the dehydration of coco fatty alcohols with caprylic and capric acids. It is a polar lipid suitable for solubilizing many types of active ingredients. It may also enhance translocation of API. It is manufactured in USA.

Sterotex® HM is a fully-hydrogenated, vegetable-oil powder that is widely used as a lubricant in tablet manufacturing in pharmaceutical and food supplement industries. It may be used in compacting and compounding processes in the catalyst, ceramic and powder metallurgy fields. Sterotex® HM is derived from renewable vegetable oils that are fully refined, bleached, and deodorized and is a neutral organic ester (triglyceride) that is low in ash content and is produced according to Kosher requirements. It is manufactured in USA.

Captex® 355 EP/NF/JPE is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (‰ˆ55%) and capric. It contains not less than 95% of saturated fatty acids with 8 and 10 carbon atoms. It is prepared from raw materials of vegetable sources. It is manufactured in USA.

Sterotex® NF is a powder that is widely used as a lubricant in tablet manufacturing in pharmaceutical and food supplement industries. It may be used in compacting and compounding processes in the catalyst, ceramic and powder metallurgy fields. Sterotex® NF is derived from fully refined, bleached and deodorized renewable vegetable oil, and is a neutral organic ester (triglyceride) that is low in ash content. Sterotex® NF is produced according to Kosher requirements. It is manufactured in USA.

Captex® 8000 Medium-Chain Triglycerides originate from renewable vegetable-based sources (typically palm, palm kernel and/or coconut). Captex 8000 is comprised of pure C8 (caprylic) fatty acid, which are food-grade, safe, and responsibly sourced. They are best known for their functional benefits as emulsifiers, solubilizers and refatting agents for use in personal care and cosmetic applications, but also boast numerous health benefits in human nutrition such as weight management, energy, and cognition. It is manufactured in USA.

Caprol® ET is a mixed polyglycerol ester prepared from mixed vegetable fatty acids and a glycerol polymer containing an average of six glycerol units and is typically used as a cloud (crystallization) inhibitor in vegetable and salad oils. It is manufactured in USA.

Capmul® 708G is a glycerin monoester of caprylic acid. It has low minimum inhibitory concentration against tested gram-positive bacteria and fungi. It is a light, non-greasy emollient that has good skin penetration. It is manufactured in USA.

HydroKote® M is a standard lauric coating fat produced from palm kernel oil that is fully-hydrogenated, refined, bleached and deodorized. It has soy lecithin added. HydroKote® M is used primarily as a replacement for cocoa butter where its texture and narrow melting range characteristics are essential. The bland character, low irritation and excellent stability of HydroKote® M make it an ideal material for cosmetic applications. It is manufactured in USA.

Captex® 300 Medium-Chain Triglycerides originate from renewable vegetable-based sources (typically palm, palm kernel and/or coconut). This mix of C8 (caprylic) and C10 (capric) fatty acids are food-grade, safe, responsibly sourced ingredients. They are best known for their functional benefits as emulsifiers, solubilizers and refatting agents for use in personal care and cosmetic applications, but also boast numerous health benefits in areas such as weight management, energy, and cognition. This product contains about 70% C8 and 30% C10. It is manufactured in USA.

Captex® 300 EP/NF is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (‰ˆ70%) and capric. It contains not less than 95% of saturated fatty acids with 8 and 10 carbon atoms. It is prepared from raw materials of vegetable sources. It is miscible with most organic solvents including 96% ethanol. It is manufactured in USA.

Acconon® C-44 EP/NF is a mixture of monoesters, diesters, and triesters of glycerol and monoesters and diesters of polyethylene glycols with a mean relative molecular mass of 1500. It may contain free macrogols. It is manufactured in USA.

Capmul® 808G EP/NF is a glycerin monoester of caprylic acid. It is a distilled monoester. It is manufactured in USA.

Sterotex® P is a spray-chilled powder produced from fractionated, non-hydrogenated, refined palm oil. It is manufactured in USA.

Captex® GTO is a specialty triglyceride manufactured by the esterification of fractionated fatty acids (mainly oleic) and glycerin. Fully refined and deodorized, and with excellent stability, low irritation, bland taste and odor, Captex® GTO is ideally suited for a variety of nutritional and personal care applications. It is manufactured in USA.

Captex® 100 is a diester formed from a reaction of selected high-purity vegetable fatty acids and propylene glycol. It is Kosher certified. Captex® 100 is totally miscible in mineral oil and in 95% ethanol. It has a lower viscosity than mineral oil. Captex® 100 is an excellent skin emollient and produces a smooth, non-greasy, powdery after-feel with shine. Due to its excellent solvency, Captex® 100 works exceptionally well as a substitute for mineral oil in cosmetic makeup-remover formulas. Because of its unique properties, viscosity, and miscibility with other cosmetic components, Captex® 100 offers advantages in suncare and haircare products where spreadability and shine are desired. The non-oily character, excellent stability, bland taste, and neutral odor make this product an ideal choice as a solubilizer and carrier of vitamins, colors, and flavors for selected pharmaceutical and nutritional formulations, or processing aids such as pan and mold-release agents. It is manufactured in USA.

Caprol® 3GO is a mono-ester of oleic acid and a glycerin polymer containing an average of three glycerin units. It is a non-ionic, non-alkoxylated emulsifier. Caprol® 3GO is a multi-functional emulsifier which is used in a wide range of nutritional, cosmetic, and specialized Personal Care applications providing stable emulsions in intermediate HLB systems where two or more other emulsifiers might be used. It is manufactured in USA.

Captex® 170 medium-chain triglyceride is a cocoyl caprylocaprate that is a low viscous liquid at room temperature, making it an excellent film former and plasticizer for cosmetic formulations. It is also an excellent emollient and skin feel modifier. Captex 170 is able to translocate actives across the skin with and not through it. It is manufactured in USA.

HydroKote® 112 is a standard lauric coating fat produced from palm kernel oil that is hydrogenated, refined, bleached and deodorized. It has soy lecithin added. HydroKote® 112 is used primarily as a replacement for cocoa butter where its texture and narrow melting range characteristics are essential. The bland character, low irritation and excellent stability of HydroKote® 112 make it an ideal material for cosmetic applications such as lipsticks, glosses, pomades, solid fragrances, antiperspirant sticks, emollient creams and lotions. It is manufactured in USA.

Captex® 355 EP/NF is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (‰ˆ55%) and capric. It contains not less than 95% of saturated fatty acids with 8 and 10 carbon atoms. It is prepared from raw materials of vegetable sources. It is miscible with most organic solvents including 96% ethanol. It is manufactured in USA.

Capmul® PG-8 NF is Type II Propylene Glycol Monocaprylate, a propylene glycol monoester of caprylic acid. It is an excellent solvent and a good bioavailability enhancer for many complex, poorly soluble drug compounds. Capmul® PG-8 NF is used primarily as a carrier in soft and hard gelatin capsules and a penetration enhancer in transdermal drug delivery systems. It is manufactured in USA.

Capmul® PG-8-70 NF is Type I Propylene Glycol Monocaprylate, a propylene glycol monoester of caprylic acid. It is an excellent solvent and a good bioavailability enhancer for many complex, poorly soluble drug compounds. Capmul® PG-8-70 NF is used primarily as a carrier in soft and hard gelatin capsules and a penetration enhancer in transdermal drug delivery systems. It is manufactured in USA.

Capmul® GDB EP/NF is a mixture of diglycerides, mainly glyceryl dibehenate, together with variable quantities of monoglycerides and triglycerides. It is obtained by the esterification of glycerol with behenic acid of vegetable origin. It is manufactured in USA.

Pureco 76 is a highly refined coconut oil. This specialty oil is kosher, non-hydrogenated, and very well utilized in the nutritional and personal care space. Besides its€™ excellent properties as a food-grade ingredient, it provides exceptional skin barrier properties for a variety of personal care applications. It is manufactured in USA.

Caprol® MPGO is a 100% natural plant-based polyglycerol oleate with very unique properties, especially suited for rinse-off applications where a clear formula is preferred. In addition, these ingredients provide a range of emollience properties for skincare products such as, a great moisture barrier, increased moisture retention in the skin, and overall improved skin-feel.This ingredient is produced free from harsh chemicals, making it ideally suited to formulate PEG-free, Sulfate-free, Paraben-free, and safe friendly products for humans & the environment. It is manufactured in USA.

Capmul® PG-2L EP/NF is a mixture of the propylene glycol mono- and diesters of lauric (dodecanoic) acid. It contains not less than 70.0 percent of diesters and not more than 30.0 percent of monoesters. Capmul® PG-2L EP/NF may be appropriate for microemulsions, soft gelatin capsules, suppositories, suspensions, and/or topical applications. It is manufactured in USA.

Capmul® PG-12 EP/NF is a propylene glycol monoester of lauric acid. It is an excellent solubilizer for many complex poorly soluble drug compounds. Capmul® PG-12 EP/NF is used primarily as a carrier in soft and hard gelatin capsules, a penetration enhancer in transdermal drug delivery systems, and a secondary emulsifier in microemulsions. It is manufactured in USA.