Products

HisarCal® St-1 Fine is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

HisarCal® St-2 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

HisarCal® Ex-1 is used in the paper industry as a micronized calcite by adding 15-30% cellulose in the production of writing paper, wall paper, and cardboard. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Adacal Industrial Minerals Micronized Lime production is carried out with circular section, parallel flow, double shaft, regenerative Kiln and the process is controlled by scada. Due to high quality raw material and technological equipment, high efficiency calcination occurs. Low impurity and reactivity, high whiteness and calcium oxide activity are the most prominent characteristics of our lime.

HisarCal® Ex-5 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Adacal Industrial Minerals CL 80 S (Plaster Lime) is a color. Our lime's most notable characteristics are its low impurity, high whiteness, and CaO activity. As a result of these characteristics, it improves plaster adhesion to the applied floor due to its high binding property, good hydrating quality prevents deformation such as cracking after application, and high product efficiency allows for more operations to be completed with less material.

adaCAL B1 enhances the product's strength, opacity, whiteness, brightness, and viscosity adjustment (thixotropy) Because of these properties, it can be used in a variety of industries, including paint, plastic, paper, food, cosmetics, and rubber. When adaCAL is used in paint, hiding power is increased. The desired level of whiteness is achieved. The surface smoothness is improved. The desired brightness/opacity level is specified. Scrub resistance has been improved. Density is reduced. With the use of adaCAL in plastic, the impact strength of PVC profile products is improved (even at low temperatures)

adaCAL N1-C enhances product properties such as strength, opacity, whiteness, brightness, and viscosity adjustment (thixotropy) Because of these characteristics, it can be used in a variety of industries including paint, plastic, rubber, adhesive, sealant, and chemistry. AdaCAL N1-C is used in the manufacture of adhesives and sealants. Acts as a rheological agent during the manufacturing process.

HisarCal® St-99 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

HisarCal® Ex-3 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

AdaCAL P-1 adds strength, opacity, whiteness, brightness, and the ability to adjust viscosity to the product (thixotropy) Because of these characteristics, it can be used in a variety of industries, including paint, plastic, paper coating, food, chemistry, and pharmaceuticals. When adaCAL P1 is used in paint, hiding power is increased. The desired level of whiteness is achieved. The surface smoothness is improved. The desired brightness/opacity level is specified. Scrub resistance has been improved. Density is reduced.

HisarCal® Ex-99 is used in the paper sector. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

HisarCal® Ex-40 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

adaCAL B1-C enhances product properties such as strength, opacity, whiteness, brightness, and viscosity adjustment (thixotropy) Because of these characteristics, it can be used in a variety of industries such as paint, plastic, chemistry, and so on. When adaCAL B1-C is used in paint, the hiding power is increased. The desired level of whiteness is achieved. The surface smoothness is improved. The desired brightness/opacity level is specified. Scrub resistance has been improved. Density is reduced.

HisarCal® St-3 is used in the paper industry. By adding 15-30% to cellulose, micronized calcite is used primarily in the production of writing papers, wallpapers, and cardboard. Because of its high whiteness, low cost, and other technical benefits to paper, it has replaced kaolin in the paper industry over the last ten years, beginning in Europe.

HisarCal® St-1 is also used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Adacal Industrial Minerals Granular Lime is Adaçal granüle quick lime that is produced as a calcium quicklime lime with a high percentage of calcium oxide and low impurities.

HisarCal® Ex-2 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

HisarCal® St-5 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.