PolySurF™ HPL

1 of 5 products in this brand
ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

Functions: Adhesion Promoter, Flame Retardant, Plasticizer, Surfactant, Surfactant (Nonionic)

Chemical Family: Acrylics, Acrylates & Methacrylates, Esters, Mixtures & Blends, Organophosphates, Phosphate Esters, Phosphorous-based Compounds

Labeling Claims: Halogen-free, Solvent-free

Compatible Polymers & Resins: Acrylics, Polyesters, Polyvinyl Chloride (PVC)

Features: Good Leveling, Improves Adhesion, Low Migration, Mechanically Stable, Moderate Yellowing Tendency

End Uses: Enamel, Lacquers, Radiation Curable Adhesive, Radiation Curable Coating, Radiation Curable Ink

    Knowde Enhanced TDS

    Identification & Functionality

    Features & Benefits

    Benefits
    • It imparts excellent Leveling/Wetting and improves adhesion to metal surfaces in UV-curable systems.
    • It is an effective flame retardant, which does not contain halogens. Addition of approximately 5 % results in a final P content of the flame-retardant polyester, polyacrylate or PVC of approx. 0.5 %.
    • It is an effective plasticizer. No plasticizer migration occurs after through-cure.
    • It improves both the storage and mechanical stability of an emulsion system, whereas grit building and foam formation is minimized.
    • No migration of the non-ionic surfactant occurs after film formation
    • Paints and lacquers based on emulsions containing this “build-in” lipophilic non-ionic surfactant show improved wet-scrub resistance, improved adhesion to metal and high yellowing resistance even after enamel application.
    • The di-phosphate ester affords some degree of crosslinking without gel formation.

    Applications & Uses

    Compatible Substrates & Surfaces
    Cure Method
    Adhesive & Sealant Type
    Ink & Toner Type
    Applications and typical treat level recommended
    • Emulsions for paints, lacquers, printing inks and adhesives                   0.5 - 2.5 % wt. based on monomers
    • Flame retardant for unsaturated polyesters and polyacrylates                ca. 5 % wt. for flame retardant
    • Polymerisable Plasticizer for polyacrylates, polyesters, PVC
    • Flame retardant and Plasticizer for UV curable systems

    Properties

    Physical Form
    Appearance
    Clear liquid
    Odor
    Sweet smell
    Typical Properties
    ValueUnitsTest Method / Conditions
    Active Contentmin. 99.5%
    Colormax. 3Gardner
    Phosphorus Contentapprox. 10%
    pH Value0.5 - 4.5
    Solidification Point5.0-10.0°C
    Viscosity (20°C)50-300

    Regulatory & Compliance

    Quality Policy
    • The objective of our quality policy is the continuous fulfillment of the internal and external requirements agreed upon with our partners with regards to everybody’s performance.
    • The Quality System of ADD APT_x0001_ Chemicals BV is based on the principles of the NEN-EN--ISO-Standard 9001: 2015.
    Liabilities
    • All recommendations for the use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations, buyer or user remains responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility thereof. Buyer has to ensure that the intended use of the products will not infringe any third party’s intellectual property rights. We warrant that our products are free from defects in accordance with, and subject to, our general conditions of sale and supply.

    Storage & Handling

    Storage
    • The standard inhibition is 75 ppm MEHQ. The product should be stored at a temperature of no less than 10 °C and no more than 25 °C and away from light. It must be stored under air atmosphere, as the presence of oxygen is essential to activate the stabilizer.
    • Under these conditions, the product is commercially guaranteed for three months after delivery.