PolySurF™ Hpm

1 of 5 products in this brand
ADDAPT_x005F_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

Functions: Adhesion Promoter, Coupling Agent, Flame Retardant, Surfactant, Surfactant (Anionic)

Chemical Family: Acrylics, Acrylates & Methacrylates, Esters, Mixtures & Blends, Organophosphates, Phosphate Esters, Phosphorous-based Compounds

Labeling Claims: Halogen-free, Solvent-free

Compatible Polymers & Resins: Acrylics, Epoxies (EP), Polyesters

Features: Improves Adhesion, Low Migration, Mechanically Stable, Moderate Yellowing Tendency

End Uses: Enamel, Lacquers, Radiation Curable Adhesive, Radiation Curable Coating, Radiation Curable Ink

    Knowde Enhanced TDS

    Identification & Functionality

    Technologies

    Features & Benefits

    Benefits
    • PolySurF HPm promotes adhesion to metal, metal oxides, glass and concrete.
    • It is an effective flame retardant, which does not contain halogens. Addition of approximately 4%, results in a final P content of the flame-retardant polyester or polyacrylate of approx. 0.5 %.
    • It improves both the storage and mechanical stability of an emulsion system, whereas grit building and foam formation is minimized.
    • No migration of the surfactant occurs after film formation
    • Paints and lacquers based on emulsions containing this “build-in” anionic surfactant show improved wet-scrub resistance, improved adhesion to metal and high yellowing resistance even after enamel application
    • The mono-phosphate ester can be reacted with emulsions containing polymers with 2 or more epoxy groups or with emulsions containing, for example, Glycidyl(Meth)acrylate.
    • The di-phosphate ester affords some degree of crosslinking without gel formation.

    Applications & Uses

    Compatible Polymers & Resins
    Compatible Substrates & Surfaces
    Cure Method
    Adhesive & Sealant Type
    Ink & Toner Type
    Applications and typical treat level recommended
    • Emulsions for paints, lacquers, printing inks and adhesives              0.5 - 2.5 % wt. based on monomers
    • Flame retardant for unsaturated polyesters and polyacrylates           ca. 4 % wt. for flame retardant
    • Adhesion promoter for metal (polyacrylates, polyesters)                   ca. 3.0 % wt. based on monomers
    • Flame retardant and adhesion promoter for UV curable systems       ca. 1 - 2.5% wt. based on monomers

    Properties

    Physical Form
    Appearance
    Clear liquid
    Odor
    Sweet smell
    Typical Properties
    ValueUnitsTest Method / Conditions
    Active Contentmin. 99.5%
    Colormax. 3Gardner
    pH Value0.5 - 3.0
    Phosphorus Contentapprox. 13 -14%
    Viscosity (25°C)max. 5000

    Regulatory & Compliance

    Quality Policy
    • The objective of our quality policy is the continuous fulfillment of the internal and external requirements agreed upon with our partners with regards to everybody’s performance.
    • The Quality System of ADD APT_x0001_ Chemicals BV is based on the principles of the NEN-EN--ISO-Standard 9001: 2015.
    Liabilities
    • All recommendations for the use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations, buyer or user remains responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility thereof. Buyer has to ensure that the intended use of the products will not infringe any third party’s intellectual property rights. We warrant that our products are free from defects in accordance with, and subject to, our general conditions of sale and supply.

    Storage & Handling

    Storage
    • The standard inhibition is 75 ppm MEHQ. The product should be stored at a temperature of no less than 10 °C and no more than 25 °C and away from light. It must be stored under air atmosphere, as the presence of oxygen is essential to activate the stabilizer.
    • Under these conditions, the product is commercially guaranteed for three months after delivery.