Products

PEX-W100KP is a mixture of mono- and di-Phosphate Ester(s). It imparts benefits like: Anti-Corrosion properties and Surface Tension reduction. It is a Phosphate Ester of an Oxo-Alcoholethoxylate with Potassium Hydrogen Phosphate in water.

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT Anticor A40 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxy Amides. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT Foamstop WS 17 is a highly effective, complete water-soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. FDA-no - 21 CFR and 173.340

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

ADDAPT_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.

ADDAPT BioWet 75 is a biodegradable wetting and leveling agent for water based systems such as fountain solutions and water based lacquers. The product shows excellent static as well as dynamic surface tension values. It is a Polyhydroxy – Amide in water. The product is EINECS registered.

ADDAPT WaxMul C 325 is a wax emulsion based on refined Type 3-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti-Block. It is an emulsion based on T3-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

ADDAPT WaxMul WM 120 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving buffable films with excellent gloss and water repellent properties. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT BioWet 45 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on glass substrates. ADDAPT BioWet 45 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols and Polyhydroxy - Amide. The ingredients are EINECS registered.

ADDAPT WaxMul WM 45 is a very high melting point PP-wax emulsion giving excellent surface hardness and blocking resistance. It is an emulsion of Polypropylene wax in water.

ADDAPT PolySurF HPH is a solvent-free UV-curable additive. It can also act as a polymerisable hydrophilic non-ionic surfactant and/or co-polymerisable plasticizer. It is a proprietary mixture of Acrylated mono- and di-Phosphate ester; the mono-Phosphate ester being O-(EO)n>10-CH3 modified; where the reactive Acrylate group is Methacrylate

ADDAPT BioWet 60 is a solvent free, ready biodegradable Glass Adhesion promoter and Glass Corrosion inhibitor for aqueous systems on glass substrates. A proprietary blend of PolyAlkylene Glycols and Polyhydroxy – Amide. All constituents are EINECS registered and comply with the FDA regulation (incidental contact with foodstuff).

ADDAPT Foamstop VF 35N is a highly effective Foam Control Agent for low VOCphysical Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of oils with PAG’s and surface active components - MOSH/MOAH free - All constituents comply with the FDA regulation (incidental contact with foodstuff). FDA regulation: #173.340

ADDAPT WaxMul WM 15 is a high melting point PE-wax emulsion with excellent resistance to yellowing. It is an emulsion of Polyethylene wax in water.

ADDAPT SILSTAB L 100 is a solvent free, Potassium Silicate solution for aqueous systems such as Renders (Putz), Interior and Exterior primers and Textured Masonry Coatings. It is a stabilized Potassium Silicate solution in water.

ADDAPT WaxMul WM 35 is a high melting point PE-wax emulsion giving very good wet scrub resistance of Paints and improves the buffability of Floor polishes. It is an emulsion of Polyethylene wax in water.

ADDAPT Foamstop SL 100 is a highly effective and versatile Foam Control Agent. It can be used in aqueous and non-aqueous systems. It is a Silicone Compound containing minerals.

ADDAPT Foamstop 100N is a complete water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT® Anticor A84 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

ESTER 20DA is a solvent free pigment dispersing agent for both solvent based and water based systems. It is especially recommended as dispersing agent for Carbon Black. ADDAPT® ESTER 20DA is a synthetic ester

ADDAPT BioWet 175R is a solvent free, biodegradable wetting/leveling agent which improves Open time and Flow in Textured masonry coatings and Plasters. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

ADDAPT CODIS 95 is an effective Co-Dispersant for (mineral) pigments and fillers. It is also suitable for colorants and solvent based Alkyd paints. ADDAPT CODIS 95 is a proprietary blend of Alkanol-amines in water. All constituents are EINECS registered and in compliance with the detergent directive EG/648/2004

ADDAPT SILSTAB L 50 is a solvent free, Potassium Silicate solution for aqueous systems such as Plasters (Putz) and Coatings It is a stabilized Potassium Silicate solution.

ADDAPT Anticor P is a phosphorous based corrosion inhibitor. It acts as a multi metal corrosion inhibitor with emulsifying properties. It is a proprietary mixture of mono-and di-Phosphate ester and surface active ingredients.

ADDAPT® Anticor A3N is a water free aluminum anti-corrosion additive. It can also be used for multi-metal protection of Copper/Brass and Ferrous substrates. It is a proprietary blend of phosphonates and organic silicates. All constituents comply with the FDA regulation

ADDAPT® Anticor A65N is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids Salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT WaxMul WM 25 is a high melting point PE-wax emulsion giving excellent abrasion resistance and also improves the (wet) scrub resistance of Paints and Inks. It is an emulsion of Polyethylene wax in water.

ADDAPT® Anticor L 4783 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxycarbonate and Silanes. All constituents comply with the FDA regulation.

ADDAPT Foamstop SL 30 is a highly effective and versatile Foam Control Agent. It is extremely stable both on storage and in the final system. It is a Silicone Emulsion containing minerals and fatty acid based emulsifiers

Ferrocor Flash is a water-soluble corrosion inhibitor for Ferrous and Zinc rich substrates. It is a proprietary blend of Phosphate salts and Phosphonoxy esters. All constituents with the FDA regulation.

ADDAPT_x005F_x0001_ SILSTAB HL+ is a solvent free, Potassium Silicate solution optimized with a hydrophobic component for use in aqueous systems such as Renders (Putz), Textured Masonry Coatings and Interior Paints Stabilized Potassium Silicate solution with a hydrophobic component in water.

ADDAPT® Anticor AMC 2330 is an emulsifyable anti-corrosion additive for aqueous systems. It protects Aluminum as well as Magnesium and/or combinations thereof. It is a proprietary blend Phosphonates and Glycolethers All constituents are EINECS registered and comply with the FDA regulation.