Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
category
Electrical & Electronics
category
Devices & Assemblies
Products
AdvanSix
All AdvanSix
Search products
Devices & Assemblies
Applications
Automotive Electronics
Other Devices & Assemblies
Product Families
Functions
End Uses
Chemical Family
Features
All Filters
6 Products found on AdvanSix in
Devices & Assemblies
Most Viewed
TDS
With TDS
Aegis® H100ZP
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Thermoforming, Extrusion, Cast Film Extrusion, Blown Film Extrusion, Film Extrusion
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Aegis® H8202NLB
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding, Compounding
Flexural Modulus:
3010.0 - 3010.0 MPa
Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.
Aegis® H35ZI
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Flexural Modulus:
2465.0 - 2465.0 MPa
Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.
Aegis® H8202NL
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Compounding, Injection Molding
Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.
Aegis® PIR-H8202NLB
Polymer Name:
Polyamide 6 (PA 6)
Labeling Claims:
Recycled, Contains PIR Resin, Sustainable
Processing Methods:
Compounding, Injection Molding
Density:
1130.0 - 1130.0 kg/m³
Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.
Aegis® PIR-H35ZI
Polymer Name:
Polyamide 6 (PA 6)
Additives Included:
Lubricant (Unspecified)
Labeling Claims:
Recycled, Contains PIR Resin, Sustainable
Processing Methods:
Injection Molding
Density:
1120.0 - 1120.0 kg/m³
Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.