Product Resources
Online



John FacinelliTechnical SalesAsk me questions about nylon for compounding, wire and cable, or engineering plastics applications.



David LoyTechnical SalesAsk me questions about nylon for fiber and filament applications
Online



Thomas ClarkTechnical SalesAsk me questions about nylon for packaging resin for film applications and sustainability solutions.
Online



J.H KimTechnical ExpertTechnical SalesAsk me questions about nylons for film applications.



Ed AsirvathamTechnical SalesThank you for visiting AdvanSix storefront on Knowde. I'm happy to help you with questions about our Chemical Intermediate products Nadone, Naxol, Acetaldehyde oxime (AAO) and EZ-Blox.
Knowde Enhanced TDS
Identification & Functionality
Chemical Family
Polymer Name
Plastics & Elastomers Functions
Technologies
Features & Benefits
Labeling Claims
Materials Features
Applications & Uses
Markets
Applications
Plastics & Elastomers Processing Methods
Properties
Typical Properties
Value | Units | Test Method / Conditions | |
Melting Point | 220 (428) | ºC (ºF) | ASTM D-3418 |
Typical Density | 1.13 | g/cm³ | ASTM D-1505 |
Specifications
Value | Units | Test Method / Conditions | |
96% SAV | 2.72 | - | - |
Extractable Content | max. 1.2 | % | SOP-702-307 |
Moisture Content | max. 0.08 | % | ASTM D-6869 |
Viscosity (FAV) | 55 ± 3 | - | ASTM D-789 |
Storage & Handling
Processing Guidelines
Material Handling
Aegis® PIR-H55ZI is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C(176°F) is recommended. Drying time is dependent on moisture level. More information about safe handling procedures can be obtained by requesting the Safety Data Sheet.