Products
AdvanSix
Aegis® H8202NLB
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding, Compounding
Flexural Modulus: 3010.0 - 3010.0 MPa
Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® H35ZI
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding
Additives Included: Lubricant (Unspecified)
Flexural Modulus: 2465.0 - 2465.0 MPa
Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® H8202NL
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding, Compounding
Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® PIR-H8202NLB
Polymer Name: Polyamide 6 (PA 6)
Labeling Claims: Sustainable, Recycled, Contains PIR Resin
Processing Methods: Injection Molding, Compounding
Density: 1130.0 - 1130.0 kg/m³
Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® PIR-H35ZI
Polymer Name: Polyamide 6 (PA 6)
Additives Included: Lubricant (Unspecified)
Labeling Claims: Sustainable, Recycled, Contains PIR Resin
Processing Methods: Injection Molding
Density: 1120.0 - 1120.0 kg/m³
Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.