Products

AGC Chemicals Americas, Inc. Fluon® PTFE CD141E is a white, free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. The homopolymer CD141E has a medium molecular weight and is not produced using perfluorooctanoic acid ammonium salts (PFOA). This product has been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® PTFE CD127E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD127E do not use ammonium salts of perfluorooctanoic acid (PFOA), making them an environmentally friendly option. They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires, making them ideal for a wide range of industrial applications.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ PFA EA-2000 is a perfluoro resin which has been functionalized to include an adhesive group within the polymer backbone. The perfluoro backbone gives the material excellent electrical characteristics, and heat and chemical resistance, while the adhesive functionality facilitates adhesion to other materials in a one-step process, without the need for surface treatment or a separate adhesive layer. Example materials include glass cloth, polyimide, or various metals. This grade is semi-commercialized and may be available upon request. This material is supplied as pellets and packaged in 25kg plastic bags.

AGC Chemicals Americas, Inc. Fluon® PTFE CD123E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD123E do not use ammonium salts of perfluorooctanoic acid (PFOA). They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.

AGC Chemicals Americas, Inc. Fluon® PTFE G163 is a virgin granular PTFE homopolymer. It is a fine powder grade used for molding but also intended as a feedstock for making filled PTFE compounds. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.