Knowde Enhanced TDS
Identification & Functionality
- Pigment Type
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Product Code
- 467015914
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- End Uses
Colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.
Properties
- Color
- Physical Form
- Typical Physical Properties
| Value | Units | Test Method / Conditions | |
| a* | -37.2 | — | (CIELAB, 10° obs., D65) |
| b* | 20.3 | — | (CIELAB, 10° obs., D65) |
| Bulk Density | 1170 | g/L | — |
| Dispersion Quality | 0.0015 | inches | — |
| L* | 53.2 | — | (CIELAB, 10° obs., D65) |
| MFR | 22 | g/10 min | — |
| RAL | Approx. 6037 | — | — |
Technical Details & Test Data
- Processing
The products are added (approximately 1-2%) to natural ETFE and processed using conventional thermoplastic techniques such asinjection molding and melt extrusion.
Safety & Health
- Hazardous Substances
This product does not contain lead, hexavalent chromium, or cadmium, and are used in applications where RoHS (Restrictions on the use of Certain Hazardous Substances) compliance is required.
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
- Physical hazards: None
- Health hazards: None
Packaging & Availability
- Packaging Type
- Packaging
Fluon+ ETFE C-88AXM series color concentrates are packaged in a polyethylene pail containing 10 kilograms.
Storage & Handling
- Handling Precautions
- Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
- Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.