Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- HRAC/WSSA Group
- Agrochemical Functions
- Technologies
- Product Families
- Composition
ACTIVE INGREDIENTS:
Dimethylamine salt of dicamba (3,6-dichloro-o-anisic acid)* - 13.16%
2-ethylhexyl ester of 2,4-dichlorophenoxyacetic acid** - 46.34%
OTHER INGREDIENTS - 40.50%
*This product contains 10.71% 3,6-dichloro-o-anisic acid (dicamba) or 1 pound per gallon (120 g/L}.
**This product contains 30.73% 2,4-dichlorophenoxyacetic acid (2,4-D} or 2.87 pounds per gallon (344 g/L).
Features & Benefits
- Labeling Claims
- Product Features
• Range Star® XLT is readily absorbed by weeds through shoot and root uptake and translocates throughout the plant causing an accumulation in areas of active growth.
• Range Star® XLT can be mixed with other EPA registered herbicides to increase the spectrum of weed control.
• Range Star® XLT may be mixed with sprayable fl uid fertilizer in a preplant or pre-emergence application for all crops listed on the label.
• Range Star® XLT can be applied to actively growing weeds through ground, aerial, broadcast, band or spot spray applications.
- Product Information
ACTIVE INGREDIENT: 2,4-D and Dicamba
HERBICIDE GROUP: 4
ACTIVE INGREDIENT PER GALLON: 2.87 lbs. 2,4-D and 1.0 lbs. Dicamba
MODE OF ACTION: Synthetic auxin growth regulator
PACKAGING: 4x1’s, 2x2.5’s and 30’s
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- Product Use Rate
ANNUAL WEEDS
Application Rate and Timing (Applicators must follow maximum application rates in the Use-Specific Information sections of the label)
BWeeds Controlled (including ALS- and triazine-resistant) Range Star® XLT Rate Per Acre (according to weed growth stage) 0.5 PINT 1 PINT 1.5 PINT 2 PINT 3 PINT 4 PINT Beebalm, Spotted - - - pre-blossom post-bloom - Broomweed 1–3" 3" branching - branching - after branching Buckwheat, Wild - - - - - - Buffalobur - - - 1–6" - flowering Burdock - pre-flower - - - - Buttercup - pre-flower - early bloom late bloom - Chickweed, Common - seedling 1–3" - - - Cockle, Cow - < 3" - - - - Cocklebur, Common - 1–6" 6–12" 12– 18" - - Coreopsis, Plains - 1–6" - - - - Croton, Wooly 1–4" 4–12" 12–30" - - - Devilsclaw - - - < 8" - - Dogfennel - - - 10–15" - - Evening Primrose - < 2" - 2–6" - - Falseflax, Smallseed - < 2" - - - - Fleabane, Annual - 1–4" 4–8" 8" - - Flixweed - < 3" - - - - Henbit - - pre-flower - flower - Knotweed, Spp - < 3" runners - < 3" runners - actively growing Kochia - 1–6" 6–10" 10– 20" - actively growing Lambsquarters, common - 1–6" 6–10" 10– 20" - actively growing Mallow, Common - < 3" - - - - Morningglory, Ivyleaf - pre-flower - - - - Morningglory, Tall - pre-flower - post-flower - - Mustards, Annual - rosette - early bolt - - Mustards, Tansy - < 3" - - - - Pennycress, Field - - - rosette - - Pepperweed, Virginia - - 1–3" 3–6" after branching - Pigweed, Prostrate - < 3" - - - - Pigweed, Redroot - < 3" - - - - Pigweed, Smooth - < 3" - - - - Pigweed Tumble - < 3" - mature - - Poorjoe - prior to flower - - - actively growing Purslane, Common - < 3" 3–8" - - - Ragweed, Common 1–3" 3–6" 6–10" > 10" - - Ragweed, Lanceleaf 1–3" 3–6" 6–10" > 10" - - Ragweed, Western 1–3" 3–6" 6–10" > 10" - - Sedge1 - - - actively growing - - Shepherdspurse - rosette - - - - Smartweed, Pennsylvania - < 4" - - 4–12" - Sneezeweed, Bitter - 1–4" prior to flower flower - - Sowthistle - rosette - bolting - - Sunflower - 1–3" 3–6" 6–24" - - Thistle, Russian - - - rosette - - Velvetleaf - < 6" 6–20" > 20" - - 1 For use in non-food/feed crop only. Adding crop oil concentrate has shown to improve performance on actively growing annual sedge.
BIENNIAL AND PERENNIAL WEEDS
Application Rate and Timing (Applicators must follow maximum application rates in the Use-Specific Information sections of the label)
BWeeds Controlled (including ALS- and triazine-resistant) Range Star® XLT Rate Per Acre (according to weed growth stage) 0.5 PINT 1 PINT 1.5 PINT 2 PINT 3 PINT 4 PINT Bindweed, Field - - - - - actively growing Bittercress5 - 2–3" - - - - Buckeye, species - - - - full leaf - Bullnettle2, 5 - - - flower - - Chicory - - - - early bolting - Clover, bur - - pre-flower - - - Dandelion, Common - rosette - bolting - - Dewberry, Southern1 - - - - - spring or fall Dock, Curly - - prior to bolting - after bolting - Elderberry2 - - - - - actively growing Goldenrod, Missour - - - 3–15" flower - Goldenweed, Common - - - - - actively growing Groundsel, Texas - rosette post bolting - - - Honeysuckle, Hairy - - - - spring or fall - Horsenettle, Carolina - - - - - flower or berry Ivy, Poison - - - after bloom - - Knapweed, Black2 - - - - - actively growing Knapweed, Russian2 - - - - - actively growing Knapweed, Spotted - - - - - actively growing Marshelder5 - - - < 12" 12"/pre-bloom - Mesquite - - - - - 45-90 days after bud-break Milkweed1, 5 - - - pre-flower - flower Nightshade, Silverleaf - - - full flower - actively growing Nightshade, Black1 - - - full flower - actively growing Persimmon, Eastern3 - - - - - actively growing Prickly Lettuce - - - rosette - actively growing Rabbitbrush2 - - - - - actively growing Ragwort, Tansy - - - rosette - actively growing Redvine2 - - - - - actively growing Sagebrush, Fringed2 - - - - - actively growing Smartweed - - - - - actively growing Sorrel, Red - - rosette bolting flower actively growing Sowthistle2 - - - - - actively growing Spurge, Leafy2 - - - - - full leaf Tallow Tree, Chinese4, 5, 6 - - - - - full leaf Thistle, Bull - - rosette bolting - actively growing Thistle, Canada2 - - - - - actively growing Thistle, Musk - - - rosette/bolting - - Thistle, Plumeless - - rosette bolting - - Vetch, Hairy - 1–4" 4–8" 8" full flower - - Yankeeweed - - - 10–18" - rosette Yellow Starthistle - - - - - rosette 1 May require repeat applications.
2 Labeled rate provides top growth suppression only.
3 For improved root kill or woody species such as mesquite and eastern persimmon, spray
4 pints of Range Star® XLT per acre each year for 3 consecutive years. For increased control of weeds such as blackberry and dewberry, Range Star® XLT may be tank mixed with Ally® herbicide (0.1-0.2 ounces per acre), if labeled for the use site. 4 A second application may be required the following growing season under dense populations.
5 Not for use in California.
6 Treat with 4 pints of Range Star® XLT per acre after full leaf but before leaves develop a heavy cuticle (waxy covering) in periods of extreme heat or drought stress.
- Directions for use
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. Do not apply this product through any type of irrigation system. Use of this product in certain portions of California, Oregon and Washington is subject to the January 22, 2004 Order for injunctive relief in Washington Toxics Coalition, et al. v. EPA, C01-0132C, (W.D. WA). For further information, please refer to EPA Web Site: http://www.epa.gov/espp.
Properties
- Formulation Type
- Physical Form
Safety & Health
- Precautionary Statements
Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse.
- Personal Protective Eqiupment
All mixers, loaders, and applicators and other handlers must wear:
- Long-sleeved shirt and long pants,
- Chemical-resistant gloves such as butyl rubber, natural rubber, neoprene rubber or nitrile rubber (except for applicators using groundboom equipment, pilots and flaggers)
- Shoes plus socks, and
- Protective eyewear (goggles or face shield).
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse them. Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
- User Safety Recommendations
Users should:
- Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after hanaling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
- Environmental Hazards
This pesticide is toxic to fish and aquatic invertebrates. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when disposing of equipment washwaters or rinsate. Apply this product only as directed on label. This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Application around a cistern or well may result in contamination of drinking water or groundwater. Most cases of groundwater contamination involving phenoxy herbicides such as 2,4-D have been associated with mixing/loading and disposal sites. Caution must be exercised when handling 2,4-D pesticides at such sites to prevent contamination of groundwater supplies. Use of closed systems for mixing or transferring this pesticide will reduce the probability of spills. Placement of the mixing/loading equipment on an impervious pad to contain spills will help prevent groundwater contamination.
Storage & Handling
- Storage and Disposal
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE: Store in original container in a well-ventilated area separately from fertilizer, feed and foodstuffs. Avoid crosscontamination with other pesticides. Spillage or leakage should be contained and absorbed with clay granules, sawdust, or equivalent material for disposal.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Triple rinse pesticide from containers and use rinsates in the pesticide application. Improper disposal of excess pesticide, spray mixture, or rinsate, is a violation of Federal Law and may contaminate groundwater. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.