Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- HRAC/WSSA Group
- Agrochemical Functions
- Technologies
- Product Families
- Composition
ACTIVE INGREDIENT:
ammonium salt of imazamox: 2-[4,5-dihydro-4-methyl-4-(1 -methylethy)-5 -oxo- 1 H-imidazol-2-yl]-5-(methoxymethyl)-3-pyridinecarboxylic acid* - 12.1%
OTHER INGREDIENTS - 87.9%
*Equivalent to 11.4% 2-[4,5-dihydro-4-methyl-4-(1 -methylethyl)-5-oxo-1H-imidazol-2-yl]-5-methoxymethy)- 3-pyridinecarboxylic acid
1 gallon contains 1.0 pound of active ingredient as the free acid.
Features & Benefits
- Labeling Claims
- Product Features
• Vulture™ is registered for use on alfalfa, beans (dry), chicory, clover grown for seed, edamame, lima beans (succulent), peas (dry), pea (English), snap bean and soybean.
• Vulture™ is rainfast within 1 hour after application.
• Vulture™ can be tank mixed or applied sequentially with another EPA registered herbicide that has a different mode of action to ensure acceptable weed control when ALS-resistant weeds are present.
• Vulture™ provides additional flexibility by having no preharvest interval (PHI) for any crop
- Product Information
ACTIVE INGREDIENT: Imazamox
HERBICIDE GROUP: 2
ACTIVE INGREDIENT PER GALLON: 1.0 lb.
MODE OF ACTION: ALS Inhibitor
PACKAGING: 4x1 gallon
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- Weed Control
- Apply Vulture™ to actively growing weeds at the appropriate stage of growth. Weed heights exceeding labeled recommendations may result in poor control.
- Use either a non-ionic surfactant, methylated seed oil, crop oil concentrate or a high surfactant oil concentrate with all Vulture™ applications.
- Apply Vulture™ by ground application in a minimum spray volume of 10 gallons per acre to ensure proper spray coverage on target weeds.
- Product Use Rate
ALFALFA
Apply VultureTM early postemergence when weeds are actively growing and before they exceed a height of inches, unless otherwise indicated. Delay application until the majority of the weeds are at the specified growth stage. Apply VultureTM to actively growing crop and weeds.
USE RATE
Apply VultureTM early postemergence at a broadcast rate of to 4 to 6 fl. ozs./acre (0.031 to 0.047 lb. imazamox ae/acre) to seedling or established alfalfa grown for forage, hay, or seed. At the specified application rate, 1 gallon of VultureTM will treat 21 to 32 acres.
SEEDLING ALFALFA Apply VultureTM when seedling alfalfa is in the second trifoliate stage or larger and when the majority of weeds are 1 -inch to 3-inches tall. When applied to alfalfa grown for seed, apply VultureTM before bud formation. For prostrate growing weeds (such as mustards and filaree), apply VultureTM before the rosette exceeds 3 inches. When VultureTM is applied to seedling alfalfa, there may be a temporary reduction in growth. Alfalfa soon outgrows any effects of the herbicide.
ALFALFA RESTRICTIONS:
• DO NOT make more than one VultureTMapplication to alfalfa per year (growing season).
• DO NOT apply more than 6 fl. ozs. VultureTM /acre (0.047 lb. imazamox ae/acre) to alfalfa per year (growing season).
• DO NOT make sequential applications of imazethapyr herbicide followed by VultureTM (or VultureTM followed by Pursuit®) within a 60-day time frame because of increased potential for alfalfa crop response.
DRY BEANS AND DRY PEAS
[OTHER THAN ENGLISH PEA. LIMA BEAN (SUCCULENT), SNAP BEAN, CLEARFIELD LENTIL]
DO NOT apply VultureTM herbicide to dry beans and dry peas in California.
VultureTM may be applied to the following dry beans and dry peas:
DRY BEANS DRY PEAS Adzuki
Anasazi
Black
Black turtle
Cranberry
Great Northern
Lablab
Lima (dry)
Navy Pink
Pinto
Red Kidney
Small red
Small white
Dry edible peas (field peas)
Southern pea (cow pea)
DRY BEANS AND DRY PEAS RESTRICTIONS:
• DO NOT apply VultureTM to succulent pea, snap bean, or fresh lima (except as specifically directed below).
• DO NOT apply VultureTM to chickpea (garbanzo bean) or lentil.
• DO NOT apply more than 6 fl. ozs. VultureTM /acre (0.047 lb. imazamox ae/acre) to alfalfa per year (growing season).
USE RATE
Apply VultureTM postemergence to dry beans and dry peas at a broadcast rate of 4 fl. ozs./acre (0.031 lb. imazamox ae/acre). At this application rate, one gallon will treat 32 acres of dry beans and dry peas.
ADDITIONAL MIXING INSTRUCTIONS FOR DRY BEANS AND DRY PEAS
VultureTM application may be made to dry beans and dry peas with or without addition of fertilizer. Addition of nitrogen-based fertilizer, such as ammonium sulfate or liquid fertilizers (such as 28-0-0), may improve weed control but also increases the likelihood of dry bean response. When nitrogen and/or crop oil are added to the mixture, add Basagran® herbicide (at 6 fl. ozs. to 16 fl. ozs./A) as a tank mix partner to minimize crop response.
For application to dry peas, ALWAYS add Basagran to the spray mixture, regardless of additives used. For enhanced grass activity, add crop oil concentrate instead of surfactant. Basagran at 16 fl. ozs./A will enhance control of common lambsquarters and kochia. Basagran application at rates higher than 16 fl. ozs./A may reduce grass weed control.
DRY BEANS AND DRY PEAS RESTRICTIONS:
• VultureTM application must be made before dry beans and dry peas bloom.
• DO NOT make more than one VultureTM application to dry beans and dry peas per year (growing season).
• DO NOT apply more than 4 fl. ozs. VultureTM /acre (0.031 lb. imazamox ae/acre) to dry beans and dry peas per year (growing season).
- Directions for use
It is a violation of federal law to use this product in a manner inconsistent with its labeling. This label must be in the possession of the user at the time of pesticide application. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation.
Properties
- Formulation Type
- Physical Form
Safety & Health
- Precautionary Statements
CAUTION. Harmful if absorbed through skin or inhaled. Avoid breathing spray mist. Avoid contact with skin, eyes, or clothing.
- Personal Protective Eqiupment
Applicators and other handlers must wear:
1. Long-sleeved shirt and long pants
2. Chemical-resistant gloves such as barrier laminate, butyl rubber >14 mils, nitrile rubber > 14 mils, neoprene rubber > 14 mils, natural rubber {includes natural rubber blends and laminates) >14 mils, polyethylene, polyvinyl’ chloride (PVC) > 14 mils, or viton > 14 mils
3. Shoes plus socks
Follow the manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or heav- ily contaminated with this product’s concentrate. DO NOT reuse them.
- User Safety Recommendations
Users should:
1. Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
2. Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
3. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
- Environmental Hazards
This pesticide may be hazardous to plants outside the treated area. DO NOT apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark except as directed in this label. Off-site movement from spray drift, volatilization, and runoff may be hazardous to neighboring crops and vegetative habitat utilized for food and cover by wildlife and aquatic organisms. DO NOT contaminate water when disposing of equipment washwater or rinsate.
Storage & Handling
- Storage and Disposal
DO NOT contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: KEEP FROM FREEZING. DO NOT store below 32° F.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product must be disposed of on-site or at an approved waste disposal facility.