Detergent 8® Low-Foaming Ion-Free Detergent

1 of 1 products in this brand

Detergent 8 is a nonionic, detergent for labware washers, PC board washers, power-spray systems, ultrasonic and manual cleaning. Removes oils, resins rosins, and fluxes from PC circuit boards, electronic parts, phosphate sensitive labware and nuclear contaminated equipment with no interfering conductive residues. Excellent replacement for solvent cleaning. Dilute 3:100. pH 11.

  • Replace solvent cleaning
  • Concentrated to save you money
  • Biodegradable and readily disposable
  • Penetrating wetting power to save you time
  • Free rinsing to give you reliable results and no interfering residues
  • Contains no phosphate, sulfur, chlorine, metal cation, halide, borate, silicate, carbonate, chlorocarbon, fluorocarbon or chelating ingredients

Product Type: Cleaner, Detergents

Certifications & Compliance: FDA Compliant, USDA Certified

Application Area: Electronic Components, Equipment, Machine Parts, Medical Devices, Pipes, Printed Circuit Boards, Tanks, Ultrasonic Cleaner

Compatible Substrates & Surfaces: Aluminum, Ceramic, Copper, Elastomers & Rubbers, Fiberglass, Glass, Magnesium, Metal, Plastics, Steel

Features: Degreasing, Disposable, Effective Particle Removal, Effective Soil Removal, Excellent Wetting Behaviour, Free Rinsing, Good Hard Water Stability, Low Foaming, Low Residuals

    Knowde Enhanced TDS

    Identification & Functionality

    Product Type

    Features & Benefits

    Applications & Uses

    Application Method
    Uses
    • Used to Clean: Circuit boards, electronic parts, phosphate sensitive labware, nuclear reactor cavities, delicate industrial parts and nuclear contaminated equipment during outage. FDA certified.
    • Used to Remove: Resins, rosins, oils, dirt, grime, particulates, residues, fluxes, chemicals and solvents.
    • Surfaces Cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, ceramic, plastic, and circuit boards. Can be used, with prompt rinsing, on soft metals such as copper, aluminum, silver, and gold. Aluminum can darken and mixed metal galvanic reactions can occur. Corrosion testing is advisable.
    • Cleaning method: Soak, brush, sponge, cloth, ultrasonic, ware washer, spray washer, pressure washer and flow through CIP (clean-in-place).
    Application Directions

    For manual, soak and ultrasonic use, make a 3-5% solution (4-6 oz per gal, or 30–50 ml per liter) in warm or hot water. An oily, milky solution is normal. Protective gloves and eyewear are recommended. For spray machines, add detergent at the hot water wash cycle to make a 2% solution (2.1/2 oz per gal, or 20 ml per liter). For difficult soils, raise water temperature and use more detergent. Rinse thoroughly-preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. Used on a range of glass, ceramic, plastic and metal surfaces. Corrosion testing is advisable.

    Properties

    Physical Form
    Physical Properties
    ValueUnitsTest Method / Conditions
    pH (in 1% solution)11

    Regulatory & Compliance

    Certifications & Compliance