Ledizolv® Lead Specific Cleaner

1 of 1 products in this brand

Ledizolv® Lead Specific Cleaner is scientifically formulated for use in the clean-up and control of LCD hazards. Ledizolv contains a synergistic blend of chelating agents, wetting agents, emulsifiers and dispersants that are optimized to remove lead contaminated dust. Unlike TSP or other phosphate detergents, it is a mild pH, phosphate free and completely biodegradable. USDA authorized. Dilute 2:100. pH 5.4

  • Mild pH gives it excellent handling and safety characteristics.
  • Free rinsing with no risk of leaving phosphate film on surfaces.
  • Biodegradable and readily disposable into sinks and drains.

Product Type: Cleaner

Application Area: Drains, Hard Surfaces

Compatible Substrates & Surfaces: Ceramic, Concrete, Glass, Plastics, Tile, Wood

Certifications & Compliance: USDA Certified

Features: Disposable, Effective Soil Removal, Excellent Rinsability, Excellent Sequestering Ability, Excellent Wetting Behaviour, Free Rinsing, Good Hard Water Stability, High Dispersibility, High Foaming, Highly Emulsifying, Increases Foam Stability

Similar Products

    Knowde Enhanced TDS

    Identification & Functionality

    Product Type

    Features & Benefits

    Applications & Uses

    Application Area
    Compatible Substrates & Surfaces
    Uses
    • Used to clean: Walls, window components, vents, baseboards, floors, and any other surfaces or crevices.
    • Used to remove: Lead contaminated dust.
    • Surfaces cleaned: Glass, ceramic, plastic, tile, concrete, gypsum board, plaster, wood, vinyl, and metals.
    • Cleaning method: Wet mop or spray on application.
    Measurements
    Sizes Gal. of 2% Solution Made Square Feet Cleaned
    16 oz bottle 6 1200
    Case of 25x16 ounces 150 32,000
    1 Gallon Bottle 50 10,000
    Case of 4x1 Gallons 200 40,000
    5 Gallon Pail 250 50,000
    15 Gallon Drum 750 150,000
    55 Gallon Drum 2750 550,000
    Application Directions

    Make a fresh 2% solution (5 tbsp. per gal., 2.5 oz. per gal. or 20 ml per liter) in warm water. Clean by wet mop or spray on application. RINSE THOROUGHLY with clean water. Used on a wide range of glass, ceramic, plastic, tile, concrete, gypsum board, plaster, wood, vinyl, metal surfaces.

    Properties

    Physical Form
    Physical Properties
    ValueUnitsTest Method / Conditions
    pH Value5.4

    Regulatory & Compliance

    Certifications & Compliance