CYMEL

CYMEL® NF 2000A

CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings.

CYMEL

CYMEL® 327-70

CYMEL® 327-70 resin is the diluted resin of CYMEL® 327 resin by butyl cellosolve to 70% solid. The resin chemical structure of CYMEL® 327-70 resin is completely same to CYMEL® 327 resin. CYMEL® 327-70 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. CYMEL® 327-70 resin is very reactive and has a tendency towards self-condensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOC in high solids formulations.

CYMEL

CYMEL® 1141

CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This product contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 resin only in dark single coat applications or primers and not in pastel colors.

CYMEL

CYMEL® XW 3106 Resin

CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate high performance coatings for heat sensitive substrates. These systems have excellent early hardness, resistance properties, appearance and hot/cold cycle flexibility.

CYMEL

CYMEL® UI-27-EI Resin

CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is not suitable for exterior applications.

CYMEL

CYMEL® UI-20-E Resin

CYMEL® UI-20-E resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

CYMEL

CYMEL® UI-19-I Resin

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes this product suitable for ambient and low bake industrial wood finishes.

CYMEL

CYMEL® UB-30-B Resin

CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes it suitable for a wide range of industrial baking applications. Because of the limited UV resistance properties of urea resins, this product is not suitable for exterior applications.

CYMEL

CYMEL® UB-24-BX Resin

CYMEL® UB-24-BX resin is a partially n-butylated urea crosslinker supplied in a mixture of n-butanol and xylene. Its fast reaction speed and film hardness development combined with excellent adhesion properties makes it suitable for industrial primer formulations where electrostatic spray application is required. Because of the limited UV resistance properties of urea resins, this product is not suitable for exterior applications.

CYMEL

CYMEL® U-80 Resin

CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates.

CYMEL

CYMEL® U-663 Resin

CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission and high film gloss is required.

CYMEL

CYMEL® U-662 Resin

CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission is required.

CYMEL

CYMEL® U-227-8 Resin

CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels.